Home Products TFT Display TFT Panel + Controller Board WF50FSYBGDST0

5-inch 800x480 TFT IPS LCD Module with Resistive Touch & BT815Q Control Board

Model No. WF50FSYBGDST0

►Size: 5 inch
►Resolution : 800×480 dots
►View Direction : IPS
►Interface : SPI/QSPI
►Controller IC : BT816Q
►Control-Board : Yes
►Brightness(cd/m²) : 650
►Frame Through Hole : Yes
►Touch Screen : Resistive Touch Panel (RTP)
►Operating Temperature : -20~+70°C

Description

WF50FSYBGDST0 is a 5-inch high-brightness IPS TFT-LCD display module with a resistive touch panel (RTP) and a resolution of 800x480 pixels. This module is equipped with the BT816Q controller IC and includes a built-in controller board. It supports both SPI and QSPI interfaces. The QSPI interface can achieve a data rate four times faster than the standard SPI interface, providing smoother display performance. The BT815/6 series of controllers, integrated with EVE (Embedded Video Engine) technology, simplifies the system architecture. EVE technology is a revolutionary concept that uses an object-oriented approach to create high-quality human-machine interfaces (HMIs). This technology supports display, audio, and touch, enabling engineers to quickly and efficiently design HMIs and provides a powerful solution for high-resolution displays while reducing material costs.

WF50FSYBGDST0 adopts an IPS panel, offering the advantage of a wider viewing angle: Left: 80° / Right: 80° / Up: 80° / Down: 80° (typical). It has a contrast ratio of 1000:1 (typical) and a brightness of 650 nits (typical). The anti-glare panel has a 5:3 aspect ratio. The WF50F SPI series also offers a projected capacitive touch panel (PCAP) option. For more detailed information, please refer to the webpage for WF50FSYBGDSGA.

The WF50FSYBGDST0 operates with a 3.3V control signal and comes with a built-in 32MB Flash storage device, without a MicroSD slot. If customers require a 5V control signal for compatibility with Arduino boards, please do not hesitate to contact us. The WF50F model operates at temperatures from -20°C to +70°C and has a storage temperature range from -30°C to +80°C.

DRAWING

5-inch 800x480 TFT IPS LCD Module with Resistive Touch & BT815Q Control Board - WF50FSYBGDST0

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 5 inch
Dot Matrix 800 × 3(RGB) × 480 dots
Module dimension 138.7 (W) × 75.8 (H) × 12.8(D)(MAX) mm
Active area 108 × 64.8 mm
Pixel pitch 0.135(W) × 0.135(H) mm
LCD type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80
Aspect Ratio 5:3
Backlight Type LED, Normally White
TFT Controller IC BT816Q
TFT Interface SPI/QSPI
Touch Panel Resistive Touch Panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For VDD VDD 3.1 3.3 3.5 V
Supply Current For VDD IDD VDD=3.3V 96 144 mA
Supply Voltage For VLED VLED 4.5 5 5.5 V
Supply Current For VLED ILED VLED=+5V 334 500 mA

Interface

LCM PIN Definition (CON5)

Pin Symbol I/O Function
1 VDD P 3.3V power supply input
2 GND P Ground
3 SCK I SPI clock input
4 MISO O SPI Single mode: SPI MISO output
SPI Dual/Quad mode: SPI data line 1
5 MOSI I SPI Single mode: SPI MOSI input
SPI Dual/Quad mode: SPI data line 0
6 CS I SPI slave select input
7 INT OD/O Interrupt to host, open drain output(default) or push-pull output, active low
8 PD_N I Chip power down mode control input, active low. Connect to MCU GPIO for power management or hardware reset function
9 GPIO2 I/O General purpose IO 2
10 GPIO3 I/O General purpose IO 3
11 IO2 I/O SPI Single/Dual mode: General purpose IO 0
SPI Quad mode: SPI data line 2
12 IO3 I/O SPI Single/Dual mode: General purpose IO 1
SPI Quad mode: SPI data line 3
13 NC - No connection
14 NC - No connection
15 NC - No connection
16 NC - No connection
17 VLED P 5V power supply input
18 VLED P 5V power supply input
19 GND P Ground
20 GND P Ground
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail