Model No. WF24HTLAJDNN0
►2.4" TFT LCD / TFT 2.4"
►Resolution: 240×320 pixels
►View Direction: 6H
►Interface: MCU
►Controller IC：ILI9341V
►Control-Board: No
►Brightness(cd/m²): 500
►Frame Through Hole: No
►Touch Screen: Without Touch Screen
WF24HTLAJDNN0 is a 2.4-inch TFT LCD display with a 240x320 pixel resolution. This 2.4-inch TFT LCD module is designed for portrait orientation and integrates the ILI9341V controller IC for TFT driving and display control. It supports an 8/16-bit 8080-series parallel MCU interface. The module size is 42.72 × 60.26 × 2.25 mm, with an active area of 36.72 × 48.96 mm. The logic supply voltage range is 2.4V to 3.3V.
The WF24HTLAJDNN0 2.4-inch TFT display provides a typical brightness of 500 cd/m² and supports an operating temperature range of -20℃ to +70℃, with a storage temperature range of -30℃ to +80℃. With its compact size, 240x320 resolution, and MCU interface, this 2.4-inch TFT LCD module is suitable for smart home systems, medical equipment, portable devices, energy management systems, and telecommunications applications. If landscape mode is required, please contact us for technical support.
| Item | Dimension | Unit |
|---|---|---|
| Size | 2.4 | inch |
| Dot Matrix | 240 × RGB × 320(TFT) | dots |
| Module dimension | 42.72(W) × 60.26(H) × 2.25(D) | mm |
| Active area | 36.72 × 48.96 | mm |
| Dot pitch | 0.051 × 0.153 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 6 o'clock | |
| Gray Scale Inversion Direction | 12 o'clock | |
| Aspect Ratio | Portrait | |
| Controller IC | ILI9341V or Equivalent | |
| Interface | 8-bit/16-bit CPU(build in controller) | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Without Touch Panel | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Analog | VCC | － | 2.4 | 3.3 | V | |
| Supply Voltage For Logic | VCCIO | 1.65 | 3.3 | V | ||
| Supply Current For LCM | ICC | － | － | 5 | 7.5 | mA |
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| LED current | — | — | 80 | — | mA |
| Power Consumption | — | — | 248 | — | mW |
| LED voltage | VBL+ | 2.8 | 3.1 | 3.3 | V |
| LED Life Time | — | 50,000 | — | — | Hr |
| NO | Symbol | Function | I/O |
|---|---|---|---|
| 1 | GND | Ground | P |
| 2-5 | NC | No connect | - |
| 6 | LCD_ID | No connect | - |
| 7 | VCC | power supply(TYP:2.8V). | P |
| 8 | IOVCC | power supply(TYP:1.8V/2.8V). | P |
| 9 | FMARK | Synchronies MCU to frame rate | O |
| 10 | CS | Chip select signal. | I |
| 11 | RS | register select | I |
| 12 | WR | Write data when WRX is Low. | I |
| 13 | RD | Read strobe signal. Read out data when RDX is Low. | I |
| 14-29 | DB0- DB15 | Data bus | I/O |
| 30 | RESET | System reset pin. | I |
| 31 | IM0 | Data interface select IM0= IOVCC 16Bit DB0-DB15 IM0= GND 8Bit DB0-DB7 |
I |
| 32 | NC | No connect | - |
| 33 | GND | Ground | P |
| 34-37 | LEDK1-K4 | Cathode of LED backlight. | P |
| 38 | LEDA | Anode of LED backlight. | P |
| 39 | GND | Ground | P |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.