Home Products TFT LCD Bar Type TFT LCD WF52QTZBSDBN0

5.2" Bar LCD Display

Model No. WF52QTZBSDBN0

►Size : 5.2”
►Resolution : 480 x 128 dots
►View Direction : 6H
►Interface : 8080, MPU
►Built-in Controller : SSD1963
►Control-Board : Yes
►Brightness (cd/m²): 400
►Frame Through Hole : Yes
►Touch Screen : Without touch screen
►O-Film : Yes

DRAWING

SPECIFICATIONS

Interface

LCM PIN Definition (CON4)
Pin Symbol Function
1 GND System round pin of the IC.   Connect to system ground. 
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits mode, this pin is NC)
23~24 NC No connect
25 CS Chip select
26 RESET Hardware reset
27 LR Right /Left selection; Default R/L is Pull High
28 UD Up/down selection; Default U/D is Pull High
29~32 NC No connection
33 VLED- VLED- for B/L LED inverter (GND)
34 VLED- VLED- for B/L LED inverter (GND)
35 VLED+ VLED+ for B/L LED inverter (+5V)
36 VLED+ VLED+ for B/L LED inverter (+5V)

LCM PIN Definition (CON1)
Pin Symbol Function
1 NC(FG) No connect (Frame Grand)
2 GND System round pin of the IC.    Connect to system ground.
3 VDD Power Supply : +3.3V
4 BLE Backlight control signal , H: On \ L: Off
5 WR Write strobe signal
6 RD Read strobe signal
7 CS Chip select
8 D/C Data/Command select
9 NC No connect
10 RESET Hardware reset
11~18 DB0~DB7 Data bus
19~20 NC No connect 
21 VLED+ VLED+ for B/L  LED inverter   (+5V)
22 VLED- VLED- for B/L  LED inverter  (GND)
23~25 NC No connect
26 GND Hardware reset

General Specifications

Item Dimension Unit
Size 5.2 inch
Dot Matrix 480 × RGB × 128 dots
Module dimension 180.0 × 65.0 × 8.8 mm
Active area 127.152 × 33.9072 mm
Dot pitch 0.0883 × 0.2649 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Aspect Ratio Bar Type
Backlight Type LED, Normally White
Driver IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
With /Without TP Without touch panel (screen)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 200 mA

Search keyword: tft 5.2, tft 5.2", 5.2 tft lcd, 5.2" tft lcd, 5.2 inch tft lcd, tft lcd 5.2, 5.2 tft display, 5.2" tft display, 5.2 inch tft display, tft display 5.2, tft display 5.2",bar type tft
go top
close