Projected Capacitive Touch Panel IPS TFT 5 " with Optical Bonding (MIPI DSI)

Model No. WF50DTYA3MNG10

►Size : 5”
►Resolution : 720x1280 dots
►View Direction : IPS
►Interface : MIPI DSI
►TFT Drive IC : ILI9881C
►Control-Board : No
►Brightness(cd/m²): 250
►Frame Through Hole : No
►Touch Panel : Projected Capacitive Touch Panel
►Detect Point : 10 Fingers


WF50DTYA3MNG10 is a 5 inch IPS TFT display with projected capacitive touch panel optical bonding technology on module. This 5 inch TFT-LCD module supports (Mobile Industry Processor Interface) DSI (Display Serial Interface) interface and is featured with IPS panel which having the advantages of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical) and having HD 720 x1280 resolution. It can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

This 5 inch portrait mode TFT LCD integrated driver IC ILI9881C on module and capacitive touchscreen IC GT928, power supply for analog circuit range from 2.5v to 3.6v. The model is adopting optical bonding solution capacitive touch panel which featuring the advantage of increases the ruggedness of the display and improving durability to having better able to resist scratches, fluids, stains and dirt.


Projected Capacitive Touch Panel IPS TFT 5 with Optical Bonding (MIPI DSI) - WF50DTYA3MNG10



LCM PIN Definition

Pin Symbol Function
1-9 NC No connection 
10-11 VCI Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V
12-13 NC No connection
14 RESET The external reset input
Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
Fix to VDDI level when not in use.
15 TE  Tearing effect output pin.
Leave the pin open when not in use.
16 NC No connection
17-18 GND Power ground
19-20 IOVCC Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V
21 GND Power ground
22 D3P MIPI DSI differential data pair. (Data lane 3)
23 D3N
24 GND Power ground
25 D2P MIPI DSI differential data pair. (Data lane 2)
26 D2N
27 GND Power ground
28 CLKP MIPI DSI differential clock pair
30 GND Power ground
31 D1P MIPI DSI differential data pair. (Data lane 1)
32 D1N
33 GND Power ground
34 D0P MIPI DSI differential data pair. (Data lane 0)
35 D0N
36-37 GND Power ground
38 LED+ Power for LED backlight anode
39 LED1- Power for LED1 backlight cathode
40 LED2- Power for LED2 backlight cathode

PCAP PIN Definition

Pin Symbol Function
1 SDA I2C data input and output
2 SCL I2C clock input
3 RST External Reset, Low is active
4 INT External interrupt to the host
5 VDD Power Supply : +3.3V
6 GND Ground for analog circuit

General Specifications

Item Dimension Unit
Size 5.0 inch
Dot Matrix 720 × 3(RGB) ×1280 dots
Module dimension 73.3 (W) × 127.6 (H) ×3.45 mm
Active area 62.1 (W) × 110.4 (H) mm
Dot pitch 0.08625(W) × 0.08625(H) mm
LCD type TFT, Normally Black, Transmissive
Viewing angle 80/80/80/80
Aspect Ratio 16:9
Backlight Type LED, Normally White
TFT Drive IC ILI9881C or Equivalent
TFT Interface MIPI
PCAP FW Version 0x5F
Touch Panel Projected capacitive touch panel (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Typical Operation Conditions

Item Symbol Values Unit
Min Typ Max
Power supply for analog circuit VCI 2.5 3.3 3.6 V
Power supply for logic circuit IOVCC 1.65 1.8 3.6 V
Supply Voltage For Touch Logic VDDT 2.8 - 3.3 V
Current for Driver IDD - 44 - mA

Backlight Driving Conditions

Parameter Symbol Min. Typ. Max. Unit
LED current ILED - 40 - mA
LED voltage VLED+ 19.6 - 23.8 V
LED Life Time   30,000 - - Hr

Search keyword: tft 5, tft 5", 5 tft lcd, 5" tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5" tft display, 5 inch tft display, tft display 5, tft display 5", 5.0 tft lcd,5"tft
go top