Model No. WEA016080A
►Type: Graphic
►Structure: COG+PCB
►Size: 1.54 inch
►160 x 80 Dot Matrix
►IC：SSD1320
►3V Power supply
►1/80 duty
►Interface: SPI
►Display Color: White
►Support Grayscale
The WEA016080A Series 1.54-inch OLED Display features a 160x80 resolution and a PCB design that simplifies the customer's PCB design process. It also includes mounting holes for easier installation, offering a reliable solution for various applications.
The WEA016080A Series OLED Display offers an efficient and reliable display solution for portable, wearable, and industrial products.
Data Source ref:WEA016080AWPP3N00000
| Item | Dimension | Unit |
|---|---|---|
| Dot Matrix | 160 x 80 Dots | － |
| Module dimension | 43.5 x 22.5 x 5.96 | mm |
| Active Area | 35.02 x 17.50 | mm |
| Pixel Size | 0.199 x 0.199 | mm |
| Pixel Pitch | 0.219 x 0.219 | mm |
| Display Mode | Passive Matrix | |
| Display Color | Monochrome | |
| Drive Duty | 1/80 Duty | |
| Gray Scale | 4 bits | |
| Interface | 4-Wire SPI | |
| IC | SSD1320 | |
| Size | 1.54 inch | |
| Parameter | Symbol | Min | Typ. | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage for Display | VCC | -0.3 | － | 5.5 | V |
| Operating Temperature | TOP | -40 | － | +80 | °C |
| Storage Temperature | TSTG | -40 | － | +85 | °C |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage for Logic | VCC | － | 2.8 | 3.0 | 5.2 | V |
| High Level Input | VIH | － | 0.8×VCC | － | VCC | V |
| Low Level Input | VIL | － | 0 | － | 0.2×VCC | V |
| High Level Output | VOH | － | 0.9×VCC | － | VCC | V |
| Low Level Output | VOL | － | 0 | － | 0.1×VCC | V |
| Display 50% Pixel on | ICC | VCC=3V | － | 110 | 220 | mA |
| No. | Symbol | Function |
|---|---|---|
| 1 | GND | Ground |
| 2 | VCC |
Power Supply for OEL Panel |
| 3 | D0 | The serial clock input |
| 4 | D1 | The serial data input |
| 5 | RES# | Power Reset for Controller and Driver This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. |
| 6 | D/C# | Data/Command Control This pin is Data/Command control pin. |
| 7 | CS# | Chip Select This pin is the chip select input. The chip is enabled for MCU communication only when CS# is pulled low. |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
