Home Products TFT LCD Standard TFT Color Display WF32CTLAJDNT0
3.2 TFT LCD, 3.2 TFT LCD Module, 3.2 LCD Display
3.2 TFT LCD, 3.2 TFT LCD Module, 3.2 LCD Display

3.2" TFT LCD Module, 3.2" LCD Display

Model No. WF32CTLAJDNT0

►3.2 TFT LCD Display
►Resolution : 240 x 320 dots
►View Direction: 6H
►Interface: MCU
►Built-in Controller: ILI9341
►Control-Board : No
►Brightness(cd/m²): 180
►Frame Through Hole: No
►Touch Screen : Resistive Touch Screen

PREV. BACK to LIST NEXT

DESCRIPTION

Winstar WF32C is a 3.2 inch diagonal full color 240x320 TFT LCD module. This module is built in with ILI9341V IC; it supports 8/ 9/ 16/ 18-bit 8080-series interface and 3-wire or 4-wire SPI interface. WF32C model is having module dimension of 54.04 x 77.6 mm and Active area size of 48.6 x 64.8 mm; it integrated ILI9341V controller on module, logic voltage range from 2.5v to 3.3v; it allows direct connection to 3.3v processors.

This 3.2" TFT LCD module is portrait mode, if you would like to use it as landscape mode please contact with us for more technical support. WF32C 3.2" TFT LCD module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

DRAWING

3.2" TFT LCD Module, 3.2 LCD Display - WF32CTLAJDNT0

SPECIFICATIONS

Interface

NO Symbol Function I/O
1 YU Y up for touch panel －
2 XL X left for touch panel －
3 YD Y down for touch panel －
4 XR X right for touch panel －
5 VCI Power supply(TYP: 2.8V). P
6 IOVCC Power supply(TYP:1.8V/2.8V). P
7~24 DB17~DB0 Data bus I/O
25 SDA Serial data input/output I/O
26 DOTCLK Data enable signal in RGB interface. I
27 DE A data ENABLE signal in RGB I/F mode I
28 HSYNC Horizontal synchronizing signal in RGB interface I
29 VSYNC Vertical synchronizing signal in RGB interface I
30 NRD Read enable pin I80 parallel bus system interface I
31 NWR_DNC NWR Write enable pin I80 parallel bus system interface
DNC Command/parameter or display data selection pin in serial bus system interface		 I
32 DNC_SCL DNC Command/parameter or display data selection pin in parallel interface
SCL Serial data clock in serial bus system Interface		 I
33 NCS Chip select signal I
34 NRESET System Reset I
35 IM0 System interface select:
IM2 IM1 IM0 MCU-Interface Mode DB Pin in use
Register/Content GRAM
0 0 0 80 MCU 8-bit bus
interface I		 D[7:0] D[7:0]
0 0 1 80 MCU 16-bit bus
interface I		 D[7:0] D[15:0]
0 1 0 80 MCU 9-bit bus
interface I		 D[7:0] D[8:0]
0 1 1 80 MCU 18-bit bus
interface I		 D[7:0] D[17:0]
1 0 1 3-wire 9-bit data serial
interface I		 SDA: In/Out
1 1 0 4-wire 8-bit data serial
interface I		 SDA: In/Out
I
36 IM1
37 IM2
38 GND Ground P
39 LEDA Anode of LED backlight. P
40 LEDK Cathode of LED backlight. P

General Specifications

Item Dimension Unit
Size 3.2 inch
Dot Matrix 240 × RGB × 320(TFT) dots
Module dimension 54.04 (W) × 77.6 (H) × 2.65(D) mm
Active area 48.6 × 64.8 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Backlight Type LED, Normally White
Touch Screen Resistive Touch Screen
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Power supply voltage VDD   2.5 - 3.3 V
Power supply voltage IOVCC   1.65   3.3 V
Input high voltage Vih   0.7IOVCC - IOVCC V
Input low voltage Vil   GND - 0.3IOVCC V
Output high voltage Voh Ioh=-1.0mA 0.8 IOVCC - IOVCC V
Output low voltage Vol Iol=1.0mA GND - 0.2 IOVCC V
Current consumption Idd - - 9 - mA
go top
close