Home Products TFT LCD TFT Panel + Controller Board WF43WTYBEDAT0

4.3 inch IPS 480x272 RTP with Controller Board, Frame


►Size : 4.3 inch
►Resolution : 480×272 dots
►View Direction : IPS
►Interface : MCU
►Controller IC:SSD1963
►Control-Board : YES
►Brightness (cd/m²): 350
►Frame Through Hole: YES
►Touch Screen : Resistive Touch Screen


WF43WTYBEDAT0 is a 4.3 inch Resistive Touch TFT Display with Controller Board. The module has 480x272 pixels resolution and 350 cd/m2 brightness. It uses an IPS screen to offer wider viewing angles. WF43WTYBEDAT0 is equipped with an SSD1963 controller IC, supporting 8080 MCU 8bit interface. The module dimension is 106.7x 83.98 mm, and its active area is 95.04 x 53.86 mm. The supply voltage for analog ranges from 3.0V to 3.6V; the typical value is 3.3V.

The WF43WTYBEDAT0 module can operate at temperatures from -20°C to +70°C; its storage temperatures range from -30°C to +80°C.


4.3 inch IPS 480x272 RTP with Controller Board, Frame - WF43WTYBEDAT0



LCM PIN Definition

Pin Symbol Function
1 GND System round pin of the IC. Connect to system ground.
2 VDD Power Supply
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7 DB0 Data bus
8 DB1 Data bus
9 DB2 Data bus
10 DB3 Data bus
11 DB4 Data bus
12 DB5 Data bus
13 DB6 Data bus
14 DB7 Data bus
15 CS Chip select
16 RESET Hardware reset
17 NC No connection
18 XR Right electrode
19 DISP_ON Display control H: On \ L:Off
20 YD Bottom electrode
21 XL Left electrode
22 YU Top electrode

General Specifications

Item Dimension Unit
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 106.7x 83.98 x 9.2 mm
Active Area (AA) 95.04 x 53.86 mm
Dot pitch 0.066 × 0.198 mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 16:9
Backlight Type LED, Normally White
Controller IC SSD1963 
Interface Digital 8080 family MPU 8bit/16bit
Touch Screen Resistive Touch Panel (RTP)
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Item Symbol Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.3 3.6 V
Supply Current For LCM IDD - 270 405 mA

LED driving conditions

Parameter Symbol Min Typ Max Unit
LED current - - 20 - mA
Power Consumption - 540 640 680 mW
LED voltage VLED+ 27 32 34 V
LED Life Time - - 50,000 - Hr
go top