Home Products TFT LCD TFT Panel + Controller Board WF35PTIBCDBN0

TFT LCD with Controller Board 3.5"

Model No. WF35PTIBCDBN0

►Size : 3.5 inch
►Resolution : 320 x 240 dots
►View Direction : 12H
►Interface : MCU
►Controller IC:RA8875
►Control-Board : Yes
►Brightness(cd/m2) : 420
►Frame Through Hole : Yes
►Touch Screen : No

Description

WF35PTIBCDBN0 is a 3.5-inch TFT LCD Module with a resolution of 320x240 pixels and an aspect ratio of 4:3. Its module dimensions are 93.5 x 66.44 mm, and the active area size is 70.08 x 52.56 mm. This module features a control board and a built-in RA8875 controller IC with 8080 MPU interface support.

Winstar P Series TFT Display Features:

  • The TFT display module primarily employs the RA8875 Controller IC, which is integrated with a standardized 36-pin MCU 8080 8/16-bits Pin define, and 8/16-bits 6800 Pin define Interface can be selected through Jump.
  • Pin no. 33 ~ 36 are pre-defined as backlight supply, eliminating the need for designing extra backlight circuitry.
  • Users can request external expansion of Chinese fonts (optional) and flash memory.
  • Through the built-in PWM Command of the RA8875 IC, backlight control and DMA (Direct Memory Access) for accelerated graphical operations are facilitated.
  • Additionally, it integrates a built-in 4-wire resistive touch panel controller, which is only applicable to P Series TFT models equipped with resistive touch.
 

The WF35PTIBCDBN0 TFT LCD module with brightness is 420 cd/m2 with contrast ratio 350:1. LCM voltage ranges from 3V-3.6V, typical value is 3.3V. Operating temperature covers from -20~+70℃, storage temperature range is from -30~+80℃.

DRAWING

WF35PTIBCDBN0 - 3.5 inch TFT LCD with Controller Board

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 3.5 inch
Dot Matrix 320 × RGB × 240 dots
Module dimension 93.5 × 66.44 × 8.6 mm
Active area 70.08 × 52.56 mm
Dot pitch 0.073 × 0.219 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED ,Normally White
Controller IC RA8875
Interface Digital 8080 family MPU
Touch Screen Without touch screen
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD - 3.0 3.3 3.6 V
Supply Current For LCM IDD - - 50 75 mA
Power Consumption   - - 165 270 mW

Interface

Pin Symbol Function
1 GND System ground
2 VDD Power Supply : +3.3V
3 NC No connect
4 RS Data / Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~22 DB0~DB15 Data bus
23 WAIT Wait Signal Output(H:active)
24 NC No connect
25 CS Chip select
26 RST Hardware reset
27~32 NC No connect
33~34 VLED- Power for LED backlight cathode
35~36 VLED+ Power for LED backlight anode
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail