Home Prodotti Display OLED Display OLED Grafici WEA012864AE

1.54 pollici COG+PCB 128x64 Display OLED Grafici

Modello numero WEA012864AE

►Tipo: grafico
►Struttura: COG+PCB
►Dimensione: 1.54 pollici
►128 x 64 a matrice di punti
►IC:CH1116
►Alimentatore 3V
►1/64 duty
►IInterfaccia: 4-wire SPI
►Colore display: Bianco / Giallo

DISEGNO

1.54 inch COG OLED Graphic 128x64 with PCB - WEA012864AE

Data source ref: WEA012864AEWAP3N00000

SPECIFICHE TECNICHE

Funzione dei Pin di Interfaccia

No. Simbolo Funzione
1 GND Ground
2 VCC Power supply input
3 D0 The serial clock input
4 D1 The serial data input
5 RES# This is a reset signal input pad. When RES# is set to "L", the settings are initialized. The reset operation is performed by the RES# signal level.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
D/C# ="H":the input at D1 is treated as display data
D/C# ="L":the input at D1 is transferred to the command registers.
7 CS# This pad is the chip select input. When CS# ="L", then the chip select becomes active, and data/command I/O is enabled.

Dati meccanici

Articolo Dimensioni Unità
A matrice di punti 128 × 64 -
Dimensione del modulo 42.4 x 38.0 x 5.36 (MAX) mm
Area attiva(AA) 35.05 × 17.51 mm
Dimensioni del Dot 0.249 × 0.249 mm
Passo del Dot 0.274 × 0.274 mm
Modalità display Matrice passiva
Colore display Monocromatici
Drive Duty 1/64 Duty
IC CH1116
Interfaccia 4-wire SPI
Dimensione (Diagonale) 1.54 pollici

Valori massimi assoluti

Parameter Simbolo Valore Min Valore massimo Unità
Supply Voltage for Display VCC 0 7 V
Temperatura di lavoro TOP -40 +80 °C
Temperatura di stock TSTG -40 +85 °C

Caratteristiche elettriche

Articolo Simbolo Condizione Valore Min Valore tipico Valore massimo Unità
Supply Voltage for Logic VCC 2.8 3.0 5.5 V
High Level Input VIH 0.8×VCC - VCC V
Low Level Input VIL VSS - 0.2×VCC V
High Level Output VOH 0.8×VCC - VCC V
Low Level Output VOL VSS - 0.2×VCC V
Display 50% Pixel on ICC VCC =3.0V - 60 120 mA
go top
close