Home Products TFT LCD Wide Temperature TFT WF104GTWAMLNB0

Wide Temperature 10.4" LVDS TFT LCD Display with PCAP

Model No. WF104GTWAMLNB0

►Size : 10.4”
►Resolution : 1024 x 768 dots
►View Direction : IPS (80/80/80/80 min)
►Interface : LVDS
►Driver IC: --
►Control-Board : No
►Brightness (cd/m²): 400
►Frame Through Hole : No
►Touch Screen : Projected capacitive touch screen (PCAP)
►Detect Point : 2 Fingers
►Operating Temperature : -30~+80 °C (Wide Temperature)


WF104GTWAMLNB0 is a 10.4-inch Wide Temperature IPS TFT-LCD module with a Projected Capacitive Touch Panel. It has a resolution of 1024x768 pixels and supports an LVDS interface. WF104GTWAMLNB0 adopts an IPS panel, offering wider viewing angles of Left: 80° / Right: 80° / Up: 80° / Down: 80° (minimum), a contrast ratio of 1000:1 (typical), and a brightness of 400 nits (typical), with a glare surface panel and an aspect ratio of 4:3.

For customers requiring a High Brightness version, please choose WF104GSWAMLNB0.

The supply voltage (VDD) for WF104GTWAMLNB0 ranges from 3.0V to 3.6V, with a typical value of 3.3V. It can operate at temperatures ranging from -30°C to +80°C and can be stored within the same temperature range.

Customers who do not require a touch panel option can choose either module WF104GTWAMLNN0 or WF104GSWAMLNN0 (High Brightness version). As Mitsubishi has announced the cessation of TFT-LCD module manufacturing, customers can consider our WF104G series as a replacement for Mitsubishi's 10.4-inch displays.

Assembly Instructions: Please note that assembly requires the use of edge-measuring keyholes for fixing and support. Ensure proper alignment during installation to avoid misplacement.


Wide Temperature 10.4 LVDS TFT LCD Display with PCAP - WF104GTWAMLNB0



1.LCM PIN Definition (CON1)

Pin Symbol Function
1-2 VDD Power supply: + 3.3V
3-4 GND Ground
5 Link0- 0-  LVDS differential data input 
6 Link0+ 0+ LVDS differential data input 
7 GND Ground
8 Link1- 1-  LVDS differential data input
9 Link1+ 1+ LVDS differential data input
10 GND Ground
11 Link2- 2- LVDS differential data input 
12 Link2+ 2+ LVDS differential data input
13 GND Ground
14 CLKIN- - LVDS differential clock input
15 CLKIN+ + LVDS differential clock input
16 GND Ground
17 Link3- 3- LVDS differential data input
18 Link3+ 3+ LVDS differential data input 
19 MODE LVDS 6/8 bit select function control,
Low or NC →6bit Input Mode; High →8bit Input Mode
20 SC Scan direction selector (Low: Normal ;High: Reverse)


Pin Symbol Function
1-2 VLED 12V 12V input
3-4 GND Ground
5 BLEN Backlight ON-OFF
6 LED PWM Light Dimming Control (PWM) Input Voltage
(Low active)

3. CON3

Pin Symbol Function
1-3 NC No connection
4 Vss Power ground.
5-8 NC No connection
10 USB_D- D-
11 USB_D+ D+
12 USB_VDD 5V Power supply

General Specifications

Item Dimension Unit
Size 10.4 inch
Dot Matrix 1024 × RGB × 768 (TFT) dots
Module dimension 240.6 × 190.8 × 15.65 mm
Active area 210.432 × 157.824 mm
Pixel Pitch 0.2055 × 0.2055 mm
LCD type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80 min
Aspect Ratio 4:3
TFT Interface LVDS
Backlight Type LED, Normally White
PCAP IC ILI2511 or Equivalent
PCAP Interface USB
PCAP FW Version 0x06.0x00.0x00.0x00.0x00.0x00.0x00.0x00
PCAP Resolution 16384*16384
Touch Panel Projected capacitive touch screen (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Item Symbol Standard Value Unit
Min Typ Max
Power voltage VDD 3 3.3 3.6 V
Supply PCAP USB_VDD 5V 4.4 5 5.5 V
I VDD 5V 95 145 mA
Input logic high voltage VIH 0.7 VDD - VDD V
Input logic low voltage VIL 0 - 0.3 VDD V
Current for Power IVDD - 385 424 mA
go top