480x1280 TFT LCD Display 6.75-inch Bar Type TFT DSI
Model No. WF0675ASYAB6MNN0
►Size : 6.75-inch (Portrait mode)
►Resolution : 480 x 1280 dots
►View Direction : IPS
►Interface : MIPI DSI
►Driver IC：FL7703NI-G5-DP
►Control-Board : No
►Brightness(cd/m²) : 1200
►Frame Through Hole : No
►Touch Screen : Without Touch Panel
Description
WF0675ASYAB6MNN0 is a 6.75-inch bar type TFT-LCD module that adopts TFT IPS technology, providing impressive sharpness, superior color reproduction, better image consistency, and a high contrast ratio of 1500:1 (typical value). It boasts wide viewing angles (left: 85 / right: 85 / top: 85 / bottom: 85 degrees), high brightness of 1200 nits (typical value), and high resolution of 480×1280 dots. The module dimension is 66.8 x 181.1 mm, with an active area of 60.19 x 160.512 mm.
WF0675ASYAB6MNN0 has built-in FL7703NI-G5-DP driver IC and supports MIPI interface. It has the advantages of low power consumption, high transmission rate, support for multiple data encoding formats, low noise and interference. The operating temperature range is -20°C to +70°C; the storage temperature range is -30°C to +80°C. The supply voltage for logic is 3.0V to 3.6V, with a typical value of 3.3V.
This IPS TFT-LCD can be applied to a variety of industries, such as Gaming, Audio, and water quality testing.
DRAWING
SPECIFICATIONS
Interface Pin Function
LCM PIN Definition
| Pin No. | Symbol | Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | D3N | High speed interface data differential signal input pins. |
| 3 | D3P | |
| 4 | GND | Ground |
| 5 | D2N | High speed interface data differential signal input pins. |
| 6 | D2P | |
| 7 | GND | Ground |
| 8 | CLKN | High speed interface clock differential signal input pins. OPEN |
| 9 | CLKP | |
| 10 | GND | Ground |
| 11 | D1N | High speed interface data differential signal input pins. |
| 12 | D1P | |
| 13 | GND | Ground |
| 14 | D0N | High speed interface data differential signal input/output pins. |
| 15 | D0P | |
| 16 | GND | Ground |
| 17 | GND | Ground |
| 18 | TE | Serve as a TE (Tearing Effect) output signal Leave the pin open when not in use. |
| 19 | RESET | Reset pin. This signal will reset the device and must be applied to properly initialize the chip. |
| 20 | GND | Ground |
| 21-23 | VCC | Power supply |
| 24 | GND | Ground |
| 25-28 | NC | No connection |
| 29 | VLED- | Power for LED backlight cathode |
| 30 | VLED+ | Power for LED backlight anode |
General Specifications
| Item | Dimension | Unit |
|---|---|---|
| Size | 6.75 | inch |
| Dot Matrix | 480 x 3(RGB) x 1280 | dots |
| Module dimension | 66.8 x 181.1 x 4.55 | mm |
| Active area | 60.19 x 160.512 | mm |
| Pixel pitch | 0.1254 x 0.1254 | mm |
| LCD type | TFT, Normally Black ,Transmissive | |
| View Angle | 85/85/85/85 | |
| TFT Control IC | FL7703NI-G5-DP | |
| TFT Interface | MIPI DSI | |
| Backlight Type | LED,Normally White | |
| Touch Panel | Without Touch Panel | |
| Surface | Glare | |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Electrical Characteristics
Operating conditions
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage For Logic | VCC | 3.0 | 3.3 | 3.6 | V |
| Supply LCM current | Icc | － | 80 | 120 | mA |
LED driving conditions
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| LED current | － | － | 180 | － | mA |
| LED voltage | VLED+ | 15.6 | 18.0 | 20.4 | V |
| LED Life Time | － | － | 50,000 | － | Hr |
Search keyword: tft 6.75, tft 6.75", 6.75 tft lcd, 6.75" tft lcd, 6.75 inch tft lcd, tft lcd 6.75, 6.75 tft display, 6.75" tft display, 6.75 inch tft display, tft display 6.75, tft display 6.75"
