Home Products TFT LCD IPS TFT LCD WF80GSYAUMNT0

800x1280 8-inch TFT Touchscreen Display (RTP)

Model No. WF80GSYAUMNT0

►Size : 8"
►Resolution : 800×1280 dots
►View Direction : IPS
►Interface : MIPI DSI
►Driver IC:ILI9881C
►Control-Board :No
►Brightness (cd/m²) : 750
►Frame Through Hole : No
►Touch Screen : Resistive Touch Panel (RTP)

Description

The WF80GSYAUMNT0 is an 8-inch vertical screen TFT-LCD display module with a resistive touch panel. It features a resolution of 800×1280 pixels, a high brightness of 750 nits (typical value), and a contrast ratio of 1500:1 (typical value). This TFT module supports the 4-Lanes MIPI DSI interface, offering advantages such as low power consumption, a high transmission rate, support for multiple data-encoding formats, and low noise and interference.

The WF80GSYAUMNT0 module utilizes IPS panel technology, providing relatively wide viewing angles of left: 85/right: 85/up: 85/down: 85 degrees (typical value). It incorporates an anti-glare surface with an aspect ratio of 10:16.

The display is integrated with the ILI9881C driver IC. The analog circuit of the power supply operates within the range of 3.0V~3.6V, with a typical value of 3.3V. Operating temperatures range from -20℃ to +70℃, and storage temperatures range from -30℃ to +80℃. The WF80GSYAUMNT0 8-inch display finds wide applications, especially in vertical screen orientations suitable for vending machines, ship control panels, home surveillance systems, and smart door locks.

The WF80GSYAUMNT0 8-inch display finds wide applications, especially in vertical screen orientations suitable for vending machines, ship control panels, home surveillance systems, and smart door locks.

DRAWING

800x1280 8-inch TFT Touchscreen Display (RTP) - WF80GSYAUMNT0

SPECIFICATIONS

Interface Pin Function

Pin Symbol Function
1-5 NC No connection
6 YU Top electrode
7 XL Left electrode
8 YD Bottom electrode
9 XR Right electrode
10-11 VCI Power supply for analog circuits. Connect to an external power supply of 3.0V to 3.6V
12-13 NC No connection
14 RESET The external reset input (RESX)
Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
Fix to IOVCC level when not in use.
15 TE  Tearing effect output pin.
Leave the pin open when not in use.
16 NC No connection (LED PWM)
17-18 GND Power ground
19-20 IOVCC Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V
21 GND Power ground
22 D3P MIPI DSI differential data pair. (Data lane 3)
23 D3N
24 GND Power ground
25 D2P MIPI DSI differential data pair. (Data lane 2)
26 D2N
27 GND Power ground
28 CLKP MIPI DSI differential clock pair
29 CLKN
30 GND Power ground
31 D1P MIPI DSI differential data pair. (Data lane 1)
32 D1N
33 GND Power ground
34 D0P MIPI DSI differential data pair. (Data lane 0)
35 D0N
36 GND Power ground
37 VLED1+ Power for LED1 backlight anode
38 VLED2+ Power for LED2 backlight anode
39 VLED1- Power for LED1 backlight cathode
40 VLED2- Power for LED2 backlight cathode

General Specifications

Item Dimension Unit
Size 8.0 inch
Dot Matrix 800 × 3(RGB) ×1280 dots
Module dimension 115.74 × 184.93 × 7.35 mm
Active area 107.64 × 172.224 mm
Pixel pitch 0.13455 × 0.13455 mm
LCD type TFT, Normally Black, Transmissive
Viewing angle 85/85/85/85
TFT Drive IC ILI9881C or Equivalent
TFT Interface 4-Lanes MIPI
Aspect Ratio 10:16
Backlight Type LED, Normally White
Touch Panel Resistive Touch Panel (RTP)
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 70
Storage Temperature TST -30 80

Electrical Characteristics

Typical Operation Conditions

Item Symbol Values Unit
Min. Typ. Max.
Power supply for analog circuit VCI 3.0 3.3 3.6 V
Power supply for logic circuit IOVCC 1.65 1.8 3.6 V
Current for Driver IVCI - 45 70 mA
I IOVCC - 20 30 mA

Search keyword: tft 8, 8 tft lcd, 8" tft lcd, 8 inch tft lcd, 8 tft display, 8" tft display, 8 inch tft display, tft display 8
go top
close