Home Products TFT Display Transflective TFT LCD Displays WFN0200A2T07ADNN000

2-inch TFT LCD Display with IPS Transflective Screen

Model No. WFN0200A2T07ADNN000

►Size: 2"
►Resolution: 240×320 dots
►View Direction: IPS
►Interface: MCU/SPI+RGB
►Driver IC:ST7789
►Control-Board: No
►Brightness(cd/m²): 260
►Frame Through Hole: No
►Touch Screen: Without Touch Screen

Description

The WFN0200A2T07ADNN000 adopts an advanced transflective screen technology that combines both transmissive and reflective display modes, significantly enhancing visibility under varying lighting conditions. With a 2-inch portrait layout and IPS wide viewing angle, this module is ideal for outdoor and portable device applications.

Key Technical Features

 
  • Dual Display Technology
    This module utilizes a transflective screen, merging transmissive and reflective display modes to ensure excellent visibility in both indoor and outdoor environments. The IPS mode offers a wide 80/80/80/80° viewing angle, while the reflective mode remains readable under direct sunlight 45/45/45/45°. This design significantly improves display performance and adaptability, making it suitable for outdoor displays and in-vehicle instrumentation.
  • Versatile Interfaces
    Supports 3/4-wire serial, 8/9/16/18-bit MCU, and SPI + RGB hybrid interfaces for seamless integration with various control platforms.
  • Driver IC
    Equipped with the reliable and widely adopted ST7789 driver IC, simplifying the development process.
  • Brightness & Contrast
    260 cd/m² brightness with a 250:1 contrast ratio, suitable for general indoor/outdoor viewing needs. The reflective design further optimizes outdoor readability.
  • Wide Temperature Support
    Operating temperature range of -20~70°C, ideal for industrial and portable use cases.
  • Power & Lifetime
    Digital supply voltage range: 2.5~3.6V; interface voltage: 1.65~3.3V. LED lifetime up to 50,000 hours ensures long-term stability and reliability.
 

Recommended Applications

 
  • Outdoor information displays and industrial control panels
  • Wearable devices and handheld GPS units
  • Portable medical and measuring instruments requiring small-sized displays

DRAWING

Transflective Screen, 2-inch TFT LCD Display with IPS Transflective Screen - WFN0200A2T07ADNN000

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 2 inch
Dot Matrix 240 × RGB × 320(TFT) dots
Module dimension 35.8 × 52.1 × 2.65 mm
Active area 30.60 × 40.80 mm
Pixel Pitch 0.1275 × 0.1275 mm
LCD type TFT, Normally Black, Transmissive
Viewing angle 80/80/80/80
TFT Interface 3/4serial 8/9/16/18bit MCU
3/4SPI+16/18BIT RGB
Backlight Type LED, Normally White
TFT Driver IC ST7789 or Equivalent
Touch Panel Without Touch Panel
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Characteristics Symbol Min. Typ. Max. Unit
Digital Supply Voltage VCI 2.5 3.3 3.6 V
Digital interface supple Voltage IOVCC 1.65 1.8 3.3 V
Normal mode Current consumption IDD -- 6 12 mA
Level input voltage VIH 0.7IOVCC   IOVCC V
VIL GND   0.3IOVCC V
Level output voltage VOH 0.8IOVCC   IOVCC V
VOL GND   0.2IOVCC V
 

LED driving conditions

Item Symbol Min. Typ. Max. Unit
LED current - 60 80 - mA
LED voltage VLED+ 2.8 3.2 3.3 V
LED Life Time - 50,000 - - Hr

Interface Pin Function

LCM PIN Definition

Pin No Symbol Description I/O
1 GND Ground. P
2 VCI Supply voltage (3.3V). P
3 IOVCC Supply voltage (1.65-3.3V). P
4 IM2 MPU Parallel interface bus and serial interface select If use RGB Interface must select serial interface.
Fix this pin at IOVCC and GND.
  I
5 IM1
6 IM0
7 RESET This signal will reset the device and must be applied to properly
initialize the chip.
I
8 CS Chip select input pin (“Low” enable).
fix this pin at GND when not in use.
I
9 DC(SPI-SCL) -Display data/command selection pin in parallel interface.
-This pin is used to be serial interface clock. DC=’1’: display data or parameter.
DC=’0’: command data.
-If not used, please fix this pin at GND.
I
10 WR(SPI-RS) -Write enable in MCU parallel interface.
Display data/command selection pin in 4-line serial interface.
Second Data lane in 2 data lane serial interface.
-If not used, please fix this pin at GND.
I
11 RD Serves as a read signal and MCU read data at the rising edge.
fix this pin at IOVCC or GND when not in use.
I
12 VSYNC Frame synchronizing signal for RGB interface operation.
fix this pin at    GND when not in use.
I
13 HSYNC Line synchronizing signal for RGB interface operation.
fix this pin at GND when not in use.
I
14 ENABLE Data enable signal for RGB interface operation.
fix this pin at GND when not in use.
I
15 DOTCLK Dot clock signal for RGB interface operation.
Fix this pin at GND when not in use.
I
16 SDA Serial input signal.
The data is latched on the rising edge of the SCL signal. fix this pin at GND when not in use.
I
17-34 DB0-DB17 18-bit parallel bi-directional data bus for MCU system and RGB
interface mode .
Fix to GND level when not in use
I/0
35 SDO SPI interface output pin.
-The data is output on the falling edge of the SCL signal.
-If not used, let this pin open.
O
36 LEDA Anode pin of backlight P
37 LEDK1 Cathode pin OF backlight P
38 LEDK2 Cathode pin OF backlight P
39 LEDK3 Cathode pin OF backlight P
40 LEDK4 Cathode pin OF backlight P
41 XR(NC) Touch panel Right Glass Terminal A/D
42 YU(NC) Touch panel Top Film Terminal A/D
43 XL(NC) Touch panel LEFT Glass Terminal A/D
44 YD(NC) Touch panel Bottom Film Terminal A/D
45 GND Ground. P
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail