1.77" 128x160 High Brightness TFT LCD
Model No. WF18HSLAADNN0
►Size:1.77 inch
►Resolution:128x160 dots
►View Direction: 6H
►Interface: SPI
►Driver IC:ST7735S
►Control-Board : No
►Brightness(cd/m²): 900
►Frame Through Hole: No
►Touch Screen : Without touch screen
Description
WF18HSLAADNN0 is a portrait mode 128x160 TFT LCD display module with a diagonal size of 1.77 inches, and the active area is 28.03 x 35.04 mm. This TFT display provides a resolution of 128 x 160 dots, a high brightness of 900 cd/m2 (typical value), contrast ratio of 500:1 (typical value), view direction of 6 o'clock, and gray scale Inversion direction of 12 o'clock.
The module is built-in with ST7735S driver IC, supporting SPI interfaces. Its power supply voltage is from 2.5V to 3.7V, with a typical value of 2.75V. The operation temperatures range from -20℃ to +70℃, while the storage temperatures cover from -30℃ to + 80℃. WF18HSLAADNN0 can be used in a wide range of applications, from portable devices and household appliances to toys and medical devices.
DRAWING
SPECIFICATIONS
Interface
LCM PIN Definition
Pin | Symbol | I/O | Function |
---|---|---|---|
1 | LED+ | P | Back light anode |
2 | LED- | P | Back light cathode |
3 | SPI4W (VCC=4 WIRE) |
I | - SPI4W='0', 3-line SPI Enable. - SPI4W='1', 4-line SPI Enable. -If Not Used, Please fix this Pin at DGND Level. |
4 | VCC | P | Power Supply. |
5 | GND | P | Ground |
6 | CS | I | Chip enable (CSX) |
7 | RST | I | Reset signal (RESX) |
8 | SDA | I/O | Serial input/output signal in serial interface mode. |
9 | SCL | I | In Serial Interface, this is used as SCL. |
10 | D/C | I | Data/ command selection. (D/CX) |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 1.77 | inch |
Dot Matrix | 128 × RGB × 160(TFT) | dots |
Module dimension | 34.0(W) × 45.83(H) × 2.65(D) | mm |
Active area | 28.03 × 35.04 | mm |
Dot pitch | 0.073 × 0.219 | mm |
LCD type | TFT, Normally White, Transmissive | |
View Direction | 6 o'clock | |
Gray Scale Inversion Direction | 12 o'clock | |
Aspect Ratio | Portrait | |
IC | ST7735S or Equivalent | |
Interface | SPI | |
Backlight Type | LED, Normally White | |
Touch Panel | Without Touch Panel | |
Surface | Anti-Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
1.Operating conditions:Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage For Analog | VCI | - | 2.5 | 2.75 | 3.7 | V |
Supply LCM current | ICI(mA) | - | - | 0.9 | 2 | mA |
2. LED driving conditions:
Parameter | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
LED current | - | - | 40 | - | mA |
Power Consumption | - | - | 124 | - | mW |
LED voltage | VBL+ | 2.9 | 3.1 | 3.4 | V |
LED Life Time | - | - | 50,000 | - | Hr |