Model No. WL0F00101000JGDABSA00
►TFT Size: 10.1"
►TFT Resolution: 1024×600 dots
►TFT View Direction: IPS
►TFT Touch Screen: Capacitive Touch Panel
►Communication Interface: RS485
►Protocol: Modbus
►Brightness(cd/m²): 400
WL0F00101000JGDABSA00 is a 10.1-inch Smart Display_RS485 series TFT, defined as a slave device controlled by a master device via RS485 command to render display content on the display screen and return touch event data with Modbus protocol data. WL0F00101000JGDABSA00 is featured with WINSTAR wide temperature TFT WF101JTYAHLNB0 and a 4-layers FR4 PCBA built-in firmware. This 10.1" RS485 series TFT is an easy-to-use product that allows you to develop projects rapidly in a cost-effective way. WINSTAR RS485 Smart Display support single-master (HOST) platforms, such as a computer (with USB2RS485 Dongle), MCU, and Raspberry Pi.
Smart Display products are designed with STMicroelectronics' (ST) controller which supports ST development tools like TouchGFX and STM32CubeIDE. You can also use ST tools to design WINSTAR Smart Display modules besides GUI Builder.
Below are the features of this 10.1-inch RS485 Smart Display:
WINSTAR developed a Windows app. for Smart Display GUI design. WINSTAR GUI Builder software allows customers to simulate their GUI design in advance by using the drag-and-drop Widget preview function; customers can also create their ideal GUI. WINSTAR GUI Builder software supports Windows systems only; it can fulfill What You See Is What You Get (WYSIWYG). The new version of built-in software is a 3-in-1 APP; we combined three application templates for optional, including industrial, vehicle and medical applications. Please press the preferred application and hold for 3 seconds at the first time power on. Customers can change to another template by using GUI Builder to change the application.
Try before you buy! Contact us to download WINSTAR GUI Builder application.
We also provide demo set with all needed accessories for you to realize your GUI design on smart displays.
| Item | Standard Value | Unit |
|---|---|---|
| Operating voltage | 8V~28V dynamic | Vdc |
| Communication Interface | RS485 | - |
| MCU | STM32F746 | N/A |
| Flash Memory | 16 | MB |
| LCD display size | 10.1 | inch |
| Dot Matrix | 1024 x RGB x 600(TFT) | dots |
| Module dimension | 235(W) x 143(H) x 8.78(D) | mm |
| Active area | 222.72 (H) x 125.28(V) | mm |
| Pixel pitch | 0.2175(W) x 0.2088(H) | mm |
| Brightness | Min: 300; Typ: 400 | cd/m2 |
| LCD type | TFT, Normally White | |
| View Direction | 85/85/85/85 | |
| Aspect Ratio | 16:9 | |
| Touch Panel | With Projected Capacitive Touch Panel (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | － | 8 | 12 | 28 | V |
| Supply LCM current | I(mA) | － | － | 510 | － | mA |
| I/O Voltage | － | － | － | 3.3 | V | Note1 |
| Item | Description |
|---|---|
| LCM | WF101JTYAHLNB0# |
| PCBA | SV10010R100JB00N0101 |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | VIN | Power supply 8V to 28V input | Input |
| 2 | GND | Power supply GND input | Input |
| 3 | NC | - | - |
| 4 | NC | - | - |
| 5 | GND | Power supply GND input | GND |
| 6 | GND | Power supply GND input | GND |
| 7 | Reserve | USB_D- | Reserve |
| 8 | Reserve | USB_D+ | Reserve |
| 9 | NC | - | - |
| 10 | Reserve | USART RX interface(Reserve) | Reserve |
| 11 | Reserve | USART TX interface(Reserve) | Reserve |
| 12 | GND | Power supply GND input | GND |
| 13 | VIN | Power supply 8V to 28V input | Input |
| 14 | RS485_B | RS485 D- | I/O |
| 15 | RS485_A | RS485 D+ | I/O |
| 16 | GND | Power supply GND input | Input |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | +3V3 | 3.3V power for JTAG interface | Output |
| 2 | SWCLK | CLK pin for JTAG interface | Input |
| 3 | GND | GND for JTAG interface | Output |
| 4 | SWDIO | Data pin for JTAG interface | I/O |
| 5 | NRST | Reset pin for JTAG interface | Input |
| 6 | GND | GND | Output |
| 7 | Reserve | IO_8 for system Resume from suspend (Reserve) |
WKup,ADC,Timer,Event,I/O |
| 8 | Reserve | Reset (active Low) (Reserve) | I |
| 9 | Reserve | IO_0 (Reserve) | ADC,DAC,Timer,Event,I/O |
| 10 | Reserve | IO_1 (Reserve) | ADC,Timer,Event,I/O |
| 11 | Reserve | IO_2 (Reserve) | ADC,Timer,Event,I/O |
| 12 | Reserve | IO_3 (Reserve) | RST,Timer,Event,I/O |
| 13 | Reserve | IO_4 (Reserve) | RST,Timer,Event,I/O |
| 14 | Reserve | IO_5 (Reserve) | ADC,Timer,Event,I/O |
| 15 | Reserve | IO_6 (Reserve) | RST,Timer,Event,I/O |
| 16 | Reserve | IO_7 (Reserve) | RST,ADC,Event,I/O |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
