Model No. WEA012864L(SPI)
►Type: Graphic
►Structure: COG+PCB
►Size: 1.28"
►128 x 64 Dot Matrix
►IC：SH1106
►3V/5V Power supply
►1/64 duty
►Interface: 4-Wire SPI
►Display Color: White / Yellow / Sky Blue
WEA012864L (SPI) is a graphic COG OLED module with a diagonal size of 1.28 inches. It features a PCB and a resolution of 128x64 pixels.
This module is built-in with the SH1106 IC; it supports 4-Wire SPI interfaces with 1/64 driving duty. This OLED display has a PCB with screw holes and a peripheral circuit for easy mounting and usage. It can operate at temperatures from -40°C to +80°C; its storage temperatures range from -40°C to +85°C. The available emitting colors of the module are white and yellow.
This OLED module also has I2C interface-supported option; please check Model WEA012864L(I2C) for more details.
Data source ref: WEA012864LWPP3N00F00
| Item | Dimension | Unit |
|---|---|---|
| Dot Matrix | 128 × 64 Dots | － |
| Module dimension | 35.50 × 32.00 × 5.46 Max. | mm |
| Active Area | 29.42 × 14.20 | mm |
| Pixel Size | 0.205 × 0.197 | mm |
| Pixel Pitch | 0.230 × 0.222 | mm |
| Display Mode | Passive Matrix | |
| Display Color | Monochrome | |
| Drive Duty | 1/64 Duty | |
| Controller IC | SH1106 | |
| Interface | 4-Wire SPI | |
| Size | 1.28 inch | |
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Supply Voltage for Logic | VCC | 1.65 | 5.5 | V |
| Operating Temperature | TOP | -40 | +80 | °C |
| Storage Temperature | TSTG | -40 | +85 | °C |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage for Logic | VCC | － | 3.0 | 3.3 | 5.2 | V |
| Input High Volt. | VIH | － | 0.8×VCC | － | VCC | V |
| Input Low Volt. | VIL | － | 0 | － | 0.2×VCC | V |
| Output High Volt. | VOH | － | 0.8×VCC | － | VCC | V |
| Output Low Volt. | VOL | － | 0 | － | 0.2×VCC | V |
| Display 50% Pixel on | ICC | VCC =3.3V | - | 25 | 37.5 | mA |
| No. | Symbol | Function |
|---|---|---|
| 1 | GND | Ground |
| 2 | VCC | Power supply input |
| 3 | D0 | The serial clock input |
| 4 | D1 | The serial data input |
| 5 | RES# | This is a reset signal input pad. When RESis set to "L", the settings are initialized. The reset operation is performed by the RES signal level. |
| 6 | D/C# | This is the Data/Command control |
| 7 | CS# | This pad is the chip select input |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
