Home Products TFT Display Monochrome TFT LCD WF35NTVAJDNN0

3.5" Wide Temperature Mono TFT LCD

Model No. WF35NTVAJDNN0

►Mono TFT LCD
►Size : 3.5"
►Resolution : 240×320 dots
►View Direction : Wide View
►Interface : MCU
►Driver IC : ST7511
►Control-Board : No
►Brightness(cd/m2) : 500
►Frame Through Hole : No
►Touch Screen : No
►Operating Temperature : -30~80

Description

The WINSTAR WF35N is a graphic TFT LCD display with a diagonal of 3.5" and a resolution of 240 x 320 mono TFT Display. This is a monochrome model, but applied in the active matrix TFT; which allows for high contrast (900:1) and short response time.

Mono TFT models are featured with very high contrast while comparing with the monochrome STN displays. The DFSTN displays have the good black background with white character performance, but you might find the purplish background phenomenon.

The monochrome TFT display is a very good solution instead to replace the DFSTN. It has high contrast ratio, wide viewing angle, and built in controller with MCU interface; so the customer can use regular micro processor to drive it. Most importantly, the price for some modules is better than STN.

DRAWING

3.5 inch Wide Temperature Mono TFT LCD - WF35NTVAJDNN0

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 3.5 inch
Dot Matrix 240 × 320 dots
Module dimension 62.9 × 86.54 × 4.1 mm
Active area 53.28 × 71.04 mm
Dot pitch 0.222 × 0. 222 mm
LCD type TFT, Normally Black, Transmissive
View Direction Wide View
Aspect Ratio Portrait
Gray Scale 16 Gray scale (4BPP)/ 4 Gray scale (2BPP)/ 2 Gray scale (1BPP)
Driver IC ST7511
Backlight Type LED, Normally White
Touch Panel Without touch panel
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.3 3.6 V
Supply Current For LCM IDD 13 mA
Power Consumption 46.8 mW

Interface

Pin Symbol Function
1 GND System ground
2 VDD Power Supply : +3.3V
3 NC No connect
4 A0 Data/Command select
5 /WR(R/W) Write strobe signal
6 /RD(E) Read strobe signal
7 DB0 Data bus
8 DB1 Data bus
9 DB2 Data bus
10 DB3 Data bus
11 DB4 Data bus
12 DB5 Data bus
13 DB6 Data bus
14 DB7 Data bus
15 /CS Chip select
16 /RESET(RSTB) Hardware reset
17 IF0 Mode select
Setting MCU Type Interface Pin Function
IF1 IF0 CSB A0 RWR ERD D[7:0]
L L Parallel 8080 series MCU CSB A0 /WR /RD D[7:0]
L H Parallel 6800 series MCU R/W E
H H Serial 4-Line series MCU - - D7=SCL, D0=SDA, D[6:1] are not used
 
18 IF1
19 A LED +
20 K LED -
21 NC No connect
22 NC No connect
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail