Home Products TFT LCD IPS TFT LCD WF50DTYA3MNN0

5" MIPI LCD Display, MIPI DSI Interface LCD Panel - IPS

Model No. WF50DTYA3MNN0

►MIPI LCD Display
►Size : 5 inch
►Resolution : 720×1280 dots
►View Direction : IPS
►MIPI DSI Interface
►TFT Drive IC : ILI9881C
►Control-Board : No
►Brightness (cd/m²): 300
►Frame Through Hole : No
►Touch Screen : Without touch screen

DESCRIPTION

WF50DTYA3MNN0 is a 5 inch IPS TFT-LCD display module, resolution 720 x1280 pixels. This 5 inch TFT-LCD module supports MIPI DSI interface and is featured with IPS panel which having the advantages of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical) and having HD resolution, contrast ratio 800 (typical value). It can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

This 5 inch MIPI LCD Display Panel is having module dimension of 66.10 x 120.4 mm and AA size of 62.1 x 110.4 mm; it integrated driver IC ILI9881C on module, power supply for analog range 2.5v to 3.6v. This TFT module is portrait mode, if you would like to use landscape mode please contact with us for more technical support.

DRAWING

Winstar 5 MIPI LCD Display, MIPI Interface LCD Panel (Wide Temperature) - WF50DTYA3MNN0

SPECIFICATIONS

Interface

LCM PIN Definition

Pin Symbol Function
1 NC/TP_GND No connection
2 NC/TP_SDA No connection
3 NC/TP_SCL No connection
4 NC/TP_INT No connection
5 NC/TP_RST No connection
6 NC/YU No connection
7 NC/XL No connection
8 NC/YD No connection
9 NC/XR No connection
10-11 VCI Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V
12-13 NC No connection
14 RESET The external reset input
Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
Fix to VDDI level when not in use.
15 TE  Tearing effect output pin.
Leave the pin open when not in use.
16 NC No connection
17-18 GND Power ground
19-20 IOVCC Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V
21 GND Power ground
22 D3P MIPI DSI differential data pair. (Data lane 3)
23 D3N
24 GND Power ground
25 D2P MIPI DSI differential data pair. (Data lane 2)
26 D2N
27 GND Power ground
28 CLKP MIPI DSI differential clock pair
29 CLKN
30 GND Power ground
31 D1P MIPI DSI differential data pair. (Data lane 1)
32 D1N
33 GND Power ground
34 D0P MIPI DSI differential data pair. (Data lane 0)
35 D0N
36-37 GND Power ground
38 LED+ Power for LED backlight anode
39 LED1- Power for LED1 backlight cathode
40 LED2- Power for LED2 backlight cathode

General Specifications

Item Dimension Unit
Size 5.0 inch
Dot Matrix 720× 3(RGB) ×1280 dots
Module dimension 66.10 (W) × 120.4 (H) ×1.85 mm
Active area 62.1 (W) × 110.4 (H) mm
Dot pitch 0.08625(W) ×0.08625(H) mm
LCD type TFT, Normally Black, Transmissive
Viewing angle 80/80/80/80
Aspect Ratio 16:9
TFT Drive IC ILI9881C  or Equivalent
TFT Interface MIPI
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

1. Typical Operation Conditions

Item Symbol Values Unit
Min. Typ. Max.
Power supply for analog circuit VCI 2.5 3.3 3.6 V
Power supply for logic circuit IOVCC 1.65 1.8 3.6 V
Current for Driver IDD - 44   mA

2. Backlight Driving Conditions

Parameter Symbol Min. Typ. Max. Unit
LED current ILED - 40 - mA
LED voltage VLED+ 19.6 - 23.8 V
LED Life Time   30,000 - - Hr

Search keyword: tft 5, tft 5", 5 tft lcd, 5" tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5" tft display, 5 inch tft display, tft display 5, tft display 5"
go top
close