5-inch Smart TFT Display with CAN bus, PCAP Touch and GPIO - WL0F00050000FGAAGSA00

5-inch Smart TFT Display with CAN bus, PCAP Touch and GPIO

Model No. WL0F00050000FGAAGSA00

►TFT Size: 5 inch
►TFT Resolution: 800×480 dots
►TFT View Direction: 80/80/80/80 (IPS)
►Communication Interface: CAN bus
►Protocol: CAN open + GPIO
►TFT Touch Panel: Capacitive Touch Panel
►Brightness(cd/m²): 400

PDF DOWNLOAD

DEMO CODE ADD TO INQUIRY

PREV. BACK to LIST NEXT

Description

The WL0F00050000FGAAGSA00 is a 5-inch Smart Display CAN Series TFT module, featuring GPIO support, that operates as a slave device controlled by a master device via CAN bus commands for displaying content and returning touch event data. It integrates WINSTAR’s custom firmware, alongside a standard 5-inch IPS TFT module (model: WF50FTWAGDNG0) and a four-layer PCBA. The user-friendly design allows for quick and cost-effective project development.

Key Features:

Voltage Range: Supports an input voltage range of 5V to 28V, with a typical voltage of 12V.
Self-test Function: Automatically performs self-testing after booting.
CAN Bus Communication Interface: Supports the CANopen protocol, with a default baud rate of 250Kbps.
Storage: Built-in 16MB flash memory for storing fonts and images.
Touch Screen: Supports Projected Capacitive Touch (PCAP) technology.
Built-in Buzzer: Provides sound alerts.
Platform Support: The demo set host supports multiple platforms, including computers (with USB-to-CAN dongle), MCUs, and Raspberry Pi (with PiCAN2).
GPIO Support: Supports 8 bi-directional GPIOs with TTL 3.3V logic levels, and can be configured using the WINSTAR Smart Display GUI Builder.

Software & Development Support:

WINSTAR GUI Builder: No coding required. This Windows-based IDE enables users to design and simulate custom GUIs using a drag-and-drop interface, delivering WYSIWYG (What You See Is What You Get) results and simplifying the development process. (►Link to GUI Builder Introduction ►GUI Builder User Guide)
STMicroelectronics Support: The display is powered by the STM32F series microcontroller and supports ST's development tools, including TouchGFX and STM32CubeIDE, for comprehensive development support.

Whether using the GUI Builder or ST's development tools, the WL0F00050000FGAAGSA00 is a powerful and easy-to-integrate smart display solution, helping customers quickly bring embedded display projects to life.

Try before you buy!

Smart Display products are designed with STMicroelectronics' (ST) controller which supports ST development tools like TouchGFX and STM32CubeIDE. You can also use ST tools to design WINSTAR Smart Display modules besides GUI builder.

TouchGFX: An advanced free-of-charge graphic software framework optimized for STM32 microcontrollers.
STM32CubeIDE: An advanced C/C++ development platform with peripheral configuration, code generation, code compilation, and debug features for STM32 microcontrollers and microprocessors.
STM32CubeMX: A graphical tool that allows a very easy configuration of STM32 microcontrollers, as well as the generation of the corresponding initialization C code for the Arm® Cortex®-M core or a partial Linux® Device Tree for Arm® Cortex®-A core, through a step-by-step process.
STM32CubeProg: An all-in-one multi-OS software tool for programming STM32 products. It provides an easy-to-use and efficient environment for reading, writing and verifying device memory through both the debug interface (JTAG and SWD) and the bootloader interface (UART, USB DFU, I2C, SPI, and CAN).

If you have purchased a WINSTAR Smart Display and wish to develop it by TouchGFX, please contact us through our website to obtain the initial code.

We also provide demo set with all needed accessories for you to realize your GUI design on smart displays.

DRAWING

SPECIFICATIONS

General Specifications

Item	Standard Value	Unit
Operating voltage	5-28	Vdc
Communication Interface	CAN bus	--
MCU	STM32F750	--
Flash Memory	16	MB
LCD display size	5.0	inch
Dot Matrix	800× 3(RGB) × 480	dots
Module dimension	132.7(W) × 75.8(H) × 12.5	mm
Active area	108(W) × 64.8 (H)	mm
Pixel pitch	0.135(W) × 0.135(H)	mm
Brightness	Min:300; Typ:400	cd/m2
LCD Type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80
Aspect Ratio	15:9
Touch Panel	Projected Capacitive Touch Panel (PCAP)
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-30	－	+80	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Item	Symbol	Min	Typ	Max	Unit
Supply Voltage	VCC	5	12	28	V
Supply Current	ICC	670	240	110	mA
I/O pin Voltage	-	-	-	3.3	V

BOM

Item	Description
LCM	WF50FTWAGDNG0#
PCBA	SV10005R000FG00N0103

Interface Pin Function

CN2 definition

Pin	Symbol	Function	Remark
1	VIN	Power supply 5V to 28V input	Input
2	GND	Power supply GND input	Input
3	CAN_H	CAN bus D+	I/O
4	CAN_L	CAN bus D-	I/O
5	GND	Power supply GND input	GND
6	GND	Power supply GND input	GND
7	Reserve	-	-
8	Reserve	-	-
9	VBUS	Power supply 5V input	Input
10	Reserve	-	-
11	Reserve	-	-
12	GND	Power supply GND input	Input
13	VIN	Power supply 5V to 28V input	Input
14	NC	-	-
15	NC	-	-
16	GND	Power supply GND input	Input

CN3 definition

Pin	Symbol	Function	Remark
1	+3V3	3.3V power for JTAG interface	Output
2	SWCLK	CLK pin for JTAG interface	Input
3	GND	GND for JTAG interface	Output
4	SWDIO	Data pin for JTAG interface	I/O
5	NRST	Reset pin for JTAG interface	Input
6	GND	GND	Output
7	WKUP	WKup,ADC,Timer,Event,I/O	TTL signal voltage is 3.3V
8	BOOT0	Lo: Internal flash boot (Default) Hi: External flash boot	TTL signal voltage is 3.3V
9	IO0	ADC,DAC,Timer,Event,I/O	TTL signal voltage is 3.3V
10	IO1	ADC,Timer,Event,I/O	TTL signal voltage is 3.3V
11	IO2	ADC,Timer,Event,I/O	TTL signal voltage is 3.3V
12	IO3	RST,Timer,Event,I/O	TTL signal voltage is 3.3V
13	IO4	RST,Timer,Event,I/O	TTL signal voltage is 3.3V
14	IO5	ADC,Timer,Event,I/O	TTL signal voltage is 3.3V
15	IO6	RST,Timer,Event,I/O	TTL signal voltage is 3.3V
16	IO7	RST,ADC,Event,I/O	TTL signal voltage is 3.3V