Home Products TFT Display IPS TFT LCD WF70A9SWAGDNB0

7-inch 800x480 High Brightness, Wide Temperature IPS TFT Display with 10-Point PCAP Touch

Model No. WF70A9SWAGDNB0

►Size : 7 inch
►Resolution : 800x480 dots
►View Direction : 80/80/80/80 (IPS)
►Interface : RGB
►Driver IC:HX8249-A + HX8678-C
►Control-Board : No
►Brightness(cd/m²) : 800
►Frame Through Hole : No
►Touch Screen : Projected Capacitive Touch Panel
►Detect Point : 10 Fingers
►Operating Temperature : -30~+80°C (Wide Temperature)

Description

The WF70A9SWAGDNB0 is a high-brightness 7-inch wide-temperature IPS TFT-LCD display featuring a projected capacitive (PCAP) touch screen with a resolution of 800x480 pixels (WVGA). This module integrates HX8249-A and HX8678-C driver ICs, supporting a 24-bit RGB interface. The display utilizes IPS technology, offering advantages such as wide viewing angles of 80° (left), 80° (right), 80° (up), and 80° (down) (typical values), a contrast ratio of 1000:1 (typical), and a high brightness of 800 nits (typical value) on a glare surface panel, with an aspect ratio of 15:9.

The integrated PCAP touch screen uses the ILI2511 IC, providing a USB interface (I2C available as an option) and supports up to 10-touch functionality.

The WF70A9SWAGDNB0 operates with a supply voltage (VCC) ranging from 2.7V to 3.6V, with a typical value of 3.3V. It functions within a temperature range of -30℃ to +80℃ and can be stored in temperatures from -40℃ to +85℃.

This 7-inch IPS display module is ideal for various medical and industrial control applications. It is used in medical instruments, diagnostic devices, industrial automation robots, control panels, and maintenance equipment. These displays are integral in presenting diverse medical, control, and maintenance data and information, providing clear, reliable visual output in demanding environments. This makes them essential components in medical and industrial control systems, enhancing both functionality and user experience.

DRAWING

7-inch 800x480 High Brightness, Wide Temperature IPS TFT Display with 10-Point PCAP Touch

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 7.0 inch
Dot Matrix 800 x RGB x 480(TFT) dots
Module dimension 165.8 (W) x 106.61 (H) x 8.9(D) mm
Active area 152.40 x 91.44 mm
Pixel pitch 0.1905 x 0.1905 mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
TFT Interface 24-bit RGB
TFT Driver IC HX8249-A + HX8678-C or Equivalent
Aspect Ratio 15:9
Backlight Type LED, Normally White
CTP IC ILI2511 or equivalent
CTP Interface USB (I2C available)
CTP FW Version 6.0.0.0.0.0.0.1
Touch Panel Projected capacitive touch panel (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +80
Storage Temperature TST -40 +85

Electrical Characteristics

Operating conditions

Item Symbol Min Typ Max Unit
Supply Voltage Vcc 2.7 3.3 3.6 V
Current of power supply Icc 101 150 mA
Supply CTP USB_VDD 5V 4.4 5.0 5.5 V
IVDD 5V 83.6 126 mA
 

LED driving conditions

Parameter Symbol Min Typ Max Unit
LED current 450 mA
LED voltage VLED+ 8.1 9.3 10.2 V
LED Life Time 40000 Hr

Interface

1.LCM PIN Definition

Pin Symbol Function
1-4 NC No connection
5 GND Power Ground
6 NC No connection
7 VCC Power voltage
8 NC(MODE) No connection, Input timing is Sync mode.
The pin is already connected to VCC internally.
9 DE Data enable signal for TTL mode.
10 VS Vertical sync input
11 HS Horizontal sync input
12 B7 Blue data(MSB)
13 B6 Blue data
14 B5 Blue data
15 B4 Blue data
16 B3 Blue data
17 B2 Blue data
18 B1 Blue data
19 B0 Blue data(LSB)
20 G7 Green data(MSB)
21 G6 Green data
22 G5 Green data
23 G4 Green data
24 G3 Green data
25 G2 Green data
26 G1 Green data
27 G0 Green data(LSB)
28 R7 Red data(MSB)
29 R6 Red data
30 R5 Red data
31 R4 Red data
32 R3 Red data
33 R2 Red data
34 R1 Red data
35 R0 Red data (LSB)
36 GND Power Ground
37 DCLK Sample clock
38 GND Power Ground
39 NC(L/R) No connection, Horizontal scan direction (Left to right).
The pin is already connected to VCC internally.
40 NC(U/D) No connection, Vertical scan direction (Top to bottom).
The pin is already connected to VCC internally.
41 NC No connection
42 NC No connection
43 NC No connection
44 RESET Reset pin. The chip is in reset state when RESETB=0.
45 NC No connection
46 NC No connection
47 STBYB STBYB Standby mode setting pin.
The chip is in standby mode when STBYB=0.
48 GND Power Ground
49 NC No connection
50 NC No connection

2.Backlight PIN Definition

Pin Symbol Description
1 VLED+ Red, LED_ Anode
2 VLED- Black, LED_ Cathode

3.CTP PIN Definition

Pin Symbol Function
1 USB_VSS System ground
2 USB_VDD 5V Power supply
3 USB_D+ Data +
4 USB_D- Data -
5 VSS System ground
6 SDA I2C data input and output
7 SCL I2C clock input
8 RST External Reset, Low is active
9 INT External interrupt to the host
10 VDDT 3.3 Power supply
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail