Model No. WL0F0007000A8GAAASA00
►TFT Size: 7"
►TFT Resolution: 1024×600 dots
►TFT View Direction: 85/85/85/85 (IPS)
►Communication Interface: CAN bus
►Protocol: CANopen
►TFT Touch Screen: Capacitive Touch Panel
►Brightness(cd/m²): 450
WL0F0007000A8GAAASA00 is a 7" Smart Display_CAN series TFT which is defined as a slave device, that is controlled by master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects. WL0F0007000A8GAAASA00 is integrated with a standard TFT module WF70A8TYAHLNGB and 4-layers PCBA with built-in firmware. This 7" Smart Display _CAN series TFT is an easy-to-use product which allows customers to develop projects rapidly in cost-effective way. This 7” Smart Display can use computer with USB2CAN dongle or Raspberry Pi interface (PiCAN2) as HOST platform.
Smart Display products are designed with STMicroelectronics' (ST) controller which supports ST development tools like TouchGFX and STM32CubeIDE. You can also use ST tools to design WINSTAR Smart Display modules besides GUI builder.
Below are the features of 7" smart display:
Try before you buy! Contact us to download WINSTAR GUI Builder application.
We also provide demo set with all needed accessories for you to realize your GUI design on smart displays.
| Item | Description |
|---|---|
| LCM | WF70A8TYAHLNGB# |
| PCBA | SV10007R00AAA00N0100 |
| Item | Standard Value | Unit |
|---|---|---|
| Operating voltage | 5~16V | Vdc |
| Communication Interface | CAN bus differential ± 3.3 | N/A |
| MCU | STM32F746 216MHz | N/A |
| Flash Memory | 16 | MB |
| SDRAM Frequency | 108 | MHz |
| LCD display size | 7.0 | inch |
| Dot Matrix | 1024 x RGB x 600(TFT) | dot |
| Module dimension | 184.1(W) x 103.8(H) x 22(D) | mm |
| Active area | 154.2144 x 85.92 | mm |
| Dot pitch | 0.1506 x 0.1432 | mm |
| Brightness | Min:400; Typ:450 | cd/m2 |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 85/85/85/85 | |
| Aspect Ratio | 16:9 | |
| Touch Panel | Capacitive Touch Panel | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VIN | － | 5 | 12 | 16 | V |
| Supply current | I(mA) | － | － | 490 | － | mA |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | VIN | Power supply V+ | Input |
| 2 | GND | Power supply GND input | Input |
| 3 | CAN_H | CAN bus D+ | I/O |
| 4 | CAN_L | CAN bus D- | I/O |
| 5 | GND | Power supply GND input | Input |
| 6 | GND | Power supply GND input | Input |
| 7 | NC | _ | _ |
| 8 | NC | _ | _ |
| 9 | Reserve | _ | _ |
| 10 | Reserve | UART RX interface(Reserve) | Reserve |
| 11 | Reserve | UART TX interface(Reserve) | Reserve |
| 12 | GND | GND | GND |
| 13 | Reserve | _ | _ |
| 14 | NC | _ | _ |
| 15 | NC | _ | _ |
| 16 | GND | GND | GND |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | +3V3 | 3.3V power for JTAG interface | Output |
| 2 | SWCLK | CLK pin for JTAG interface | Input |
| 3 | GND | GND for JTAG interface | Output |
| 4 | SWDIO | Data pin for JTAG interface | I/O |
| 5 | NRST | Reset pin for JTAG interface | Input |
| 6 | GND | GND | Output |
| 7~16 | NC | _ | _ |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.