5 inç MIPI DSI IPS TFT LCD Ekran
Model No. WF50DTYA3MNG10
►Boyut : 5 inç
►Çözünürlük : 720x1280 dot
►Görünüm yönü : IPS
►Ara yüz : MIPI DSI
►Sürücü Entegresi:ILI9881C
►Kontrol Kartı : Hayır
►Parlaklık(cd/m²): 250
►Delikli Çerçeve: Hayır
►Dokunmatik Ekran: Kapasitif dokunmatik panelle birlikte, PCAP,OCA
►Detect Point : 10 Fingers
Açıklama
WF50DTYA3MNG10, 5 inç IPS TFT ekranı ile son teknolojiye sahip bir üründür ve modül üzerinde optik bağlama teknolojisi ile kapasitif dokunmatik panel teknolojisine sahiptir. Bu 5 inç TFT-LCD modülü, Mobil Endüstri İşlemci Arayüzü (Mobile Industry Processor Interface - MIPI (Mobile Industry Processor Interface) DSI (Display Serial Interface) arabirimini desteklemekte olup, geniş görüş açısına sahip IPS paneli ile öne çıkmaktadır (Sol: 80 / Sağ: 80 / Yukarı: 80 / Aşağı: 80 derece - tipik) ve HD 720 x 1280 çözünürlüğe sahiptir.
Ürün, -20℃ ile +70℃ arasındaki sıcaklıklarda sorunsuz çalışabilir ve -30℃ ile +80℃ arasındaki depolama sıcaklıklarını destekler.
5 inç dikey mod TFT LCD entegre sürücü IC ILI9881C ve kapasitif dokunmatik ekran IC GT928'yi içermektedir. Analog devre için güç kaynağı, 2.5V ile 3.6V arasında değişebilen, tipik değeri 3.3V olan esnek bir aralığa sahiptir. Model, çizilmelere, sıvılara, lekelere ve kire daha iyi dayanabilen, ekranın dayanıklılığını artıran bir optik bağlama çözümü kapasitif dokunmatik paneli benimsemektedir.
ÇIZIM
AYRINTILAR
Arayüz Pin Fonksiyonlari
LCM PIN Definition
Pin | Sembol | Fonksiyon |
---|---|---|
1-9 | NC | No connection |
10-11 | VCI | Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V |
12-13 | NC | No connection |
14 | RESET | The external reset input Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power. Fix to VDDI level when not in use. |
15 | TE | Tearing effect output pin. Leave the pin open when not in use. |
16 | NC | No connection |
17-18 | GND | Power ground |
19-20 | IOVCC | Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V |
21 | GND | Power ground |
22 | D3P | MIPI DSI differential data pair. (Data lane 3) |
23 | D3N | |
24 | GND | Power ground |
25 | D2P | MIPI DSI differential data pair. (Data lane 2) |
26 | D2N | |
27 | GND | Power ground |
28 | CLKP | MIPI DSI differential clock pair |
29 | CLKN | |
30 | GND | Power ground |
31 | D1P | MIPI DSI differential data pair. (Data lane 1) |
32 | D1N | |
33 | GND | Power ground |
34 | D0P | MIPI DSI differential data pair. (Data lane 0) |
35 | D0N | |
36-37 | GND | Power ground |
38 | LED+ | Power for LED backlight anode |
39 | LED1- | Power for LED1 backlight cathode |
40 | LED2- | Power for LED2 backlight cathode |
PCAP PIN Definition
Pin | Sembol | Fonksiyon |
---|---|---|
1 | SDA | I2C data input and output |
2 | SCL | I2C clock input |
3 | RST | External Reset, Low is active |
4 | INT | External interrupt to the host |
5 | VDD | Power Supply : +3.3V |
6 | GND | Ground for analog circuit |
Genel Özellikler
Kalem | Ölçü | Birim |
---|---|---|
Boyut (Köşegen) | 5.0 | inç |
Nokta Matrisi (Çözünürlük) | 720 × 3(RGB) ×1280 | dot |
Modül ölçüleri | 73.3 (W) × 127.6 (H) ×3.45 | mm |
Aktif alan | 62.1 (W) × 110.4 (H) | mm |
Nokta sıklığı | 0.08625(W) × 0.08625(H) | mm |
LCD Tipi | TFT, Siyah, İletici | |
Görünüm yönü | 80/80/80/80 | |
Görünüm Oranı | 16:9 | |
Backlight Tipi | LED, Beyaz | |
TFT Sürücü Entegresi | ILI9881C veya eşdeğer | |
TFT Arayüz | MIPI | |
PCAP FW Versiyonu | 0x5F | |
PCAP IC | GT928 | |
Dokunmatik Panel | Kapasitif Dokunmatik Panel (PCAP) | |
Yüzey | Parlama |
Maksimum Değerler
Kalem | Sembol | Minumum Deger | Tipik Deger | Maksimum Deger | Birim |
---|---|---|---|---|---|
Çalışma Sıcaklığı | TOP | -20 | - | +70 | ℃ |
Saklama Sıcaklığı | TST | -30 | - | +80 | ℃ |
Elektronik Özellikleri
Typical Operation Conditions
Kalem | Sembol | Standart Deger | Birim | ||
---|---|---|---|---|---|
Minumum Deger | Tipik Deger | Maksimum Deger | |||
Power supply for analog circuit | VCI | 2.5 | 3.3 | 3.6 | V |
Power supply for logic circuit | IOVCC | 1.65 | 1.8 | 3.6 | V |
Supply Voltage For Touch Logic | VDDT | 2.8 | - | 3.3 | V |
Current for Driver | IDD | - | 44 | - | mA |
Backlight Driving Conditions
Parameter | Sembol | Minumum Deger | Tipik Deger | Maksimum Deger | Birim |
---|---|---|---|---|---|
LED current | ILED | - | 40 | - | mA |
LED voltage | VLED+ | 19.6 | - | 23.8 | V |
LED Life Time | 30,000 | - | - | Hr |