Home Products TFT LCD Standard TFT Color Display WF18GTLAADNN0

Micro TFT Display, 1.77 inch LCD Display Module

Model No. WF18GTLAADNN0

►1.77 inch
►128x160 TFT LCD
►View Direction: 6H
►Interface: SPI
►IC:ST7735S
►Control-Board : No
►Brightness(cd/m²): 500
►Frame Through Hole: No
►Touch Screen : Without touch screen

Description

WF18GTLAADNN0 is a 1.77-inch TFT display module with a resolution of 128x160 pixels. This micro LCD module is built in with ST7735S IC, supporting serial 3-line/4-line SPI interfaces. It has the module dimension of 34.0 x 45.83 mm and the active area of 28.03 x 35.04 mm. The supply voltage of the display ranges from 2.5V to 3.7V, and the typical value is 2.75V.

WF18GTLAADNN0 is a portrait mode micro TFT display. Users can change it from portrait mode to landscape mode through software settings. The contrast ratio of the module is 500:1 (typical value), and its brightness is 500 nits (typical value). The operating temperatures are from -20℃ to +70℃, and the storage temperatures range from -30℃ to +80℃.

DRAWING

Micro TFT Display, LCD Display Module - WF18GTLAADNN0

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 1.77 inch
Dot Matrix 128 × RGB × 160(TFT) dots
Module dimension 34.0(W) × 45.83(H) × 2.65(D) mm
Active area 28.03 × 35.04 mm
Dot pitch 0.073 × 0.219 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Aspect Ratio Portrait
IC ST7735S or Equivalent
Interface SPI
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For Analog VCI 2.5 2.75 3.7 V
Supply LCM current ICI(mA) 0.9 2 mA

Interface

LCM PIN Definition

Pin Symbol I/O Function
1 LED+ P Back light anode
2 LED- P Back light cathode
3 SPI4W
(VCC=4 WIRE)
I - SPI4W='0', 3-line SPI Enable.
- SPI4W='1', 4-line SPI Enable.
-If Not Used, Please fix this Pin at DGND Level.
4 VCC P Power Supply.
5 GND P Ground
6 CS I Chip enable (CSX)
7 RST I Reset signal (RESX)
8 SDA I/O Serial input/output signal in serial interface mode.
9 SCL I In Serial Interface, this is used as SCL.
10 D/C I Data/ command selection. (D/CX)
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail