5.2 inch 480x128 Bar Type TFT LCD
Model No. WF52CTLBSDBN0
►Size : 5.2 inch
►Resolution : 480 x 128 dots
►View Direction : 6H
►Interface : 8080, MPU
►Controller IC：MR6566
►Control-Board : Yes
►Brightness (cd/m²): 500
►Frame Through Hole : No
►Touch Panel : Without Touch Panel
►O-Film : No
Description
WF52CTLBSDBN0 is a 5.2 inch Bar type TFT LCD featuring a controller board with screw holes on the PCB. The module has a resolution of 480×128 pixels and a brightness of 500 nits (typical value). WF52CTLBSDBN0 uses MR6566 driver IC supporting MCU 8080 8-bit interfaces. Its supply voltage for logic is 4.5V-5.5V with a typical value of 5V.
Customers using 240X64 (dots) STN with RA6963 controller IC can replace it with this new WF52CTLBSDBN0 module without changing the interfaces and firmware, easily upgrading your single-colored display to color TFT.
WF52CTLBSDBN0 can operate at temperatures from -20 to +70℃, and its storage temperatures cover from -30℃ to +80℃.
DRAWING
SPECIFICATIONS
Interface
LCM PIN Definition (CON4)| Pin | Symbol | Function |
|---|---|---|
| 1 | GND | Ground |
| 2 | NC | No connect |
| 3 | NC | No connect |
| 4 | D/C | Data/Command select |
| 5 | WR | Write control |
| 6 | RD | Read control |
| 7 | DB0 | Data bus |
| 8 | DB1 | Data bus |
| 9 | DB2 | Data bus |
| 10 | DB3 | Data bus |
| 11 | DB4 | Data bus |
| 12 | DB5 | Data bus |
| 13 | DB6 | Data bus |
| 14 | DB7 | Data bus |
| 15~24 | NC | No Connect |
| 25 | CS | Chip Select |
| 26 | RESET | Reset |
| 27 | LR | Right /Left selection; Default R/L is Pull High |
| 28 | UD | Up/down selection; Default U/D is Pull High |
| 29~32 | NC | No connection |
| 33~34 | GND | Ground |
| 35~36 | VDD5V | Power Supply (+5V) |
LCM PIN Definition (CON1)
(MCU8080 the same with the WG24064A for RA6963 serial)
| Pin | Symbol | Function |
|---|---|---|
| 1 | FG | System round pin of the IC. Connect to system ground |
| 2 | GND | Ground |
| 3 | VDD5V | Power Supply (+5V) |
| 4 | NC | No connect |
| 5 | WR | Write control |
| 6 | RD | Read control |
| 7 | CS | Chip select |
| 8 | D/C | Data/Command select |
| 9 | NC | No connection |
| 10 | RESET | Reset |
| 11 | DB0 | Data bus |
| 12 | DB1 | Data bus |
| 13 | DB2 | Data bus |
| 14 | DB3 | Data bus |
| 15 | DB4 | Data bus |
| 16 | DB5 | Data bus |
| 17 | DB6 | Data bus |
| 18 | DB7 | Data bus |
| 19~20 | NC | No connection |
| 21 | VDD5V | Power Supply (+5V) |
| 22 | GND | Ground. |
| 23~25 | NC | No connection |
| 26 | GND | Ground |
USB
| Pin | Symbol | Function |
|---|---|---|
| 1 | 5V | Power 5V |
| 2 | D- | Data line - |
| 3 | D+ | Data line + |
| 4 | NC | No connection |
| 5 | GND | Power Ground |
General Specifications
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.2 | inch |
| Dot Matrix | 480 × RGB × 128 | dots |
| Module dimension | 180.0 x 65.0 x 11.1 | mm |
| Active area(AA) | 127.152 × 33.9072 | mm |
| Dot pitch | 0.0883 × 0.2649 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 6 o'clock | |
| Gray Scale Inversion Direction | 12 o'clock | |
| Aspect Ratio | Bar Type | |
| Backlight Type | LED, Normally White | |
| Controller IC | MR6566 | |
| Interface | Digital 8080 family MPU 8bit/16bit | |
| Touch Panel | Without touch panel | |
| Surface | Glare | |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Electrical Characteristics
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage For LCM | VDD | 4.5 | 5.0 | 5.5 | V |
| Supply Current For LCM | IDD | － | 500 | 750 | mA |
| LED Life Time | － | 50,000 | － | Hr |
