5" 800x480 TFT IPS LCD Module with Resistive Touch
Model No. WF50FSYBGDST0
►Size: 5 inch
►Resolution : 800×480 dots
►View Direction : IPS
►Interface : SPI/QSPI
►Driver IC : BT816Q
►Control-Board : Yes
►Brightness(cd/m²) : 650
►Frame Through Hole : Yes
►Touch Screen : Resistive Touch Panel (RTP)
►Operating Temperature : -20~+70°C
Description
WF50FSYBGDST0 is a 5-inch TFT-LCD module with a resistive touch panel (RTP). It features a resolution of 800×480 dots and a brightness of 650 cd/m². The module dimension is 138.7 x 75.8 mm with an active area of 108 x 64.8 mm and a 5:3 aspect ratio. This module is built-in with BT816Q driver IC which supports SPI/ QSPI interfaces.
The module adopts an IPS panel for broader view angles of Left:80 / Right:80 / Up:80 / Down:80 degrees (typical value) and an anti-glare glass surface. The display's supply voltage (VCC) is from 3.1V to 3.5V, and the typical value is 3.3V. WF50FSYBGDST0 can operate at temperatures from -20℃ to +70℃, and its storage temperatures also range from -30℃ to +80℃.
The module adopts an IPS panel for broader view angles of Left:80 / Right:80 / Up:80 / Down:80 degrees (typical value) and an anti-glare glass surface. The display's supply voltage (VCC) is from 3.1V to 3.5V, and the typical value is 3.3V. WF50FSYBGDST0 can operate at temperatures from -20℃ to +70℃, and its storage temperatures also range from -30℃ to +80℃.
DRAWING
SPECIFICATIONS
Interface
LCM PIN Definition (CON5)
Pin | Symbol | I/O | Function |
---|---|---|---|
1 | VDD | P | 3.3V power supply input |
2 | GND | P | Ground |
3 | SCK | I | SPI clock input |
4 | MISO | O | SPI Single mode: SPI MISO output SPI Dual/Quad mode: SPI data line 1 |
5 | MOSI | I | SPI Single mode: SPI MOSI input SPI Dual/Quad mode: SPI data line 0 |
6 | CS | I | SPI slave select input |
7 | INT | OD/O | Interrupt to host, open drain output(default) or push-pull output, active low |
8 | PD_N | I | Chip power down mode control input, active low. Connect to MCU GPIO for power management or hardware reset function |
9 | GPIO2 | I/O | General purpose IO 2 |
10 | GPIO3 | I/O | General purpose IO 3 |
11 | IO2 | I/O | SPI Single/Dual mode: General purpose IO 0 SPI Quad mode: SPI data line 2 |
12 | IO3 | I/O | SPI Single/Dual mode: General purpose IO 1 SPI Quad mode: SPI data line 3 |
13 | NC | - | No connection |
14 | NC | - | No connection |
15 | NC | - | No connection |
16 | NC | - | No connection |
17 | VLED | P | 5V power supply input |
18 | VLED | P | 5V power supply input |
19 | GND | P | Ground |
20 | GND | P | Ground |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 5 | inch |
Dot Matrix | 800× 3(RGB) × 480 | dots |
Module dimension | 138.7 (W) x 75.8 (H) x 12.8(D)(MAX) | mm |
Active area | 108 x 64.8 | mm |
Pixel pitch | 0.135(W) ×0.135(H) | mm |
LCD type | TFT, Normally Black, Transmissive | |
Viewing Angle | 80/80/80/80 | |
Aspect Ratio | 5:3 | |
Backlight Type | LED, Normally White | |
TFT Controller IC | BT816Q | |
TFT Interface | SPI/QSPI | |
Touch Panel | Resistive Touch Panel | |
Surface | Anti-Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage For VDD | VDD | - | 3.1 | 3.3 | 3.5 | V |
Supply Current For VDD | IDD | VDD=3.3V | - | 96 | 144 | mA |
Supply Voltage For VLED | VLED | - | 4.5 | 5 | 5.5 | V |
Supply Current For VLED | ILED | VLED=+5V | - | 334 | 500 | mA |
Search keyword: tft 5", 5 tft lcd, 5" tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5" tft display, 5 inch tft display, tft display 5"