Home Products TFT LCD For HDMI Signal TFT LCD WF70A2TIFGDHGV

For Small HDMI Signal 7" Capacitive touch TFT LCD Display

Model No. WF70A2TIFGDHGV

►Size: 7"
►Resolution : 800x480 dots
►View Direction: 12H
►Interface: Support HDMI Connector (Only DVI Signal)
►Controller IC : TFP401
►Control-Board : Yes
►Brightness(cd/m2): 350
►Frame Through Hole: No
►Touch Screen : Projected Capacitive Touch Screen
►Detect Point (Fingers) : 1 / 2 / Option
►Operating Temperature : -20~70℃

Description

WF70A2TIFGDHGV is a 7 inch supporting HDMI (Only DVI) signal TFT-LCD module with Projected Capacitive Touch Panel (PCAP); it’s made of WVGA 800x480 resolution. WF70A2TIFGDHGV comes with a control board which supports HDMI signal interface and a 40-pin GPIO connector on board; it is designed to make Raspberry Pi usage become easily. This display has a USB interface Capacitive Touch Screen overlay on TFT panel. We designed a connector (P/N WWHDMI-00#) and USB cable (P/N OTP1XXXXXXXXXXXX0155) for option, the customers can use it to connect WF70A2TIFGDHGV module with your Raspberry Pi directly. Please note, this part no. WF70A2TIFGDHGV does not include any HDMI connector or USB cable.

WF70A2TIFGDHGV is built in with TFP401 Controller IC convert signal to support HDMI (Only DVI) signal interface, as to the PCAP (CTP) IC is ILI2130, it supports USB interface. The supply voltage for LCM (VDD) is typical value 5V. It is featured with Glare surface glass, view direction 12 o'clock, gray scale inversion 6 o'clock.

Part No. WWHDMI-00

Part No. WWHDMI-00# (Optional component)
▪Support HDMI connector (Only DVI Signal) for TFT module and Raspberry Pi

WF70A2TIFGDHGV#: with a 40-pin header connector on board, supports up to Raspberry Raspberry Pi 3B+ (contain Pi 4B) version.  If customers choose Raspberry Pi 4 version, please note the interface is Micro HDMI; customers need to use the Micro HDMI to HDMI cable for Winstar this series products.
WF70A2TIFGDHG0#: without connector on board(do not support Raspberry Pi).

 

DRAWING

WF70A2TIFGDHGV

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 7.0 inch
Dot Matrix 800 × RGB × 480(TFT) dots
Module dimension 165.0(W) × 100(H) × 26.6(D) mm
Active area 154.08 × 85.92 mm
Dot pitch 0.0642 × 0.179 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Controller IC TFP401 or equivalent
Backlight Type LED, Normally White
Interface Support HDMI Connector (Only DVI Signal)
PCAP IC ILI2130 or Equivalent
PCAP Interface USB
PCAP FW Version 0x07.0x00.0x00.0x00.0x65.0x90.0x00.0x01
PCAP Resolution 16384*16384
Touch Panel With PCAP
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 4.9 5 5.1 V
Supply Current For LCM IDD 830 1250 mA
LED Life Time 50,000 Hr

Interface

1. LCM PIN Definition(CON6)

Pin Symbol Function Remark
1 NC No connection  
2 5V Raspberry Pi:Power 5V  
3 GPIO02 Raspberry Pi:GPIO02  
4 5V Raspberry Pi:Power 5V  
5 GPIO03 Raspberry Pi:GPIO03  
6 GND Raspberry Pi:GND  
7 GPIO04 Raspberry Pi:GPIO04  
8 GPIO14 Raspberry Pi:GPIO14  
9 GND Raspberry Pi:GND  
10 GPIO15 Raspberry Pi:GPIO15  
11 GPIO17 Raspberry Pi:GPIO17  
12 GPIO18 Raspberry Pi:GPIO18 (Backlight Enable)  
13 GPIO27 Raspberry Pi:GPIO27  
14 GND Raspberry Pi:GND  
15 GPIO22 Raspberry Pi:GPIO22  
16 GPIO23 Raspberry Pi:GPIO23  
17 NC No connection  
18 GPIO24 Raspberry Pi:GPIO24  
19 GPIO10 Raspberry Pi:GPIO10  
20 GND Raspberry Pi:GND  
21 GPIO09 Raspberry Pi:GPIO09  
22 GPIO25 Raspberry Pi:GPIO25  
23 GPIO11 Raspberry Pi:GPIO11  
24 GPIO08 Raspberry Pi:GPIO08  
25 GND Raspberry Pi:GND  
26 GPIO07 Raspberry Pi:GPIO07  
27 ID_SD Raspberry Pi:ID_SD  
28 ID_SC Raspberry Pi:ID_SC  
29 GPIO05 Raspberry Pi:GPIO05  
30 GND Raspberry Pi:GND  
31 GPIO06 Raspberry Pi:GPIO06  
32 GPIO12 Raspberry Pi:GPIO12  
33 GPIO13 Raspberry Pi:GPIO13  
34 GND Raspberry Pi:GND  
35 GPIO19 Raspberry Pi:GPIO19  
36 GPIO16 Raspberry Pi:GPIO16  
37 GPIO26 Raspberry Pi:GPIO26  
38 GPIO20 Raspberry Pi:GPIO20  
39 GND Raspberry Pi:GND  
40 GPIO21 Raspberry Pi:GPIO21  
 

2.LCM PIN Definition (CON5)

Pin Symbol Function Remark
1 3.3V TFT Module Power limit can only output 3.3V,100mA Note1
2 5V Raspberry Pi:Power 5V  
3 GPIO02 Raspberry Pi:GPIO02  
4 5V Raspberry Pi:Power 5V  
5 GPIO03 Raspberry Pi:GPIO03  
6 GND Raspberry Pi:GND  
7 GPIO04 Raspberry Pi:GPIO04  
8 GPIO14 Raspberry Pi:GPIO14  
9 GND Raspberry Pi:GND  
10 GPIO15 Raspberry Pi:GPIO15  
11 GPIO17 Raspberry Pi:GPIO17  
12 GPIO18 Raspberry Pi:GPIO18 (Backlight Enable)  
13 GPIO27 Raspberry Pi:GPIO27  
14 GND Raspberry Pi:GND  
15 GPIO22 Raspberry Pi:GPIO22  
16 GPIO23 Raspberry Pi:GPIO23  
17 3.3V TFT Module Power limit can only output 3.3V,100mA Note1
18 GPIO24 Raspberry Pi:GPIO24  
19 GPIO10 Raspberry Pi:GPIO10  
20 GND Raspberry Pi:GND  
21 GPIO09 Raspberry Pi:GPIO09  
22 GPIO25 Raspberry Pi:GPIO25  
23 GPIO11 Raspberry Pi:GPIO11  
24 GPIO08 Raspberry Pi:GPIO08  
25 GND Raspberry Pi:GND  
26 GPIO07 Raspberry Pi:GPIO07  
27 ID_SD Raspberry Pi:ID_SD  
28 ID_SC Raspberry Pi:ID_SC  
29 GPIO05 Raspberry Pi:GPIO05  
30 GND Raspberry Pi:GND  
31 GPIO06 Raspberry Pi:GPIO06  
32 GPIO12 Raspberry Pi:GPIO12  
33 GPIO13 Raspberry Pi:GPIO13  
34 GND Raspberry Pi:GND  
35 GPIO19 Raspberry Pi:GPIO19  
36 GPIO16 Raspberry Pi:GPIO16  
37 GPIO26 Raspberry Pi:GPIO26  
38 GPIO20 Raspberry Pi:GPIO20  
39 GND Raspberry Pi:GND  
40 GPIO21 Raspberry Pi:GPIO21  
Note1: The 3.3V supply current is limited; please pay special attention to use  

3. DVI

Pin No. Symbol I/O Function Remark
1 Rx2+ I +LVDS Differential Data Input  
2 GND P Ground  
3 Rx2- I -LVDS Differential Data Input  
4 Rx1+ I +LVDS Differential Data Input  
5 GND P Ground  
6 Rx1- I -LVDS Differential Data Input  
7 Rx0+ I +LVDS Differential Data Input  
8 GND P Ground  
9 Rx0- I -LVDS Differential Data Input  
10 RxC+ I +LVDS Differential Clock Input  
11 GND P Ground  
12 RxC- I -LVDS Differential Clock Input  
13-14 NC - No connection  
15 SCL I/O DDC(Data Display Channel) Clock  
16 SDA I/O DDC(Data Display Channel) Data  
17 GND P Ground  
18 5V P Power Supply  
19 Detect I/O Hot plug detect  
I: input, O: output, P: Power

4.USB

Pin No. Symbol I/O Function Remark
1 5V P Power Supply  
2 D- I/O USB Data -  
3 D+ I/O USB Data +  
4 NC - No connection  
5 GND P Ground  
 

5.POWER JACK

Pin No. Symbol I/O Function Remark
1 5V P Power Supply (5V)  
2 GND P Ground  
3 NC   No connection  
*Display need to use power jack to power on due to HDMI port not able to fulfill the supply current

Search keyword: tft 7, tft 7", 7 tft lcd, 7" tft lcd, 7 inch tft lcd, tft lcd 7, 7 tft display, 7" tft display, 7 inch tft display, tft display 7, tft display 7", 7"tft

go top
close