0,69 Zoll 96x16 Grafik-OLED-Display
Modellnummer WEO009616B
►Typ: Grafik
►Bauweise: COG
►Größe: 0,69 Zoll OLED
►96 x 16 Punktmatrix
►IC：SSD1306
►3-V-Stromversorgung
►1/16 duty
►Schnittstelle: I2C
►die Farbe des Displays: Weiß / Gelb
►Geeignet für Tragbare Geräte
Beschreibung
Zeichnung
Technische Daten
Schnittstelle Pin-Funktion
| No. | Symbol | Beschreibung |
|---|---|---|
| 1 | C2N | C1P/C1N – Pin for charge pump capacitor; Connect to each other with a capacitor. C2P/C2N – Pin for charge pump capacitor; Connect to each other with a capacitor. |
| 2 | C2P | |
| 3 | C1P | |
| 4 | C1N | |
| 5 | VBAT | This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used. |
| 6 | NC | No connection |
| 7 | VSS | This is a ground pin. |
| 8 | VDD | Power supply pin for core logic operation. |
| 9 | RES# | This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation. |
| 10 | SCL | When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL. |
| 11 | SDA | |
| 12 | IREF | This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 30uA. When internal IREF is used, this pin should be kept NC. |
| 13 | VCOMH | The pin for COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. |
| 14 | VCC | This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used. |
mechanische Daten
| Artikel | Ausmaß | Einheit |
|---|---|---|
| Punktmatrix | 96 × 16 Punkte | － |
| Abmaße der modul | 26,3 × 8,0 × 1,26 | mm |
| Aktiver Bereich | 17,26 × 3,18 | mm |
| Punktgröße | 0,16 × 0,18 | mm |
| Punktabstand | 0,18 × 0,20 | mm |
| der Anzeigemodus | Passive Matrix | |
| die Farbe des Displays | Monochromes | |
| Drive Duty | 1/16 Duty | |
| IC | SSD1306 | |
| Schnittstelle | I2C | |
| Größe (Diagonale) | 0,69 Zoll | |
Absolute Grenzwerte
| Parameter | Symbol | Min | Mindestwert | Einheit |
|---|---|---|---|---|
| Supply Voltage for Logic | VDD | 0 | 4 | V |
| Supply Voltage for Display | VCC | 0 | 16 | V |
|
Charge Pump Regulator Supply Voltage |
VBAT | 0 | 5 | V |
| Betriebstemperatur | TOP | -30 | 70 | °C |
| Lagertemperatur | TSTG | -30 | 70 | °C |
elektronische Eingenschaften
DC elektronische Eingenschaften
| Artikel | Symbol | Bedingung | Mindestwert | typischer Wert | Maximalwert | Einheit |
|---|---|---|---|---|---|---|
| Supply Voltage for Logic | VDD | － | 1,65 | 3,0 | 3,3 | V |
| Supply Voltage for Display (Supplied Externally) |
VCC | － | 6,0 | 7,5 | 8,0 | V |
| Charge Pump Regulator Supply Voltage | VBAT | － | 3,0 | － | 4,2 | V |
| Charge Pump Output Voltage for Display (Generated by Internal DC/DC) | Charge Pump VCC |
－ | 7,0 | 7,5 | － | V |
| Input High Volt. | VIH | － | 0,8×VDD | － | VDD | V |
| Input Low Volt. | VIL | － | 0 | － | 0,2×VDD | V |
| Output High Volt. | VOH | － | 0,9×VDD | － | VDD | V |
| Output Low Volt. | VOL | － | 0 | － | 0,1×VDD | V |
| 50% check Board operating Current (VCC Supplied Externally) |
ICC | － | － | 5 | 10 | mA |
| 50% check Board operating Current (VCC Generated by Internal DC/DC) | IBAT | － | 5 | 10 | mA |
