Model No. WL0F00050000FGAAASA00
►TFT Size: 5"
►TFT Resolution: 800×480 dots
►TFT View Direction: 80/80/80/80 (IPS)
►Communication Interface: CAN bus
►Protocol: CANopen
►TFT Touch Screen: Capacitive Touch Panel
►Brightness(cd/m²): 400
WL0F00050000FGAAASA00 is a 5” Smart Display_CAN series TFT which is defined as a slave device, that is controlled by master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects. WL0F00050000FGAAASA00 is integrated with an standard TFT module WF50FTWAGDNG0 and a 4-layers FR4 PCBA with built-in firmware. This 5” Smart Display _CAN series TFT is an easy-to-use product which allows you to develop projects rapidly in cost-effective way. Below are the features of WL0F00050000FGAAASA00. Our Smart Display can be used on multiple host (HOST) platforms. such as Computer (with USB2CAN Dongle) , MCU, Raspberry Pi (with PiCAN2).
Smart Display products are designed with STMicroelectronics' (ST) controller which supports ST development tools like TouchGFX and STM32CubeIDE. You can also use ST tools to design WINSTAR Smart Display modules besides GUI builder.
5 Inch Smart Display Feature:
Try before you buy! Contact us to download WINSTAR GUI Builder application.
We also provide demo set with all needed accessories for you to realize your GUI design on smart displays.
| Item | Standard Value | Unit |
|---|---|---|
| Operating voltage | 5 | Vdc |
| Communication Interface | CAN bus differential ± 3.3 | Vpp |
| MCU | STM32F429 | N/A |
| Flash Memory | 16 | MB |
| SDRAM Frequency | 90 | MHz |
| LCD display size | 5 | inch |
| Dot Matrix | 800 × 3(RGB) × 480 | dot |
| Module dimension | 132.7(W) × 75.8(H) ×12.00 | mm |
| Active area | 108(W) × 64.8 (H) | mm |
| Dot pitch | 0.135(W) ×0.135(H) | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 80/80/80/80 | |
| Aspect Ratio | 5:3 | |
| Touch Panel | With Projected Capacitive Touch Panel (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.75 | 5 | 5.25 | V |
| Supply Current | ICC | 410 | mA |
| Item | Description |
|---|---|
| LCM | WF50FTWAGDNG0# |
| PCBA | SV10005R000FA00N0109 |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | +5V | Power supply 5V input | Input |
| 2 | GND | Power supply GND input | Input |
| 3 | CAN_High | CAN bus D+ | I/O |
| 4 | CAN_Low | CAN bus D- | I/O |
| 5 | VDD_5V | 5V output for USART interface | Output |
| 6 | USART1_RX | USART RX interface(Reserve) | Reserve |
| 7 | USART1_TX | USART TX interface(Reserve) | Reserve |
| 8 | GND | GND for USART interface | Output |
| 9-16 | NC | -- | - |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | VMCU | 3.3V power for JTAG interface | Output |
| 2 | JTAG_SWCLK | CLK pin for JTAG interface | Input |
| 3 | GND | GND for JTAG interface | Output |
| 4 | JTAG_SWDIO | Data pin for JTAG interface | I/O |
| 5 | NRST | Reset pin for JTAG interface | Input |
| 6 | GND | GND | Output |
| 7-16 | NC | -- | - |
Smart Display can be used to display the coordinate, status and data information provided by the connected HOST device. Customers can configure the position coordinates they want to display in normal operation mode.
The Display is designed to be easily connected to a controller network, and to operate with minimum setup or knowledge of the SDO configuration on the controllers.
The default splash image is shown below.
This product is produced as a generic product. If you require a custom splash image for your application, contact us to discuss.
The Smart Display can acquire the data that it displays either using the CANopen SDO protocol, or using the CANopen PDO protocol.
On Pre-operational mode, customers can set the coordinates of objects through SDO; On operational mode, customers can send data of objects through PDO.
Winstar Smart Display CAN series offers an out-of-the-box CANopen development experience that will lower customers' development costs and speed time-to-market expectations.
The Smart Display can use wide-temperature are designed to support control applications in harsh operating conditions, which designed to be connected to a variety of different situation combinations, such as automotive, marine, power generation and oil-and-gas.
The Smart Display comes with standard UI objects to get customers project off the ground quickly. If customers need custom UI objects support, our engineers are here to help. Send over your contents in PNG/JPG format, we will send over a new set of UI objects within 3~5 working days.
The Smart Display is defined as a slave device, which is controlled by master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects.
The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a industry application situation.
The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a vehicle automotive situation.
The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a Medical application situation.
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.