Home Productos Pantalla OLED Pantalla OLED Gráfico WEO009616B

Módulos Gráficos 96x16 COG OLED 0,69 pulgada

Modelo Nº WEO009616B

►Tipo: Gráfico
►Estructura: COG
►Tamaño : 0,69 pulgada
►Matriz de puntos 96 x 16
►IC:SSD1306
►Fuente de alimentación de 3V
►1/16 duty
►Interfaz : I2C
►Color de la pantalla: Blanco / Amarillo

Descripción

WEO009616B es un módulo gráficos COG OLED de 0,69 pulgadas que tiene una resolución de 96x16 píxeles. Está integrado con el controlador IC SSD1306 y admite interfaz I2C y fuente de alimentación de 3 V. Esta serie de módulo puede funcionar a temperaturas de -30 ℃ a +70 ℃ y su temperatura de almacenamiento oscila entre -30 ℃ y +70 ℃.

Este módulo es una pantalla OLED COG de tamaño pequeño ultradelgada, ligera y tiene un bajo consumo de energía. Es muy adecuada para aplicaciones de hogar inteligente, dispositivos médicos, dispositivos portátiles, dispositivos ponibles.

 

DIBUJO

0.69 inch OLED, 0.69 OLED Display, OLED 0.69 - WEO009616B

ESPECIFICACIONES

Función interfaz Pin

No. Símbolo Función
1 C2N C1P/C1N – Pin for charge pump capacitor; Connect to each other with a capacitor.
C2P/C2N – Pin for charge pump capacitor; Connect to each other with a capacitor.
2 C2P
3 C1P
4 C1N
5 VBAT This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
6 NC No connection
7 VSS This is a ground pin.
8 VDD Power supply pin for core logic operation.
9 RES# This pin is reset signal input. When the pin is low, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
10 SCL When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
11 SDA
12 IREF This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 30uA.
When internal IREF is used, this pin should be kept NC.
13 VCOMH The pin for COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
14 VCC This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.

Datos mecánicos

Elemento Dimensión Unidad
Matriz de puntos 96 × 16 puntos
Dimensión del módulo 26.3 × 8.0 × 1.26 mm
zona activa 17.26 × 3.18 mm
Tamaño del punto 0.16 × 0.18 mm
Distancia entre puntos 0.18 × 0.20 mm
Modo de visualización Matriz pasiva
Color de la pantalla Monocromos
Drive Duty 1/16 Duty
IC SSD1306
Interfaz I2C
Tamaño (Diagonal) 0.69 pulgada

Valores nominales máximos absolutos

Parameter Símbolo Min Max Unit
Supply Voltage for Logic VDD 0 4 V
Supply Voltage for Display VCC 0 16 V

Charge Pump Regulator Supply Voltage

VBAT 0 5 V
Temperatura de funcionamiento TOP -30 70 °C
Temperatura de almacenamiento TSTG -30 70 °C

Características electrónicas

DC Características electrónicas

Elemento Símbolo Condición Valor mín. Valor típico Valor máx. Unidad
Supply Voltage for Logic VDD 1.65 3.0 3.3 V
Supply Voltage for Display (Supplied Externally) VCC 6.0 7.5 8.0 V
Charge Pump Regulator Supply Voltage VBAT 3.0 4.2 V
Charge Pump Output Voltage for Display (Generated by Internal DC/DC) Charge Pump
VCC
7.0 7.5 V
Input High Volt. VIH 0.8×VDD VDD V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDD V
Output Low Volt. VOL 0 0.1×VDD V
50% check Board operating Current (VCC Supplied Externally) ICC 5 10 mA
50% check Board operating Current (VCC Generated by Internal DC/DC) IBAT   5 10 mA


Search keyword: 96x16 oled, oled 96x16, 0.69 oled, 0.69" oled, 0.69 pulgada oled, oled 0.69 pulgada
go top
close