6.75-inch Bar Type TFT LCD 480x1280 MIPI DSI with PCAP
Model No. WF0675ATYAB6MNG0
►Size : 6.75-inch (Portrait mode)
►Resolution : 480 x 1280 dots
►View Direction : IPS
►Interface : MIPI DSI
►Driver IC：FL7703NI-G5-DP
►Control-Board : No
►Brightness(cd/m²) : 400
►Frame Through Hole : No
►Touch Screen : Projected capacitive touch screen (PCAP)
►Detect Point : 5 Finger
Description
WF0675ATYAB6MNG0 is a 6.75-inch bar type TFT-LCD display module, adopting TFT IPS technology, providing remarkable sharpness, superior color reproduction, better image consistency, and high contrast ratio of 1500:1 (typical value), with a wide viewing angle (left: 85 / right: 85 / top: 85 / bottom: 85 degrees), brightness of 400 nits (typical value), and resolution of 480×1280 dots.
WF0675ATYAB6MNG0 is equipped with the FL7703NI-G5-DP driver IC and supports the MIPI interface, offering advantages such as low power consumption, high transmission rate, support for multiple data encoding formats, low noise, and interference. This TFT features a PCAP touchscreen panel (supporting 5-point touch), with the built-in GT911 driver IC and support for the I2C interface. The operating temperature ranges from -20°C to +70°C, and the storage temperature ranges from -30°C to +80°C. The operating voltage range is from 3.0V to 3.6V, with a typical value of 3.3V.
This IPS TFT-LCD can be applied to a variety of industries, such as Gaming, Audio, and water quality testing.
DRAWING
SPECIFICATIONS
Interface Pin Function
LCM PIN Definition
| Pin No. | Symbol | Pin Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | D3N | High speed interface data differential signal input pins. |
| 3 | D3P | |
| 4 | GND | Ground |
| 5 | D2N | High speed interface data differential signal input pins. |
| 6 | D2P | |
| 7 | GND | Ground |
| 8 | CLKN | High speed interface clock differential signal input pins. OPEN |
| 9 | CLKP | |
| 10 | GND | Ground |
| 11 | D1N | High speed interface data differential signal input pins. |
| 12 | D1P | |
| 13 | GND | Ground |
| 14 | D0N | High speed interface data differential signal input/output pins. |
| 15 | D0P | |
| 16 | GND | Ground |
| 17 | GND | Ground |
| 18 | TE | Serve as a TE (Tearing Effect) output signal Leave the pin open when not in use. |
| 19 | RESET | Reset pin. This signal will reset the device and must be applied to properly initialize the chip. |
| 20 | GND | Ground |
| 21-23 | VCC | Power supply |
| 24 | GND | Ground |
| 25-28 | NC | No connection |
| 29 | VLED- | Power for LED backlight cathode |
| 30 | VLED+ | Power for LED backlight anode |
CTP PIN Definition
| Pin | Symbol | Function |
|---|---|---|
| 1 | VSS | Ground for analog circuit |
| 2 | VDDT | Power Supply : +3.3V |
| 3 | SCL | I2C clock input |
| 4 | NC | No connection |
| 5 | SDA | I2C data input and output |
| 6 | NC | No connection |
| 7 | /RST | External Reset, Low is active |
| 8 | NC | No connection |
| 9 | /INT | External interrupt to the host |
| 10 | VSS | Ground for analog circuit |
General Specifications
| Item | Dimension | Unit |
|---|---|---|
| Size | 6.75 | inch |
| Dot Matrix | 480 x 3(RGB) x 1280 | dots |
| Module dimension | 74.4 x 1881.1 x 6.6 | mm |
| Active area | 60.19 x 160.512 | mm |
| Pixel pitch | 0.1254 x 0.1254 | mm |
| LCD type | TFT, Normally Black ,Transmissive | |
| View Angle | 85/85/85/85 | |
| Driver IC | FL7703NI-G5-DP | |
| Interface | MIPI DSI | |
| PCAP Driver IC | GT911 | |
| PCAP Interface | I2C | |
| PCAP FW Version | 0x70 | |
| PCAP Resolution | 480*1280 | |
| Backlight Type | LED,Normally White | |
| With /Without TP | Projected capacitive touch screen (PCAP) | |
| Surface | Glare | |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Electrical Characteristics
Operating conditions
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage For Logic | VCC | 3.0 | 3.3 | 3.6 | V |
| Supply LCM current | Icc | － | 80 | 120 | mA |
| Supply CTP | VCTP | 2.8 | 3.3 | 3.6 | mA |
| ICTP | － | 13.0 | 20.0 | mA |
LED driving conditions
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| LED current | － | － | 120 | － | mA |
| LED voltage | VLED+ | 15.6 | 18.0 | 20.4 | V |
| LED Life Time | － | － | 50,000 | － | Hr |
Search keyword: tft 6.75, tft 6.75", 6.75 tft lcd, 6.75" tft lcd, 6.75 inch tft lcd, tft lcd 6.75, 6.75 tft display, 6.75" tft display, 6.75 inch tft display, tft display 6.75, tft display 6.75"
