Model No. WF35RTIACDNNB
►Size: 3.5"
►Resolution : 320x240 dots (320240 TFT)
►View Direction: 12H
►Interface: SPI / MCU / RGB
►Driver IC：SSD2119
►Control-Board : No
►Brightness(cd/m²): 400
►Frame Through Hole: Option
►Touch Screen : Without touch screen
The WF35RTIACDNNB is a 3.5-inch thin film transistor (TFT) LCD module featuring a QVGA 320x240 resolution. This thin film transistor module incorporates the SSD2119 IC, supporting RGB, SPI, and MCU interfaces, with a supply voltage (VCI) ranging from 2.5V to 3.6V (typical value: 3.0V).
It features an anti-glare surface panel, a 12 o’clock viewing direction, and gray scale inversion at 6 o'clock, maintaining an optimal 4:3 aspect ratio for various applications. Designed in landscape mode, the WF35RTIACDNNB offers a brightness of 400 nits (typical value), providing clear visibility even in well-lit environments.
This thin film transistor module operates reliably within a temperature range of -20℃ to +70℃, with storage temperature capabilities extending from -30℃ to +80℃. Its TFT technology ensures stable performance, making it suitable for industrial control systems, medical devices, and self-service applications.
| Item | Dimension | Unit |
|---|---|---|
| Size | 3.5 | inch |
| Dot Matrix | 320 × RGB × 240 (TFT) | dots |
| Module dimension | 76.84(W) × 63.84(H) × 3.27(D) | mm |
| Active area | 70.08 × 52.56 | mm |
| Dot pitch | 0.073 × 0.219 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| Interface | 8-bit/16-bit CPU or option other mode (build in controller) | |
| Aspect Ratio | 4:3 | |
| Backlight Type | LED, Normally White | |
| IC | SSD2119 | |
| Touch Screen | Without touch screen | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | 70 | ℃ |
| Storage Temperature | TST | -30 | － | 80 | ℃ |
| Item | Symbol | MIN | TYP | MAX | Unit |
|---|---|---|---|---|---|
| Power supply voltage | VCI | 2.5 | 3.3 | 3.6 | V |
| Power supply pin of IO pins | VDDIO | 1.4 | 3.3 | 3.6 | V |
| Current consumption | IVCI+IVDDIO | - | - | 10 | mA |
| Dot clock | DCK | - | 5.5 | 8.2 | MHz |
| No. | Symbol | Description |
|---|---|---|
| 1 | VCI | Booster input voltage pin |
| 2 | VCI | Booster input voltage pin |
| 3 | VSS | Ground |
| 4 | VDDIO | Voltage input pin for logic |
| 5 | VSS | Ground |
| 6 | RESET | Reset Signal pin (“Low” is enable) |
| 7 | DC/SDC | Data or Command select PIN. |
| 8 | E/RD | 6800 system: E(enable signal) 8080 system : RD(read strobe signal) Serial mode: Not use and should be connected to VDDIO or VSS |
| 9 | WR | 6800 system : RW (indicates read cycle when high ,write cycle when low) 8080 system : WR (write strobe signal) |
| 10 | CS | Chip select |
| 11 | SCL | Serial Clock. |
| 12 | SD0 | Serial Data output |
| 13 | SDI | Serial Data Input |
| 14 | WSYNC | Ram write synchronization output. Leave it OPEN when not used. |
| 15~32 | D17~D0 | Data bus |
| 33 | VSS | Ground |
| 34 | DOTCLK | Dot-clock signal and oscillator source |
| 35 | HSYNC | Line Synchronous Signal |
| 36 | VSYNC | Frame Synchronous Signal |
| 37 | DE | Display enable pin for controller |
| 38 | VSS | Ground |
| 39~42 | PS0~PS3 | Interface select PIN |
| 43 | VSS | Ground |
| 44~47 | NC | NC |
| 48 | VSS | Ground |
| 49 | LEDK | Backlight LED Cathode |
| 50 | LEDA | Backlight LED Anode. |
| PS3 | PS2 | PS1 | PS0 | Interface Mode | Data bus input |
|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 16-bit 6800 parallel interface | D[17:10],D[8:1] |
| 0 | 0 | 0 | 1 | 8-bit 6800 parallel interface | D[17:10] |
| 0 | 0 | 1 | 0 | 16-bit 8080 parallel interface | D[17:10],D[8:1] |
| 0 | 0 | 1 | 1 | 8-bit 8080 parallel interface | D[17:10] |
| 0 | 1 | 0 | 0 | 9-bit generic D[9:16] (262k colour) + 3-wire SPI If 65K color, D12 shorts to D17 internally | |
| 0 | 1 | 0 | 1 | 16-bit generic (262k colour) + 3-wire SPI | |
| 0 | 1 | 1 | 0 | 18-bit generic (262k colour) + 3-wire SPI | |
| 0 | 1 | 1 | 1 | 6-bit generic D[8:3] (262k colour) + 3-wire SPI | |
| 1 | 0 | 0 | 0 | 18-bits 6800 parallel interface | D[17:0] |
| 1 | 0 | 0 | 1 | 9-bits 6800 parallel interface | D[17:9] |
| 1 | 0 | 1 | 0 | 18-bits 8080 parallel interface | D[17:0] |
| 1 | 0 | 1 | 1 | 9-bits 8080 parallel interface | D[17:9] |
| 1 | 1 | 1 | 0 | 3-wire SPI | |
| 1 | 1 | 1 | 1 | 4-wire SPI |
thin film transistor, thin film transistor module
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
