Model No. WF57A2TIBCDBT0
►5.7" Touch Screen TFT LCD Display
►Resolution : 320 x 240 dots
►View Direction : 12H
►Interface : MCU
►Controller IC：SSD1963
►Control-Board : Yes
►Brightness (cd/m²) : 600
►Frame Through Hole : Yes
►Touch Screen : Resistive Touch Panel (RTP)
►O-Film: Option
WF57A2TIBCDBT0 is a 5.7-inch TFT LCD display module with a Controller Board, featuring a built-in SSD1963 controller IC and a resistive touch panel (RTP). The module offers a 320×240 pixel resolution with a typical brightness of 600 nits, making it suitable for a wide range of applications, including various industrial control system display equipment. The display supports a 36-pin 8080 MPU interface, and an 8/16-bit 6800 interface can be selected via jumper settings.
The module has an outline dimension of 141.12 × 101.55 mm and an active area of 115.2 × 86.4 mm. The operating voltage is 3.0V to 3.3V, with a typical value of 3.1V. It can operate in temperatures ranging from -20°C to +70°C, with storage temperatures from -30°C to +80°C. The backlight supply is provided via pins 33 to 36, simplifying the design by eliminating the need for an additional backlight circuit.
This module also includes a 4-screw-hole frame for easy mounting and features a 12 o'clock viewing direction, 6 o'clock gray scale inversion, and a 4:3 aspect ratio, ensuring optimal visibility and touch functionality in a variety of environments.
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.7 | inch |
| Dot Matrix | 320 × RGB × 240(TFT) | dots |
| Module dimension | 141.12 × 101.55 × 15.0 | mm |
| Active area | 115.2 × 86.4 | mm |
| Dot pitch | 0.12 × 0.36 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| Aspect Ratio | 4:3 | |
| Backlight Type | LED ,Normally White | |
| Controller IC | SSD1963 | |
| Interface | Digital 8080 family MPU 8bit/16bit | |
| Touch Panel | Resistive touch panel (RTP) | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For LCM | VDD | － | 3.0 | 3.1 | 3.3 | V |
| Supply Current For LCM | IDD | － | － | 400 | 600 | mA |
| Pin | Symbol | Function |
|---|---|---|
| 1 | GND | System ground pin of the IC . Connect to system ground. |
| 2 | VDD | Power Supply : +3.3V |
| 3 | BLE | Backlight control signal , H: On \ L: Off |
| 4 | D/C | Data/Command select |
| 5 | WR | Write strobe signal |
| 6 | RD | Read strobe signal |
| 7~14 | DB0~DB7 | Data bus |
| 15~22 | DB8~DB15 | Data bus (When select 8bits Mode, this pin is NC) |
| 23~24 | NC | No connect |
| 25 | CS | Chip select |
| 26 | RESET | Hardware reset |
| 27 | L/R | Left / right selection; Default L/R=H |
| 28 | U/D | Up/down selection; ; Default U/D=L |
| 29 | XL | Left electrode |
| 30 | YU | Top electrode |
| 31 | XR | Right electrode |
| 32 | YD | Bottom electrode |
| 33~34 | VLED- | Power for LED Driver IC(GND) |
| 35~36 | VLED+ | Power for LED Driver IC(+5V) |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
