0.69 inch OLED Display Module 96x16
Model No. WEO009616B
►Type: Graphic
►Structure: COG
►Size: 0.69 inch OLED Dispaly
►96 x 16 Dot Matrix
►IC:SSD1306
►3V Power supply
►1/16 duty
►Interface: I2C
►Display Color: White / Yellow
Description
WEO009616B model is a consumer-grade COG OLED display, diagonal size 0.69 inch, made of resolution 96x16 pixels. This 0.69 inch OLED Display module is built-in with SSD1306 IC; it supports the I2C interface, the supply voltage for logic 3V (VDD), the supply voltage for display 7.5V (VCC), the display with 50% Checkboard current is 5mA @7.5V VCC (typical value), driving duty 1/16.
This WEO009616B model is a small-size 0.69 inch COG OLED display that is ultra-thin, lightweight, and has low power consumption. It is very suitable for smart home applications, medical devices, portable devices, wearable devices, etc. It can be operated at temperatures from -30℃ to +70℃; its storage temperatures range from -30℃ to +70℃.WEO009616B module supports internal Charge Pump supply and external VCC supply.
DRAWING
SPECIFICATIONS
Interface Pin Function
No. | Symbol | Function |
---|---|---|
1 | C2N | C1P/C1N – Pin for charge pump capacitor; Connect to each other with a capacitor. C2P/C2N – Pin for charge pump capacitor; Connect to each other with a capacitor. |
2 | C2P | |
3 | C1P | |
4 | C1N | |
5 | VBAT | This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used. |
6 | NC | No connection |
7 | VSS | This is a ground pin. |
8 | VDD | Power supply pin for core logic operation. |
9 | RES# | This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation. |
10 | SCL | When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL. |
11 | SDA | |
12 | IREF | This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 30uA. When internal IREF is used, this pin should be kept NC. |
13 | VCOMH | The pin for COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. |
14 | VCC | This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used. |
Mechanical Data
Item | Dimension | Unit |
---|---|---|
Dot Matrix | 96 × 16 Dots | - |
Module dimension | 26.3 × 8.0 × 1.26 | mm |
Active Area | 17.26 × 3.18 | mm |
Pixel Size | 0.16 × 0.18 | mm |
Pixel Pitch | 0.18 × 0.20 | mm |
Display Mode | Passive Matrix | |
Display Color | Monochrome | |
Drive Duty | 1/16 Duty | |
IC | SSD1306 | |
Interface | I2C | |
Size | 0.69 inch |
Absolute Maximum Ratings
Parameter | Symbol | Min | Max | Unit |
---|---|---|---|---|
Supply Voltage for Logic | VDD | 0 | 4 | V |
Supply Voltage for Display | VCC | 0 | 16 | V |
Charge Pump Regulator Supply Voltage |
VBAT | 0 | 5 | V |
Operating Temperature | TOP | -30 | 70 | °C |
Storage Temperature | TSTG | -30 | 70 | °C |
Electronical Characteristics
DC Electrical Characteristics
Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage for Logic | VDD | - | 1.65 | 3.0 | 3.3 | V |
Supply Voltage for Display (Supplied Externally) |
VCC | - | 6.0 | 7.5 | 8.0 | V |
Charge Pump Regulator Supply Voltage | VBAT | - | 3.0 | - | 4.2 | V |
Charge Pump Output Voltage for Display (Generated by Internal DC/DC) | Charge Pump VCC |
- | 7.0 | 7.5 | - | V |
Input High Volt. | VIH | - | 0.8×VDD | - | VDD | V |
Input Low Volt. | VIL | - | 0 | - | 0.2×VDD | V |
Output High Volt. | VOH | - | 0.9×VDD | - | VDD | V |
Output Low Volt. | VOL | - | 0 | - | 0.1×VDD | V |
50% check Board operating Current (VCC Supplied Externally) |
ICC | - | - | 5 | 10 | mA |
50% check Board operating Current (VCC Generated by Internal DC/DC) | IBAT | - | 5 | 10 | mA |
Search keyword: 96x16 oled, oled 96x16, 0.69 oled, 0.69" oled, 0.69 inch oled, oled 0.69"