Model No. WFN0570A2S0WADNN000
►Size : 5.7 inch
►Resolution : 640x480 pixels
►View Direction : 89/89/89/89 (IPS)
►Interface : RGB18bits SYNC+DE mode
►Driver IC：JD9168S
►Control-Board : No
►Brightness(cd/m2) : 1250
►Frame Through Hole : No
►Touch Screen : No
WFN0570A2S0WADNN000 is a 5.7-inch high brightness, wide temperature IPS TFT LCD display with a 640x480 resolution and a 4:3 aspect ratio. It provides a typical brightness of 1250 cd/m² and features an anti-glare surface for improved visibility in high-ambient-light environments.
The IPS panel provides wide viewing angles of 89/89/89/89 degrees. The module measures 124.7 x 100.0 x 5.91 mm, with an active area of 115.2 x 86.4 mm.
The display is equipped with a JD9168S TFT driver IC or equivalent and supports an 18-bit RGB interface with SYNC+DE mode. The TFT operates from a typical 3.15V supply and is supplied without a touch panel.
With an operating temperature range of -30°C to +85°C, WFN0570A2S0WADNN000 is suitable for industrial HMI, control equipment, instrumentation, and other embedded display applications requiring high brightness, wide viewing angles, and wide temperature operation.
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.7 | inch |
| Dot Matrix | 640 × RGB × 480(TFT) | dots |
| Module dimension | 124.7(W) × 100.0(H) × 5.91(D) | mm |
| Active area | 115.2×86.4 | mm |
| Dot pitch | 0.18×0.18 | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 89/89/89/89 | |
| TFT Driver IC | JD9168S or Equivalent | |
| TFT Interface | RGB18bits SYNC+DE mode | |
| Aspect Ratio | 4:3 | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Without Touch Panel | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +85 | ℃ |
| Storage Temperature | TST | -40 | － | +85 | ℃ |
| Parameter | Symbol | Condition | Min | Typ | Max | Unit | |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | Ta=25⁰C | 3.0 | 3.15 | 3.3 | V | |
| Input voltage | H | VIH | VCC=3.0V | 0.7VCC | - | VCC | |
| L | VIL | VCC=3.0V | 0 | - | 0.3VCC | mW | |
| Power supply Current | ICC | VCC=3.0V | - | 50 | 75 | mA | |
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| LED current | - | - | 160 | - | mA |
| LED voltage | VLED+ | 15.6 | 18.0 | 19.2 | V |
| LED Life Time | - | 50,000 | - | - | Hr |
| Pin No. | Symbol | I/O | Function |
|---|---|---|---|
| 1 | GND | P | Ground. |
| 2 | VCC | P | Power supply for TFT |
| 3 | VCC | P | Power supply for TFT |
| 4 | GND | P | Ground. |
| 5 | NC | - | No connection |
| 6 | GND | P | Ground. |
| 7 | NC | - | No connection |
| 8 | GND | P | Ground. |
| 9 | UD | I | Up/down selection |
| 10 | LR | I | Left /right selection |
| 11 | /CSX | I | Chip select pin. 0: Chip can be accessed; 1: Chip cannot be accessed. If this pin is not used, please connect it to VCC. |
| 12 | SCL | I | Serial clock input in SPI interface .If not use, let it open or VCC or GND. |
| 13 | SDA | I | Serial data input / output pin in SPI interface operation. If not use, let it open. |
| 14 | NC | - | No connection |
| 15 | GND | P | Ground. |
| 16 | B5 | I | Blue Data bus |
| 17 | B4 | I | Blue Data bus |
| 18 | B3 | I | Blue Data bus |
| 19 | B2 | I | Blue Data bus |
| 20 | B1 | I | Blue Data bus |
| 21 | B0 | I | Blue Data bus |
| 22 | NC | - | No connection |
| 23 | NC | - | No connection |
| 24 | GND | P | Ground. |
| 25 | G5 | I | Green Data bit |
| 26 | G4 | I | Green Data bit |
| 27 | G2 | I | Green Data bit |
| 28 | G2 | I | Green Data bit |
| 29 | G1 | I | Green Data bit |
| 30 | G0 | I | Green Data bit |
| 31 | NC | - | No connection |
| 32 | NC | - | No connection |
| 33 | GND | P | Ground. |
| 34 | NC | - | No connection |
| 35 | NC | - | No connection |
| 36 | GND | P | Ground. |
| 37 | R5 | I | Red Data bit |
| 38 | R4 | I | Red Data bit |
| 39 | R3 | I | Red Data bit |
| 40 | R2 | I | Red Data bit |
| 41 | R1 | I | Red Data bit |
| 42 | R0 | I | Red Data bit |
| 43 | VLED- | P | Power supply for LED cathode |
| 44 | VLED+ | P | Power supply for LED anode |
| 45 | DE | I | Data enable input in RGB interface. |
| 46 | CLK | I | Pixel clock input in RGB interface. |
| 47 | HS | I | Horizontal sync input in RGB interface. |
| 48 | VS | I | Vertical sync input in RGB interface |
| 49 | NC | - | No connection |
| 50 | GND | P | Ground. |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
