Home Products TFT LCD TFT Panel + Controller Board WF57A2TIBCDBG0

TFT 320x240 Color Display with LCD Controller Board

Model No. WF57A2TIBCDBG0

►Size : 5.7 inch
►Resolution : 320 x 240 dots
►View Direction : 12H
►Interface : MCU
►Controller IC:SSD1963
►Control-Board : Yes
►Brightness(cd/m²): 700
►Frame Through Hole: Yes
►Touch Screen : Projected capacitive Touch Panel (PCAP)
►Detect Point : 5 Fingers
►O-Film : Option

Description

Winstar TFT LCD 320x240, 320x240 TFT Color Display

The WF57A2TIBCDBG0 is TFT 320x240 Display with SSD1963 controller board plus a 36 pin-out connector on board. This model is featured with 8 bit or 16 bit options and already defined pin no. 33 ~ 36 as backlight supply; therefore, there is no need to design extra backlight circuit. The WF57A2TIBCDBG0 display is having the module dimension of 141.12 x 101.55 mm and includes a Projected Capacitive Touch Panel (PCAP) on module.

DRAWING

TFT 320x240 Color Display, TFT LCD 320x240 with LCD Controller Board - WF57A2TIBCDBG0

SPECIFICATIONS

Interface

Pin Symbol Function
1 GND System ground pin of the IC . Connect to system ground.
2 VDD Power Supply : +3.3V
3 BLE Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23 NC No connect
24 CTP_INT CTP_ External interrupt to the host
25 CS Chip select
26 RESET Hardware reset
27 LR Left / right selection; Default L/R=H
28 UD Up/down selection; ; Default U/D=L
29 CTP_SCL CTP_SPI Slave mode, chip select, active low / I2C clock input
30 CTP_SDA CTP_ SPI Slave mode, data input / I2C data input and output
31 CTP_RST CTP_ External Reset, Low is active
32 NC No connect
33~34 VLED- Power for LED Driver IC(GND)
35~36 VLED+ Power for LED Driver IC(+5V)

General Specifications

Item Dimension Unit
Size 5.7 inch
Dot Matrix 320 × RGB × 240(TFT) dots
Module dimension 141.12 × 101.55 × 15.24 mm
Active area 115.2 × 86.4 mm
Dot pitch 0.12 × 0.36 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 4:3
Backlight Type LED, Normally White
Controller IC SSD1963 or Equivalent
TFT Interface Digital 8080 family MPU  8bit/16bit
PCAP FW Version 0x07.0x00.0x00.0x00.0xA2.0x01.0x57.0x00
PCAP IC ILI2130 or equivalent
PCAP Interface I2C
PCAP Resolution 16384*16384
Touch Panel Projected capacitive touch panel (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 480 720 mA

Search keyword: tft 5.7, tft 5.7", 5.7 tft lcd, 5.7" tft lcd, 5.7 inch tft lcd, tft lcd 5.7, 5.7 tft display, 5.7" tft display, 5.7 inch tft display, tft display 5.7, tft display 5.7"
go top
close