10.1-inch RS485 Smart Display with Touch, GPIO, and 32MB Flash (Modbus Protocol) - WL0F00101000JGDAESA02

10.1-inch RS485 Smart Display with Touch, GPIO, and 32MB Flash (Modbus Protocol)

Model No. WL0F00101000JGDAESA02

►TFT Size: 10.1"
►TFT Resolution: 1024×600 dots
►TFT View Direction: IPS
►TFT Touch Screen: Capacitive Touch Panel
►Communication Interface: RS485
►Protocol: Modbus
►Brightness(cd/m²): 400

PDF DOWNLOAD

DEMO CODE

ADD TO INQUIRY

PREV. BACK to LIST

Description

WL0F00101000JGDAESA02 is a 10.1-inch Smart Display_RS485 series TFT module, designed as a slave device that communicates with a master device through RS485 commands to display content and return touch event data via Modbus protocol. It features WINSTAR’s TFT standard IPS wide-temperature display, WF101JTYAHLNB0, and a 4-layer FR4 PCBA with built-in firmware. This 10.1" RS485 series TFT provides an efficient solution for accelerating product development, leveraging the WINSTAR GUI Builder to minimize coding time and reduce overall development costs.

Key Features:

+12V power input with an 8V to 28V dynamic range and a power consumption of approximately 6W.
Self-testing functionality upon boot-up.
RS485 communication interface with Modbus protocol support.
32MB built-in flash memory for storing fonts and Object Dictionary Data.
Supports capacitive touch panel (CTP).
Embedded buzzer, controllable by the master device.
GPIO PIN support for extended functionality.
UI design without coding using WINSTAR GUI Builder (►GUI Builder User Guide).
Built on the STM32F series MCU, supporting STMicroelectronics' software development tools.
Extended memory management, including:
- Up to 255 objects per page (vs. 64 in the 16MB version).
- Up to 1000 total objects (vs. 500 in the 16MB version).
- Support for up to 64 pages (vs. 30 in the 16MB version).
- Dynamic memory allocation for efficient flash storage management.

WINSTAR 10.1-inch Smart Displays - 32MB FLASH Memory

WINSTAR's GUI Builder software, a Windows-only application, allows customers to design and simulate their GUI before deployment, utilizing drag-and-drop widgets for a WYSIWYG experience. The Smart Display app combines three application templates into one during the POST (Power-On Self Test), allowing users to choose the app they want by holding down the button for 3 seconds on first power-up. The three available templates are for industrial, vehicle, and medical applications. For further customization, users can switch between templates using the GUI Builder.

Try before you buy! Contact us to download WINSTAR GUI Builder application.

Smart Display products are designed with STMicroelectronics' (ST) controller which supports ST development tools like TouchGFX and STM32CubeIDE. You can also use ST tools to design WINSTAR Smart Display modules besides GUI Builder.

TouchGFX: An advanced free-of-charge graphic software framework optimized for STM32 microcontrollers.
STM32CubeIDE: An advanced C/C++ development platform with peripheral configuration, code generation, code compilation, and debug features for STM32 microcontrollers and microprocessors.
STM32CubeMX: A graphical tool that allows a very easy configuration of STM32 microcontrollers, as well as the generation of the corresponding initialization C code for the Arm® Cortex®-M core or a partial Linux® Device Tree for Arm® Cortex®-A core, through a step-by-step process.
STM32CubeProg: An all-in-one multi-OS software tool for programming STM32 products. It provides an easy-to-use and efficient environment for reading, writing and verifying device memory through both the debug interface (JTAG and SWD) and the bootloader interface (UART, USB DFU, I2C, SPI, and CAN).

If you have purchased a WINSTAR Smart Display and wish to develop it by TouchGFX, please contact us through our website to obtain the initial code.

We also provide demo set with all needed accessories for you to realize your GUI design on smart displays.

DRAWING

Block diagram

SPECIFICATIONS

General Specifications

Item	Standard Value	Unit
Operating voltage	8V~28V dynamic	Vdc
Communication Interface	RS485	-
MCU	STM32F746	N/A
Flash Memory	32	MB
LCD display size	10.1	inch
Dot Matrix	1024 x RGB x 600(TFT)	dots
Module dimension	248.8(W) x 143(H) x 23.2(D)	mm
Active area	222.72 (H) x 125.28(V)	mm
Pixel pitch	0.2175(W) x 0.2088(H)	mm
Brightness	Min: 300; Typ: 400	cd/m2
LCD type	TFT, Normally Black, Transmissive
View Direction	85/85/85/85
Aspect Ratio	16:9
Touch Panel	With Projected Capacitive Touch Panel (PCAP)
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage	VCC	－	8	12	28	V
Supply LCM current	I(mA)	－	－	550	－	mA

BOM

Item	Description
LCM	WF101JTYAHLNB0#
PCBA	SV10010R100JC00N0108

Interface Pin Function

CON1 definition

Pin	Symbol	Function	Remark
1	VIN	Power supply 8V to 28V input	Input
2	GND	Power supply GND input	Input
3	NC	-	-
4	NC	-	-
5	GND	Power supply GND input	GND
6	GND	Power supply GND input	GND
7	Reserve	USB_D-	Reserve
8	Reserve	USB_D+	Reserve
9	NC	-	-
10	Reserve	USART RX interface(Reserve)	Reserve
11	Reserve	USART TX interface(Reserve)	Reserve
12	GND	Power supply GND input	GND
13	VIN	Power supply 8V to 28V input	Input
14	485B	RS485 D-	I/O
15	485A	RS485 D+	I/O
16	GND	Power supply GND input	Input

CON2 definition

Pin	Symbol	Function	Remark
1	+3V3	3.3V power for JTAG interface	Output
2	SWCLK	CLK pin for JTAG interface	Input
3	GND	GND for JTAG interface	Output
4	SWDIO	Data pin for JTAG interface	I/O
5	NRST	Reset pin for JTAG interface	Input
6	GND	GND	Output
7	IO_8	IO_8 for system Resume from suspend (Reserve)	WKup,ADC,Timer,Event,I/O
8	REST	Reset (active Low) (Reserve)	I
9	IO_0	ADC,DAC,Timer,Event,I/O	PA5
10	IO_1	ADC,Timer,Event,I/O	PA6
11	IO_2	ADC,Timer,Event,I/O	PA7
12	IO_3	RST,Timer,Event,I/O	PA8
13	IO_4	RST,Timer,Event,I/O	PC13
14	IO_5	ADC,Timer,Event,I/O	PB11
15	IO_6	RST,Timer,Event,I/O	PA15
16	IO_7	RST,ADC,Event,I/O	PD11