Model No. WFN0500A4T0WADNC000
►Size : 5 inch
►Resolution : 800x480 pixels
►View Direction : IPS
►Interface : RGB
►Driver IC：FL58202DA
►Control-Board : No
►Brightness(cd/m²) : 400
►Frame Through Hole : No
►Touch Screen : Projected capacitive touch screen (PCAP)
►Touch Points: 5
►Operating Temperature : -30~+80°C (Wide Temperature)
WFN0500A4T0WADNC000 is a 5-inch IPS TFT LCD display module featuring an 800x480 pixel resolution, a 24-bit RGB interface, and a projected capacitive touch panel with 5-point touch support. The display is driven by the FL58202DA driver IC, while the PCAP uses the GT911 controller with an I2C interface.
The module measures 147.0 x 104.0 x 4.88 mm, with an active area of 108.0 x 64.8 mm. It features a Normally Black, transmissive TFT panel with an IPS wide viewing angle.
With a typical brightness of 400 cd/m² and an operating temperature range of -30℃ to +80℃, this TFT LCD display is suitable for industrial control systems, access control systems, medical equipment, smart home devices, handheld devices, and other embedded HMI applications.
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.0 | inch |
| Dot Matrix | 800 × 3(RGB) × 480 | dots |
| Module dimension | 147.00 (W) ×104.00 (H) × 4.88 | mm |
| Active area | 108(W) × 64.8 (H) | mm |
| Dot pitch | 0.135(W) × 0.135(H) | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 85/85/85/85 | |
| Aspect Ratio | 5:3 | |
| Driver IC | FL58202DA or equivalent | |
| Interface | 24 bit R.G.B | |
| Backlight Type | LED, Normally White | |
| CTP IC | GT911 or equivalent | |
| CTP Interface | I2C | |
| CTP FW Version | 65 | |
| CTP Resolution | 800*480 | |
| Touch Panel | Without Touch Panel | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Item |
Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| Power voltage | VDD | 3.0 | 3.3 | 3.6 | V |
| Current for Driver(Black) | IDD | － | 82 | 123 | mA |
| Input logic high voltage | VIH | 0.7 VDD | － | VDD | V |
| Input logic low voltage | VIL | 0 | － | 0.3 VDD | |
| Supply CTP | VDDT | 2.8 | － | 3.3 | V |
| IDDT | － | 14.0 | 21.0 | mA | |
Item |
Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| Voltage for LED backlight | VLED | 12.5 | 14.0 | 15.5 | V |
| Current for LED backlight | ILED | － | 30 | － | mA |
| LED life time | － | 50,000 | － | － | Hr |
FPC Connector is used for the module electronics interface.
| Pin No | Symbol | Function |
|---|---|---|
| 1 | VLED- | Power for LED backlight (Cathode) |
| 2 | VLED+ | Power for LED backlight (Anode) |
| 3 | GND | Power Ground |
| 4 | VDD | Power voltage |
| 5 | R0 | Red data (LSB) |
| 6 | R1 | Red data |
| 7 | R2 | Red data |
| 8 | R3 | Red data |
| 9 | R4 | Red data |
| 10 | R5 | Red data |
| 11 | R6 | Red data |
| 12 | R7 | Red data(MSB) |
| 13 | G0 | Green data(LSB) |
| 14 | G1 | Green data |
| 15 | G2 | Green data |
| 16 | G3 | Green data |
| 17 | G4 | Green data |
| 18 | G5 | Green data |
| 19 | G6 | Green data |
| 20 | G7 | Green data(MSB) |
| 21 | B0 | Blue data(LSB) |
| 22 | B1 | Blue data |
| 23 | B2 | Blue data |
| 24 | B3 | Blue data |
| 25 | B4 | Blue data |
| 26 | B5 | Blue data |
| 27 | B6 | Blue data |
| 28 | B7 | Blue data(MSB) |
| 29 | GND | Power Ground |
| 30 | CLK | Sample clock (DCLK) |
| 31 | DISP | Display on/off |
| 32 | NC | No connection |
| 33 | NC | No connection |
| 34 | DE | Data input enable |
| 35 | NC | No connection |
| 36 | GND | Power Ground |
| 37 | NC | No connection |
| 38 | NC | No connection |
| 39 | NC | No connection |
| 40 | NC | No connection |
| Pin No | Symbol | Function |
|---|---|---|
| 1 | VSS | Ground for analog circuit |
| 2 | VDDT | Power Supply |
| 3 | SCL | I2C clock input |
| 4 | NC | No connect |
| 5 | SDA | I2C data input and output |
| 6 | NC | No connect |
| 7 | /RST | External Reset, Low is active |
| 8 | NC | No connect |
| 9 | /INT | External interrupt to the host |
| 10 | VSS | Ground for analog circuit |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.