Model No. WF70C9SYAB4MNC10
►Size : 7-inch (Portrait mode)
►Resolution : 280×1424 dots
►View Direction : IPS
►Interface:MIPI DSI
►Driver IC : OTA7290N-C
►Control-Board : No
►Brightness(cd/m²): 800
►Frame Through Hole : No
►Touch Screen : Projected capacitive touch screen (PCAP)
►Detect Point : 5 Finger
The WF70C9SYAB4MNC10 is a stretched bar LCD display offering high resolution with 280 x 1424 dots. This 7-inch stretched LCD display features an active area of 33.6 x 170.88 mm, providing a visually striking display. With IPS technology, it delivers vibrant colors and wide viewing angles (80 degrees in all directions), making it ideal for space-constrained installations that demand high visual impact.
Supporting high-speed data transmission, this stretched display is equipped with the MIPI DSI interface and powered by the built-in OTA7290N-C driver IC. It also includes a projected capacitive touch screen (PCAP), which can detect up to 5 touch points, offering a highly interactive experience. Widely used in audio systems, mixing consoles, and 1U height equipment, the WF70C9SYAB4MNC10 is the perfect solution for applications requiring a stretched bar display.
With a supply voltage range of 3.0V to 3.6V and an operating temperature range from -20°C to +70°C, this display is built to perform reliably in a variety of industrial environments.
| Item | Dimension | Unit |
|---|---|---|
| Size | 7.0 | inch |
| Dot Matrix | 280 x RGB x 1424(TFT) | dots |
| Module dimension | 43.3 x 201.0 x 5.76 | mm |
| Active area | 33.6 x 170.88 | mm |
| Pixel pitch | 0.12 x 0.12 | mm |
| LCD type | TFT, Normally Black ,Transmissive | |
| View Angle | 80/80/80/80 | |
| Aspect Ratio | 1:5 | |
| Driver IC | OTA7290N-C | |
| Interface | 4-Lanes MIPI | |
| PCAP Driver IC | GT911 | |
| PCAP Interface | I2C | |
| PCAP FW Version | 100 | |
| PCAP Resolution | X:1424 , Y:280 | |
| Backlight Type | LED,Normally White | |
| Touch Panel | Projected capacitive touch screen (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Analog Supply voltage | VCC | 3.0 | 3.3 | 3.6 | V |
| Analog supply current | ICC | － | 115 | 175 | mA |
| Logic input voltage | VIH | 0.7*VCC | － | VCC | V |
| VIL | GND | － | 0.3*VCC | V | |
| Supply CTP | VDDT | 2.8 | 3.3 | 3.6 | V |
| IDDT | － | 12.2 | 20 | mA |
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| LED current | － | － | 240 | － | mA |
| LED voltage | VLED+ | 5.5 | 6.0 | 6.8 | V |
| LED Life Time | － | 50,000 | － | － | Hr |
| Pin No. | Symbol | Description |
|---|---|---|
| 1 | GND | Ground. |
| 2 | D3N | MIPI data input pins |
| 3 | D3P | |
| 4 | GND | Ground. |
| 5 | D2N | MIPI data input pins |
| 6 | D2P | |
| 7 | GND | Ground. |
| 8 | CLKN | MIPI clock input pins. |
| 9 | CLKP | |
| 10 | GND | Ground. |
| 11 | D1N | MIPI data input pins |
| 12 | D1P | |
| 13 | GND | Ground. |
| 14 | D0N | MIPI data input pins |
| 15 | D0P | |
| 16 | GND | Ground. |
| 17 | GND | Ground. |
| 18 | TE | Tearing effect output pin to synchronize to frame writing. If not used, open this pin |
| 19 | RESET | Reset signal pin |
| 20 | GND | Ground. |
| 21-23 | VCC | Power supply |
| 24 | GND | Ground. |
| 25-26 | NC | Not connect |
| 27-28 | VLED- | LED cathode |
| 29-30 | VLED+ | LED anode |
| Pin No. | Symbol | Description |
|---|---|---|
| 1 | VSS | Ground |
| 2 | INT | Interrupt request to the host |
| 3 | RST | Wakeup request from the host |
| 4 | SDA | I2C data input and output |
| 5 | SCL | I2C clock input |
| 6 | VDDT | Power supply |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
