Home Products TFT Display Transflective TFT LCD Displays WFN0240A2T0GADNN000

2.4-inch 240x320 Transflective TFT LCD Display

Model No. WFN0240A2T0GADNN000

►Size: 2.4"
►Resolution: 240×320 dots
►View Direction: 3H
►Interface: MCU/SPI+RGB
►Driver IC:ST7789
►Control-Board: No
►Brightness(cd/m²): 250
►Frame Through Hole: No
►Touch Screen: Without Touch Screen

Description

The WINSTAR WFN0240A2T0GADNN000 is a 2.4-inch transflective TFT-LCD module designed to deliver excellent visibility in both indoor and outdoor environments. With a resolution of 240×320 dots and ST7789 driver IC, this display ensures stable performance and easy integration into various systems. It supports multiple interfaces including MCU, SPI, and RGB, offering design flexibility for engineers. Featuring anti-glare surface treatment and an operating temperature range of -20℃ to +70℃, this module is an ideal choice for handheld devices, industrial controllers, and medical equipment where reliable readability and durability are required.

DRAWING

2.4-inch 240x320 Transflective TFT LCD Display - WFN0240A2T0GADNN000

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 2.4 inch
Dot Matrix 240 × RGB × 320(TFT) dots
Module dimension 42.72 × 60.26 × 2.63 mm
Active area 36.72 × 48.96 mm
Pixel Pitch 0.153 × 0.153 mm
LCD type TFT, Normally White, Transflective
Viewing Direction 3 O'clock
TFT Interface 8/9/16/18Bit MCU
3/4SPI+16/18Bit RGB
3-line/4-line Serial
Backlight Type LED, Normally White
TFT Driver IC ST7789 or Equivalent
Touch Panel Without Touch Panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Characteristics Symbol Min. Typ. Max. Unit
Digital Supply Voltage VCI 2.4 3.3 3.6 V
Supply Voltage (Logic) IOVCC 1.65 1.8 3.3 V
Normal mode Current consumption IDD -- 5 10 mA
Level input voltage VIH 0.7 IOVCC   IOVCC V
VIL GND   0.3 IOVCC V
Level output voltage VOH 0.8 IOVCC   IOVCC V
VOL GND   0.2 IOVCC V
 

LED driving conditions

Item Symbol Min. Typ. Max. Unit
LED current - - 80 - mA
LED voltage VLEDA 2.7 3.1 3.3 V
LED Life Time - 50,000 - - Hr

Interface Pin Function

LCM PIN Definition

Pin No Symbol Description I/O
1 NC No connection --
2 NC No connection --
3 NC No connection --
4 NC No connection --
5 GND Ground. P
6 GND Ground. P
7 VCC Supply voltage(3.3V). I
8 VCC Supply voltage(3.3V). I
9 IOVCC Power Supply for I/O System. I
10 SDO SPI interface output pin.
-The data is output on the falling edge of the SCL signal.
-If not used, let this pin open.
O
11-28 DB17-DB0 18-bit parallel bi-directional data bus for MCU system and RGB i
nterface mode. Fix to GND level when not in use
I/O
29 DIN(SDA) Serial input signal.
The data is latched on the rising edge of the SCL signal. fix this pin at IOVCC or GND when not in use.
I/O
30 PCLK Dot clock signal for RGB interface operation.
Fix this pin at IOVCC or GND when not in use.
I
31 DE Data enable signal for RGB interface operation.
fix this pin at IOVCC or GND when not in use.
I
32 HSYNC Line synchronizing signal for RGB interface operation.
fix this pin at IOVCC or GND when not in use.
I
33 VSYNC Frame synchronizing signal for RGB interface operation.
fix this pin at IOVCC or GND when not in use.
I
34 RD Read enable in 8080 MCU parallel interface.
-If not used, please fix this pin at IOVCC or DGND.
I
35 WR(SPI-RS) -Write enable in MCU parallel interface.
Display data/command selection pin in 4-line serial interface.
Second Data lane in 2 data lane serial interface.
-If not used, please fix this pin at IOVCC or DGND.
I
36 RS(SPI-SCL) -Display data/command selection pin in parallel interface.
-This pin is used to be serial interface clock. RS=’1’: display data or parameter.
RS=’0’: command data.
-If not used, please fix this pin at IOVCC or DGND.
I
37 CS Chip select input pin (“Low” enable).
fix this pin at IOVCC or GND when not in use.
I
38 RESET This signal will reset the device and must be applied to properly
initialize the chip.
I
39 IM0 18-bit parallel bi-directional data bus for MCU system and RGB
interface mode. Fix to GND level when not in use
I
40 IM1
41 IM2
42 NC No connection -
43 LEDA Anode pin of backlight P
44 NC No connection -
45 LEDK Cathode pin OF backlight P
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail