Model No. WF0096ATYAA3DNNA
►Size: 0.96 inch
►Resolution : 80x160 pixels
►View Direction: IPS
►Interface: SPI
►Driver IC：ST7735S
►Control-Board : No
►Brightness(cd/m²): 500
►Frame Through Hole: No
►Touch Screen : Without touch screen
WF0096ATYAA3DNNA is a 0.96-inch IPS TFT LCD display with an 80x160 resolution. It features a 13-pin FPC designed for connector connection, an ST7735S controller IC, and an SPI interface. The module operates with a supply voltage (VCC) from 3.0V to 3.6V and provides a typical brightness of 500 cd/m².
WF0096ATYAA3DNNA shares the same display specifications as WF0096ATYAA3DNN0, with the main difference being the FPC connection method. WF0096ATYAA3DNNA is designed for connector connection, while WF0096ATYAA3DNN0 uses a soldered FPC connection, providing different connection options for system integration.
The normally black, transmissive IPS panel provides wide viewing angles of 80/80/80/80 degrees (typical) and a 1:2 aspect ratio. The module measures 13.5 x 27.95 x 1.54 mm, with an active area of 10.8 x 21.696 mm. It is supplied without a touch panel and operates from -20°C to +70°C, with a storage temperature range of -30°C to +80°C.
| Item | Dimension | Unit |
|---|---|---|
| Size | 0.96 | inch |
| Dot Matrix | 80 × RGB × 160(TFT) | dots |
| Module dimension | 13.5(W) × 27.95(H) × 1.54(D) | mm |
| Active area | 10.8 × 21.696 | mm |
| Dot pitch | 0.135 × 0.1356 | mm |
| LCD type | TFT, Normally black, Transmissive | |
| Viewing Angle | 80/80/80/80 (IPS) | |
| Aspect Ratio | 1:2 | |
| IC | ST7735S | |
| Interface | SPI | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Without Touch Panel | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VCC | 3.0 | 3.3 | 3.6 | V |
| Supply LCM current | ICC | － | － | 2 | mA |
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| LED current | ILED | － | 20 | － | mA |
| LED voltage | VLED | 2.8 | 3.0 | 3.2 | V |
| LED Life Time | 50000 | － | － | Hr |
| Pin | Symbol | Function |
|---|---|---|
| 1 | SPI4W | SPI4W='0' , 3-wire SPI. SPI4W='1' , 4-wire SPI. |
| 2 | NC | No connection |
| 3 | SDA | Serial interface data |
| 4 | SCL | Serial interface clock |
| 5 | RS | Data/command selection pin (4-wire SPI use) |
| 6 | RES | Reset pin (low active) |
| 7 | CS | Chip selection pin (low active) |
| 8 | GND | Ground |
| 9 | NC | No connection |
| 10 | VCC | Power supply |
| 11 | LEDK | Back light cathode |
| 12 | LEDA | Back light anode |
| 13 | GND | Ground |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
