7 PCAP Touch Panel, Touch Panel Module, PCAP Display - WF70GTIAGDNGD

7" TFT PCAP Touch Panel Module / PCAP Touch Screen Display

Model No. WF70GTIAGDNGD

►Touch Panel Module, PCAP Display
►Size : 7 inch
►Resolution : 800 x 480 dots
►View Direction : 12H
►Interface : RGB
►Driver IC : HX8264+HX8664
►Control-Board : No
►Brightness (cd/m²): 350
►Frame Through Hole: No
►Touch Panel : PCAP Touch Screen / PCAP Touch Panel
►Detect Point : 5 Fingers

PDF DOWNLOAD

DEMO CODE ADD TO INQUIRY

PREV. BACK to LIST NEXT

DESCRIPTION

WF70GTIAGDNGD is 800x480 dots 7" TFT PCAP touch screen display module and it is easily controlled by MCU such as 8051, PIC, AVR, ARDUINO and ARM. It can be used in embedded systems, automation, GPS, medical equipment, industrial device, security equipment which requires TFT display in high quality and colorful image.

DRAWING

PCAP Touch Panel, PCAP Touch Screen, Touch Panel Module, PCAP Display 7 - WF70GTIAGDNGD

SPECIFICATIONS

Interface

LCM PIN Definition

Pin	Symbol	Function
1	A	Power supply for backlight
2	A	Power supply for backlight
3	K	Backlight ground
4	K	Backlight ground
5	GND	Power ground
6	VCOM	Common voltage
7	VCC	Power for Digital Circuit
8	MODE	DE/SYNC mode select
9	DE	Data Input Enable(DEN)
10	VS	Vertical Sync Input (VSD)
11	HS	Horizontal Sync Input(HSD)
12	B7	Blue data(MSB)
13	B6	Blue data
14	B5	Blue data
15	B4	Blue data
16	B3	Blue data
17	B2	Blue data
18	B1	Blue data
19	B0	Blue data(LSB)
20	G7	Green data(MSB)
21	G6	Green data
22	G5	Green data
23	G4	Green data
24	G3	Green data
25	G2	Green data
26	G1	Green data
27	G0	Green data(LSB)
28	R7	Red data(MSB)
29	R6	Red data
30	R5	Red data
31	R4	Red data
32	R3	Red data
33	R2	Red data
34	R1	Red data
35	R0	Red data(LSB)
36	GND	Power Ground
37	DCLK	Sample clock (CLKIN)
38	GND	Power Ground
39	L/R	Left / right selection
40	U/D	Up/down selection
41	VGH	Gate ON Voltage
42	VGL	Gate OFF Voltage
43	AVDD	Power for Analog Circuit
44	RESET	Global reset pin.
45	NC	No connection
46	VCOM	Common Voltage
47	DITHB	Dithering function
48	GND	Power Ground
49	NC	No connection
50	NC	No connection

I: input, O: output, P: Power

PCAP PIN Definition

Pin	Symbol	Function
1	VSS	Ground for analog circuit
2	VDDT	Power Supply : +3.3V
3	SCL	I2C clock input
4	NC	No connect
5	SDA	I2C data input and output
6	NC	No connect
7	/RST	External Reset, Low is active
8	NC	No connect
9	/INT	External interrupt to the host
10	VSS	Ground for analog circuit

General Specifications

Item	Dimension	Unit
Size	7.0	inch
Dot Matrix	800 × RGB × 480 (TFT)	dots
Module dimension	165.0(W) × 100(H) × 7.4(D)	mm
Active area	154.08 × 85.92	mm
Dot pitch	0.0642 × 0.179	mm
LCD type	TFT, Normally White, Transmissive
View Direction	12 o'clock
Gray Scale Inversion Direction	6 o'clock
Driver IC	HX8264+HX8664 or Equivalent
TFT Interface	24-bit RGB
Aspect Ratio	16:9
PCAP IC	ILI2130 or Equivalent
PCAP Interface	I2C
PCAP FW Version	0x07.0x00.0x00.0x00.0x65.0x90.0x00.0x01
PCAP Resolution	16384*16384
Backlight Type	LED, Normally White
Touch Screen	PCAP Touch Screen / PCAP Touch Panel
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Item	Symbol	Min	Typ	Max	Unit
Supply Voltage For Logic	VCC	3.0	3.3	3.6	V
Supply PCAP	VDDT	2.8	－	3.3	V
Supply PCAP	ICTP	－	65	98	mA
Power Supply For Current	VDD=3.3V		4	10	mA
Power Consumption	VDD=3.3V		13.2	36	mW
Power voltage	AVDD	10.2	10.4	10.6	V
Power voltage	VGH	15.3	16.0	16.7	V
Power voltage	VGL	-7.7	-7.0	-6.3	V
Input signal voltage	VCOM	2.6	(3.6)	4.6	V

Search keyword: tft 7, tft 7", 7 tft lcd, 7" tft lcd, 7 inch tft lcd, tft lcd 7, 7 tft display, 7" tft display, 7 inch tft display, tft display 7, tft display 7", 7.0 tft lcd