Model No. WF35RTIACDNNB
►Size: 3.5"
►Resolution : 320x240 pixels (320240 TFT)
►View Direction: 12H
►Interface: SPI / MCU / RGB
►Driver IC：SSD2119
►Control-Board : No
►Brightness(cd/m²): 400
►Frame Through Hole: Option
►Touch Screen : Without touch screen
The WF35RTIACDNNB is a 3.5 inch TFT LCD module with QVGA 320x240 resolution, designed for embedded and industrial applications. This 3.5 inch TFT LCD display integrates the SSD2119 or equivalent IC and supports 8-bit/16-bit CPU, SPI+RGB, and SPI interfaces for flexible integration into embedded systems. The supply voltage (VCI) ranges from 2.5V to 3.6V, with a typical value of 3.0V.
This 3.5 inch LCD display is a TN, normally white, transmissive TFT panel with an anti-glare surface. It features a 12 o'clock viewing direction and 6 o'clock gray scale inversion. With a 4:3 aspect ratio, landscape orientation, and 400 nits typical brightness, this 3.5" TFT LCD display is suitable for compact HMI, control panels, and embedded device interfaces.
As a compact 3.5" LCD module, the WF35RTIACDNNB has a module size of 76.84 x 63.84 x 3.27 mm and an active area of 70.08 x 52.56 mm. The module is supplied without a touch panel and operates reliably at temperatures from -20℃ to +70℃, with storage temperatures from -30℃ to +80℃. These features make this 3.5" TFT display suitable for industrial control systems, medical devices, handheld equipment, and self-service terminals.
| Item | Dimension | Unit |
|---|---|---|
| Size | 3.5 | inch |
| Dot Matrix | 320 × RGB × 240 (TFT) | dots |
| Module dimension | 76.84(W) × 63.84(H) × 3.27(D) | mm |
| Active area | 70.08 × 52.56 | mm |
| Dot pitch | 0.073 × 0.219 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| Interface | 8-bit/16-bit CPU or option other mode (build in controller) | |
| Aspect Ratio | 4:3 | |
| Backlight Type | LED, Normally White | |
| IC | SSD2119 | |
| Touch Screen | Without touch screen | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | 70 | ℃ |
| Storage Temperature | TST | -30 | － | 80 | ℃ |
| Item | Symbol | MIN | TYP | MAX | Unit |
|---|---|---|---|---|---|
| Power supply voltage | VCI | 2.5 | 3.3 | 3.6 | V |
| Power supply pin of IO pins | VDDIO | 1.4 | 3.3 | 3.6 | V |
| Current consumption | IVCI+IVDDIO | - | - | 10 | mA |
| Dot clock | DCK | - | 5.5 | 8.2 | MHz |
| No. | Symbol | Description |
|---|---|---|
| 1 | VCI | Booster input voltage pin |
| 2 | VCI | Booster input voltage pin |
| 3 | VSS | Ground |
| 4 | VDDIO | Voltage input pin for logic |
| 5 | VSS | Ground |
| 6 | RESET | Reset Signal pin (“Low” is enable) |
| 7 | DC/SDC | Data or Command select PIN. |
| 8 | E/RD | 6800 system: E(enable signal) 8080 system : RD(read strobe signal) Serial mode: Not use and should be connected to VDDIO or VSS |
| 9 | WR | 6800 system : RW (indicates read cycle when high ,write cycle when low) 8080 system : WR (write strobe signal) |
| 10 | CS | Chip select |
| 11 | SCL | Serial Clock. |
| 12 | SD0 | Serial Data output |
| 13 | SDI | Serial Data Input |
| 14 | WSYNC | Ram write synchronization output. Leave it OPEN when not used. |
| 15~32 | D17~D0 | Data bus |
| 33 | VSS | Ground |
| 34 | DOTCLK | Dot-clock signal and oscillator source |
| 35 | HSYNC | Line Synchronous Signal |
| 36 | VSYNC | Frame Synchronous Signal |
| 37 | DE | Display enable pin for controller |
| 38 | VSS | Ground |
| 39~42 | PS0~PS3 | Interface select PIN |
| 43 | VSS | Ground |
| 44~47 | NC | NC |
| 48 | VSS | Ground |
| 49 | LEDK | Backlight LED Cathode |
| 50 | LEDA | Backlight LED Anode. |
| PS3 | PS2 | PS1 | PS0 | Interface Mode | Data bus input |
|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 16-bit 6800 parallel interface | D[17:10],D[8:1] |
| 0 | 0 | 0 | 1 | 8-bit 6800 parallel interface | D[17:10] |
| 0 | 0 | 1 | 0 | 16-bit 8080 parallel interface | D[17:10],D[8:1] |
| 0 | 0 | 1 | 1 | 8-bit 8080 parallel interface | D[17:10] |
| 0 | 1 | 0 | 0 | 9-bit generic D[9:16] (262k colour) + 3-wire SPI If 65K color, D12 shorts to D17 internally | |
| 0 | 1 | 0 | 1 | 16-bit generic (262k colour) + 3-wire SPI | |
| 0 | 1 | 1 | 0 | 18-bit generic (262k colour) + 3-wire SPI | |
| 0 | 1 | 1 | 1 | 6-bit generic D[8:3] (262k colour) + 3-wire SPI | |
| 1 | 0 | 0 | 0 | 18-bits 6800 parallel interface | D[17:0] |
| 1 | 0 | 0 | 1 | 9-bits 6800 parallel interface | D[17:9] |
| 1 | 0 | 1 | 0 | 18-bits 8080 parallel interface | D[17:0] |
| 1 | 0 | 1 | 1 | 9-bits 8080 parallel interface | D[17:9] |
| 1 | 1 | 1 | 0 | 3-wire SPI | |
| 1 | 1 | 1 | 1 | 4-wire SPI |
thin film transistor, thin film transistor module
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.