Home Products OLED Module Graphic OLED Display WEA012864AE

1.54 inch COG OLED Graphic 128x64 with PCB

Model No. WEA012864AE

►Type: Graphic
►Structure: COG+PCB
►Size: 1.54 inch
►128 x 64 Dot Matrix
►IC:CH1116
►3V Power supply
►1/64 duty
►Interface: 4-wire SPI
►Display Color: White / Yellow

Description

WEA012864AE is a graphic COG with a PCB OLED module with a resolution of 128x64 pixels and a diagonal size of 1.54 inches. WEA012864AE is built-in with CH1116 driver IC; it supports a 4-wire SPI interface with 1/64 driving duty.

The module can work within a temperature range of -40°C to +80°C; its storage temperature range is from -40°C to +85℃. WEA012864AE is a good fit for applications such as smart home appliances, medical equipment, industrial dashboards, etc.

DRAWING

1.54 inch COG OLED Graphic 128x64 with PCB - WEA012864AE

Data source ref: WEA012864AEWAP3N00000

SPECIFICATIONS

Interface Pin Function

No. Symbol Function
1 GND Ground
2 VCC Power supply input
3 D0 The serial clock input
4 D1 The serial data input
5 RES# This is a reset signal input pad. When RES# is set to "L", the settings are initialized. The reset operation is performed by the RES# signal level.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
D/C# ="H":the input at D1 is treated as display data
D/C# ="L":the input at D1 is transferred to the command registers.
7 CS# This pad is the chip select input. When CS# ="L", then the chip select becomes active, and data/command I/O is enabled.

Mechanical Data

Item Dimension Unit
Dot Matrix 128 × 64 -
Module dimension 42.4 x 38.0 x 5.36 (MAX) mm
Active Area 35.05 × 17.51 mm
Pixel Size 0.249 × 0.249 mm
Pixel Pitch 0.274 × 0.274 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/64 Duty
IC CH1116
Interface 4-wire SPI
Size 1.54 inch

Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Supply Voltage for Display VCC 0 7 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

Electronical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage for Logic VCC 2.8 3.0 5.5 V
High Level Input VIH 0.8×VCC - VCC V
Low Level Input VIL VSS - 0.2×VCC V
High Level Output VOH 0.8×VCC - VCC V
Low Level Output VOL VSS - 0.2×VCC V
Display 50% Pixel on ICC VCC =3.0V - 60 120 mA
go top
close