Home Products TFT LCD IPS TFT LCD WF57A5TYAFDNT0

5.7 inch 640x480 IPS TFT LCD with Resistive Touch Panel

Model No. WF57A5TYAFDNT0

►Size : 5.7 inch
►Resolution : 640x480 dots
►View Direction : 80/80/80/80 (IPS)
►Interface : RGB18bits SYNC+DE mode
►Driver IC:JD9168S
►Control-Board : No
►Brightness(cd/m2) : 350
►Frame Through Hole : No
►Touch Screen : Resistive Touch Panel

Description

WF57A5TYAFDNT0 is a 5.7-inch resistive touch screen TFT module. It has a resolution of 640x480 pixels, with an aspect ratio of 4:3, a brightness of 350 nits (typical value), and a contrast ratio of 1,200:1.

This TFT module adopts IPS display technology, providing a wider viewing angle (left: 80 / right: 80 / up: 80 / down: 80 degrees). The overall dimensions of the display are 124.7 x 100 mm, with an active area size of 115.2 x 86.4 mm. This module utilizes the JD9168S driver IC and supports RGB 18-bit SYNC+DE mode interface.

The TFT panel features an anti-glare surface, which effectively reduces light reflection, enhances visibility in bright environments, and minimizes or eliminates glare from light sources. This can reduce eye fatigue and improve display performance, ensuring clear visibility of content.

The operating temperature range of WF57A5TYAFDNT0 is -20°C to +70°C, with a storage temperature range of -30°C to +80°C. The power supply voltage ranges from 3.0V to 3.6V, with a typical value of 3.3V. This model module is an ideal choice for industrial control displays, medical equipment displays, detection equipment displays, smart home devices, and more.

5.7 inch 640x480 IPS TFT LCD with Resistive Touch Panel - WF57A5TYAFDNT0

DRAWING

5.7 inch 640x480 IPS TFT LCD with Resistive Touch Panel - WF57A5TYAFDNT0

SPECIFICATIONS

Interface Pin Function

LCM PIN Definition

Pin Symbol I/O Function
1 GND P Ground.
2 VCC P Power supply for TFT
3 VCC P Power supply for TFT
4 GND P Ground.
5 NC - No connection
6 GND P Ground.
7 NC - No connection
8 GND P Ground.
9 UD I Up/down selection
10 LR I Left /right selection
11 /CSX I Chip select pin. 0: Chip can be accessed; 1: Chip cannot be accessed.
If this pin is not used, please connect it to VCC.
12 SCL I Serial clock input in SPI interface .If not use, let it open or VCC or GND.
13 SDA I Serial data input / output pin in SPI interface operation. If not use, let it open.
14 NC - No connection
15 GND P Ground.
16 B5 I Blue Data bus
17 B4 I Blue Data bus
18 B3 I Blue Data bus
19 B2 I Blue Data bus
20 B1 I Blue Data bus
21 B0 I Blue Data bus
22 NC - No connection
23 NC - No connection
24 GND P Ground.
25 G5 I Green Data bit
26 G4 I Green Data bit
27 G3 I Green Data bit
28 G2 I Green Data bit
29 G1 I Green Data bit
30 G0 I Green Data bit
31 NC - No connection
32 NC - No connection
33 GND P Ground.
34 NC - No connection
35 NC - No connection
36 GND P Ground.
37 R5 I Red Data bit
38 R4 I Red Data bit
39 R3 I Red Data bit
40 R2 I Red Data bit
41 R1 I Red Data bit
42 R0 I Red Data bit
43 VLED- P Power supply for LED cathode
44 VLED+ P Power supply for LED anode
45 DE I Data enable input in RGB interface.
46 CLK I Pixel clock input in RGB interface.
47 HS I Horizontal sync input in RGB interface.
48 VS I Vertical sync input in RGB interface
49 NC - No connection
50 GND P Ground.

General Specifications

Item Dimension Unit
Size 5.7 inch
Dot Matrix 640 x RGB x 480(TFT) dots
Module dimension 124.7 x 100 x 7.41 mm
Active area 115.2 x 86.4 mm
Pixel pitch 0.18 x 0.18 mm
LCD type TFT, Normally Black ,Transmissive
View Angle 80/80/80/80
TFT Driver IC JD9168S or Equivalent
TFT Interface RGB 18 bits SYNC+DE mode
Aspect Ratio 4:3
Backlight Type LED, Normally White
Touch Panel Resistive Touch Panel (RTP)
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Parameter Symbol Condition Min Typ Max Unit
Supply Voltage VCC Ta=25⁰C 3.0 3.3 3.6 V
Input voltage H VIH VCC=3.0V 0.7VCC - VCC  
L VIL VCC=3.0V 0 - 0.3VCC mW
Power supply Current Operating) ICC VCC=3.0V 50 75 mA

LED driving conditions

Parameter Symbol Min Typ Max Unit
LED current 80 mA
Power Consumption 1334 1440 1536 mW
LED voltage VLED+ 16.8 18.0 19.2 V
LED Life Time 50,000 Hr


Search keyword: tft 5.7, tft 5.7", 5.7 tft lcd, 5.7" tft lcd, 5.7 inch tft lcd, tft lcd 5.7, 5.7 tft display, 5.7" tft display, 5.7 inch tft display, tft display 5.7, tft display 5.7"
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail