Home Products TFT LCD For HDMI Signal TFT LCD WF52ASZFSDHGV

5.2” For HDMI Signal PCAP Bar TFT (For Raspberry PI Series Use)

Model No. WF52ASZFSDHGV

►Size : 5.2”
►Resolution : 480x128 dots
►View Direction : O-TFT
►Interface : Support HDMI Connector (Only DVI Signal)
►Controller IC : TFP401
►Control-Board : Yes
►Brightness (cd/m²) : 700
►Frame Through Hole : No
►Touch Screen : Projected capacitive touch screen (PCAP)
►Detect Point (Fingers) : 1 / 2 / Option
►O-Film : Yes
►Operating Temperature : -20~+70℃

Description

WF52ASZFSDHGV is a 5.2” O-Film Bar Type TFT LCD module having resolution 480x128 with Projected Capacitive Touch Screen (PCAP); this TFT LCD with PCAP module only supports Raspberry Pi series. WF52ASZFSDHGV is built in with TFP401 Controller IC convert signal to support HDMI signal interface, as to the PCAP (CTP) IC is GT911, its I2C interface convert to USB; CTP firmware version 0x99. WF52A for Raspberry PI series is also available for Resistive Touch Screen (RTP) or without Touch Screen options. Please note WF52ASZFSDHGV is only working with Raspberry Pi1 ~ Pi3/Pi3B/Pi3B+. If the customer needs to use other Raspberry Pi version which is not mentioned in the above list. Please contact us for a special module part number.

The supply voltage for LCM (VDD) of WF52ASZFSDHGV is typical value 5V. It is featured with Glare surface panel and O-Film, View Direction 6 o'clock, Gray scale inversion 12 o'clock, brightness 600 ~700 nits. It can be operating at temperatures from -20 ℃ to +70 ℃ and storage temperatures from -30 ℃ to +80 ℃.

DRAWING

5.2” HDMI PCAP Bar TFT for Raspberry PI Series - WF52ASZFSDHGV

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 5.2 inch
Dot Matrix 480 ×3(RGB) × 128 dots
Module dimension 180.0 × 75.8 × 23.94 (Max) mm
Active area 127.152 × 33.9072 mm
Dot pitch 0.0883 × 0.2649 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Aspect Ratio Bar Type
Backlight Type LED, Normally White
Controller IC TFP401
Interface Support HDMI Connector (Only DVI Signal)
Touch Panel Projected capacitive touch panel (PCAP)
PCAP IC GT911 or equivalent
PCAP Interface USB
PCAP FW Version 0x99
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD - 5 - V
Supply Current For LCM IDD 1200 1800 mA
LED life time 50,000 Hr

Interface

LCM PIN Definition(CON4)

Pin Symbol Function
1 NC No connector
2 5V Raspberry Pi:Power 5V
3 GPIO02 Raspberry Pi:GPIO02
4 5V Raspberry Pi:Power 5V
5 GPIO03 Raspberry Pi:GPIO03
6 GND Raspberry Pi:GND
7 GPIO04 Raspberry Pi:GPIO04
8 GPIO14 Raspberry Pi:GPIO14
9 GND Raspberry Pi:GND
10 GPIO15 Raspberry Pi:GPIO15
11 GPIO17 Raspberry Pi:GPIO17
12 BL_E (GPIO18) Raspberry Pi:GPIO18 (Backlight Enable)
13 GPIO27 Raspberry Pi:GPIO27
14 GND Raspberry Pi:GND
15 GPIO22 Raspberry Pi:GPIO22
16 GPIO23 Raspberry Pi:GPIO23
17 NC No connector
18 GPIO24 Raspberry Pi:GPIO24
19 GPIO10 Raspberry Pi:GPIO10
20 GND Raspberry Pi:GND
21 GPIO09 Raspberry Pi:GPIO09
22 GPIO25 Raspberry Pi:GPIO25
23 GPIO11 Raspberry Pi:GPIO11
24 GPIO08 Raspberry Pi:GPIO08
25 GND Raspberry Pi:GND
26 GPIO07 Raspberry Pi:GPIO07
27 ID_SD Raspberry Pi:ID_SD
28 ID_SC Raspberry Pi:ID_SC
29 GPIO05 Raspberry Pi:GPIO05
30 GND Raspberry Pi:GND
31 GPIO06 Raspberry Pi:GPIO06
32 GPIO12 Raspberry Pi:GPIO12
33 GPIO13 Raspberry Pi:GPIO13
34 GND Raspberry Pi:GND
35 GPIO19 Raspberry Pi:GPIO19
36 GPIO16 Raspberry Pi:GPIO16
37 GPIO26 Raspberry Pi:GPIO26
38 GPIO20 Raspberry Pi:GPIO20
39 GND Raspberry Pi:GND
40 GPIO21 Raspberry Pi:GPIO21


LCM PIN Definition(CON5)

Pin Symbol Function
1 3.3V TFT Module Power limit can only output 3.3V,100mA
2 5V Raspberry Pi:Power 5V
3 GPIO02 Raspberry Pi:GPIO02
4 5V Raspberry Pi:Power 5V
5 GPIO03 Raspberry Pi:GPIO03
6 GND Raspberry Pi:GND
7 GPIO04 Raspberry Pi:GPIO04
8 GPIO14 Raspberry Pi:GPIO14
9 GND Raspberry Pi:GND
10 GPIO15 Raspberry Pi:GPIO15
11 GPIO17 Raspberry Pi:GPIO17
12 BL_E (GPIO18) Raspberry Pi:GPIO18 (Backlight Enable)
13 GPIO27 Raspberry Pi:GPIO27
14 GND Raspberry Pi:GND
15 GPIO22 Raspberry Pi:GPIO22
16 GPIO23 Raspberry Pi:GPIO23
17 3.3V TFT Module Power limit can only output 3.3V,100mA
18 GPIO24 Raspberry Pi:GPIO24
19 GPIO10 Raspberry Pi:GPIO10
20 GND Raspberry Pi:GND
21 GPIO09 Raspberry Pi:GPIO09
22 GPIO25 Raspberry Pi:GPIO25
23 GPIO11 Raspberry Pi:GPIO11
24 GPIO08 Raspberry Pi:GPIO08
25 GND Raspberry Pi:GND
26 GPIO07 Raspberry Pi:GPIO07
27 ID_SD Raspberry Pi:ID_SD
28 ID_SC Raspberry Pi:ID_SC
29 GPIO05 Raspberry Pi:GPIO05
30 GND Raspberry Pi:GND
31 GPIO06 Raspberry Pi:GPIO06
32 GPIO12 Raspberry Pi:GPIO12
33 GPIO13 Raspberry Pi:GPIO13
34 GND Raspberry Pi:GND
35 GPIO19 Raspberry Pi:GPIO19
36 GPIO16 Raspberry Pi:GPIO16
37 GPIO26 Raspberry Pi:GPIO26
38 GPIO20 Raspberry Pi:GPIO20
39 GND Raspberry Pi:GND
40 GPIO21 Raspberry Pi:GPIO21


HDMI

Pin No. Symbol I/O Function
1 Rx2+ I +LVDS Differential Data Input
2 GND P Ground
3 Rx2- I -LVDS Differential Data Input
4 Rx1+ I +LVDS Differential Data Input
5 GND P Ground
6 Rx1- I -LVDS Differential Data Input
7 Rx0+ I +LVDS Differential Data Input
8 GND P Ground
9 Rx0- I -LVDS Differential Data Input
10 RxC+ I +LVDS Differential Clock Input
11 GND P Ground
12 RxC- I -LVDS Differential Clock Input
13-14 NC - No connection
15 NC - No connection
16 NC - No connection
17 GND P Ground
18 5V P Power Supply
19 NC - No connection
I: input, O: output, P: Power


PCAP USB PIN Definition (CON3)

Pin Symbol Function
1 5V Power Supply (5V)
2 D- Data line -
3 D+ Data line +
4 NC No connection
5 GND Power Ground


POWER-JACK

Pin No. Symbol I/O Function
1 5V P Power Supply
2 GND P Ground
3 NC - No connection

Search keyword: tft 5.2, tft 5.2", 5.2 tft lcd, 5.2" tft lcd, 5.2 inch tft lcd, tft lcd 5.2, 5.2 tft display, 5.2" tft display, 5.2 inch tft display, tft display 5.2, tft display 5.2", 5.2 tft lcd
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms. See
Detail.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail