Model No. WL0F00050000FGAAESA00
►TFT Size: 5 inch
►TFT Resolution: 800×480 dots
►TFT View Direction: 80/80/80/80 (IPS)
►Communication Interface: CAN bus
►Protocol: Custom CAN ID + GPIO
►TFT Touch Panel: Capacitive Touch Panel
►Brightness(cd/m²): 400
WL0F00050000FGAAESA00 is a 5 inch Smart Display CAN series TFT which is defined as a slave device, that is controlled by master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects. WL0F00050000FGAAESA00 is integrated with an standard TFT module WF50FTWAGDNG0 and a 4-layers FR4 PCBA with built-in firmware. This 5 inch Smart Display CAN series TFT is an easy-to-use product which allows you to develop projects rapidly in cost-effective way. Below are the features of WL0F00050000FGAAESA00. Our Smart Display can be used on multiple host (HOST) platforms. such as Computer (with USB2CAN Dongle) , MCU, Raspberry Pi (with PiCAN2).
Smart Display products are designed with STMicroelectronics' (ST) controller which supports ST development tools like TouchGFX and STM32CubeIDE. You can also use ST tools to design WINSTAR Smart Display modules besides GUI builder.
5 Inch Smart Display Feature:
Try before you buy! Contact us to download WINSTAR GUI Builder application.
We also provide demo set with all needed accessories for you to realize your GUI design on smart displays.
| Item | Standard Value | Unit |
|---|---|---|
| Operating voltage | 12 | Vdc |
| Communication Interface | CAN bus | -- |
| MCU | STM32F750 | N/A |
| Flash Memory | 16 | MB |
| LCD display size | 5.0 | inch |
| Dot Matrix | 800 × 3(RGB) × 480 | dot |
| Module dimension | 132.7(W) ×75.8(H) ×12.5 | mm |
| Active area | 108(W) × 64.8 (H) | mm |
| Dot pitch | 0.135(W) × 0.135(H) | mm |
| Brightness | Min: 300; Typ: 400 | cd/m2 |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 80/80/80/80 (IPS) | |
| Aspect Ratio | 15:9 | |
| Touch Panel | Projected Capacitive Touch Panel (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VCC | 5 | 12 | 28 | V |
| Supply Current | ICC | 610 | 240 | 110 | mA |
| I/O pin Voltage | -- | -- | -- | 3.3 | V |
| Item | Description |
|---|---|
| LCM | WF50FTWAGDNG0# |
| PCBA | SV10005R000FG00N0100 |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | VIN | Power supply 5V to 28V input | Input |
| 2 | GND | Power supply GND input | Input |
| 3 | CAN_H | CAN bus D+ | I/O |
| 4 | CAN_L | CAN bus D- | I/O |
| 5 | GND | Power supply GND input | GND |
| 6 | GND | Power supply GND input | GND |
| 7 | Reserve | - | - |
| 8 | Reserve | - | - |
| 9 | VBUS | Power supply 5V input | Input |
| 10 | Reserve | - | - |
| 11 | Reserve | - | - |
| 12 | GND | Power supply GND input | Input |
| 13 | VIN | Power supply 5V to 28V input | Input |
| 14 | Reserve | - | - |
| 15 | Reserve | - | - |
| 16 | GND | Power supply GND input | Input |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | +3V3 | 3.3V power for JTAG interface | Output |
| 2 | JTAG_SWCLK | CLK pin for JTAG interface | Input |
| 3 | GND | GND for JTAG interface | Output |
| 4 | JTAG_SWDIO | Data pin for JTAG interface | I/O |
| 5 | NRST | Reset pin for JTAG interface | Input |
| 6 | GND | GND | Output |
| 7 | WKUP | WKup,ADC,Timer,Event,I/O | TTL signal voltage is 3.3V |
| 8 | BOOT0 | Lo: Internal flash boot (Default) Hi: External flash boot |
TTL signal voltage is 3.3V |
| 9 | IO0 | ADC,DAC,Timer,Event,I/O | TTL signal voltage is 3.3V |
| 10 | IO1 | ADC,Timer,Event,I/O | TTL signal voltage is 3.3V |
| 11 | IO2 | ADC,Timer,Event,I/O | TTL signal voltage is 3.3V |
| 12 | IO3 | RST,Timer,Event,I/O | TTL signal voltage is 3.3V |
| 13 | IO4 | RST,Timer,Event,I/O | TTL signal voltage is 3.3V |
| 14 | IO5 | ADC,Timer,Event,I/O | TTL signal voltage is 3.3V |
| 15 | IO6 | RST,Timer,Event,I/O | TTL signal voltage is 3.3V |
| 16 | IO7 | RST,ADC,Event,I/O | TTL signal voltage is 3.3V |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.