Model No. WEG010016E
►Type: Graphic
►Structure: COB
►2.4" OLED Display
►100 x 16 Dot Matrix
►IC：WS0010-TX
►5V power supply
►1/16 duty cycle
►Interface: 6800, option 8080, SPI
►Display Color: White / Yellow / Blue / Green / Red
Winstar WEG010016E is 2.4" OLED Display which is made of 100x16 pixels. This display is built-in WS0010-TX controller is able to communicate using either an 8 bit or 4 bit parallel microcontroller interface. This 2.4 inch OLED display has different interface available, default 6800 or option 8080. The operating temperature and storage temperature ranges of the WEG010016E are -40 ℃ ~ 80 ℃. The WEG010016E module and WEG010016A, WEG010016C, WEG010016D are all have the same OLED panel size, but using different PCB design. The customers can choose best module for their applications.
| Item | Dimension | Unit |
|---|---|---|
| Dot Matrix | 100×16 Dots | － |
| Module dimension | 84.0 × 44.0 × 10.0(MAX) | mm |
| View area | 66.0 × 16.0 | mm |
| Active area | 59.95 × 11.15 | mm |
| Dot size | 0.55 × 0.65 | mm |
| Dot pitch | 0.60 × 0.70 | mm |
| Panel Type | OLED , Monochrome | |
| Duty | 1/16 | |
| Interface | 6800, option 8080, SPI | |
| IC | WS0010-TX | |
| SIZE | 2.4 inch | |
| Item | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Operating Temperature | TOP | -40 | +80 | °C |
| Storage Temperature | TST | -40 | +85 | °C |
| Supply Voltage For Logic | VDD-VSS | -0.3 | 5.3 | V |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | － | 4.8 | 5.0 | 5.3 | V |
| Input High Volt. | VIH | － | 0.8xVDD | － | VDD | V |
| Input Low Volt. | VIL | － | GND | － | 0.2xVDD | V |
| Output High Volt. | VOH | IOH=-0.5mA | 0.8xVDD | － | VDD | V |
| Output Low Volt. | VOL | IOL=0.5mA | GND | － | 0.2xVDD | V |
| 50% Check Board Operating Current |
IDD | VDD=5V | － | 45 | 67.5 | mA |
| Pin No. | Symbol | Level | Description |
|---|---|---|---|
| 1 | VSS | 0V | Ground |
| 2 | VDD | 5.0V | Supply Voltage for logic |
| 3 | NC | － | |
| 4 | RS | H/L | H: DATA, L: Instruction code |
| 5 | R/W | H/L | H: Read(Module→MPU) L: Write(MPU→Module) |
| 6 | E | H,H→L | Chip enable signal |
| 7 | DB0 | H/L | Data bit 0 |
| 8 | DB1 | H/L | Data bit 1 |
| 9 | DB2 | H/L | Data bit 2 |
| 10 | DB3 | H/L | Data bit 3 |
| 11 | DB4 | H/L | Data bit 4 |
| 12 | DB5 | H/L | Data bit 5 |
| 13 | DB6 | H/L | Data bit 6 |
| 14 | DB7 | H/L | Data bit 7 |
| 15 | NC | － | |
| 16 | NC | － |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
