Projected Capacitive Touch Screen Bar TFT LCD Display 5.2"
Model No. WF52QTLBSDBG0
►Size : 5.2”
►Resolution : 480 x 128 dots
►View Direction : 6H
►Interface : 8080, MPU
►Controller IC : SSD1963
►Control-Board : Yes
►Brightness (cd/m²): 400
►Frame Through Hole : Yes
►Touch Screen : PCAP, Projected Capacitive Touch Screen
►Detect Point : 5 Fingers
Description
WF52QTLBSDBG0 is a 5.2-inch bar-type TFT touch display. The module features a Projected Capacitive Touch Panel (PCAP) supporting 5-point detection. It has a resolution of 480×128 dots and a high brightness of 400 cd/m2. The module dimension is 180.0 × 65.0 × 11.8 mm with an active area of 127.152 × 33.9072 mm. The display features a glare surface, 6 o'clock view direction, and 12 o'clock gray scale inversion direction.
WF52QTLBSDBG0 is built-in with SSD1963 driver IC, supporting 8080 MPU interfaces. The supply voltage for LCM (VDD) is from 3.0V to 3.3V (typical value: 3.1V). This bar TFT can operate at a temperature range from -20℃ to +70℃, and its storage temperatures are from -30℃ to +80℃.
WF52QTLBSDBG0 is built-in with SSD1963 driver IC, supporting 8080 MPU interfaces. The supply voltage for LCM (VDD) is from 3.0V to 3.3V (typical value: 3.1V). This bar TFT can operate at a temperature range from -20℃ to +70℃, and its storage temperatures are from -30℃ to +80℃.
DRAWING
SPECIFICATIONS
Interface
LCM PIN Definition (CON4)Pin | Symbol | Function |
---|---|---|
1 | GND | System round pin of the IC. Connect to system ground. |
2 | VDD | Power Supply : +3.3V |
3 | BL_E | Backlight control signal , H: On \ L: Off |
4 | D/C | Data/Command select |
5 | WR | Write strobe signal |
6 | RD | Read strobe signal |
7~14 | DB0~DB7 | Data bus |
15~22 | DB8~DB15 | Data bus (When select 8bits mode, this pin is NC) |
23 | NC | No connect |
24 | CTP_INT | CTP_ External interrupt to the host |
25 | CS | Chip select |
26 | RESET | Hardware reset |
27 | LR | Right /Left selection; Default R/L is Pull High |
28 | UD | Up/down selection; Default U/D is Pull High |
29 | CTP_SCL | CTP_SPI Slave mode, chip select, active low / I2C clock input |
30 | CTP_SDA | CTP_ SPI Slave mode, data input / I2C data input and output |
31 | CTP_RST | CTP_ External Reset, Low is active |
32 | NC | No connect |
33 | VLED- | VLED- for B/L LED inverter (GND) |
34 | VLED- | VLED- for B/L LED inverter (GND) |
35 | VLED+ | VLED+ for B/L LED inverter (+5V) |
36 | VLED+ | VLED+ for B/L LED inverter (+5V) |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 5.2 | inch |
Dot Matrix | 480 × RGB × 128 | dots |
Module dimension | 180.0 × 65.0 × 11.8 | mm |
Active area | 127.152 × 33.9072 | mm |
Dot pitch | 0.0883 × 0.2649 | mm |
LCD type | TFT, Normally White, Transmissive | |
View Direction | 6 o'clock | |
Gray Scale Inversion Direction | 12 o'clock | |
Aspect Ratio | Bar Type | |
Backlight Type | LED,Normally White | |
Driver IC | SSD1963 | |
Interface | Digital 8080 family MPU 8bit/16bit | |
With /Without TP | PCAP, Projected capacitive touch panel | |
Surface | Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage For LCM | VDD | - | 3.0 | 3.1 | 3.3 | V |
Supply Current For LCM | IDD | - | - | 200 | - | mA |
Search keyword: tft 5.2, tft 5.2", 5.2 tft lcd, 5.2" tft lcd, 5.2 inch tft lcd, tft lcd 5.2, 5.2 tft display, 5.2" tft display, 5.2 inch tft display, tft display 5.2, tft display 5.2",bar type tft