Model No. WFN0360A2T0YAMNN000
►Size : 3.6-inch (Portrait mode)
►Resolution : 280x712 dots
►View Direction : IPS
►Interface:MIPI DSI
►Driver IC : FL7703NI
►Control-Board : No
►Brightness(cd/m²): 500
►Frame Through Hole : No
►Touch Screen : Without Touch Panel
The WFN0360A2T0YAMNN000 is a 3.6-inch bar type TFT-LCD display module in portrait orientation. This 3.6-inch TFT display features a 280×712 pixel resolution, IPS panel technology with 85/85/85/85 wide viewing angles, 500 cd/m² brightness, and a 1200:1 contrast ratio. It uses a 4-lane MIPI interface, anti-glare surface, and the FL7703NI driver IC (or equivalent).
With its long-format bar type design, this 3.6-inch TFT module is ideal for Pro Audio systems, 1U rackmount audio equipment, power management systems, and indoor medical devices.
| Item | Dimension | Unit |
|---|---|---|
| Size | 3.6 | inch |
| Dot Matrix | 280 x RGB x 712 (TFT) | dots |
| Module dimension | 38.2 x 101.48 x 4.03 | mm |
| Active area | 33.6 x 85.44 | mm |
| Pixel pitch | 0.12 X 0.12 | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| Viewing Angle | 85/85/85/85 | |
| TFT Interface | 4-Lanes MIPI | |
| Backlight Type | LED ,Normally White | |
| TFT Driver IC | FL7703NI or Equivalent | |
| Touch Panel | Without Touch Panel | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Analog Supply voltage | VCC | 2.5 | 2.8 | 3.3 | V |
| Analog supply current | ICC | - | 65 | 98.0 | mA |
| Logic input voltage | VIH | 0.7*VCC | - | VCC | V |
| VIL | GND | - | 0.3*VCC | V |
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| LED current | - | - | 90 | - | mA |
| LED voltage | VLED+ | 5.5 | 6.0 | 6.8 | V |
| LED Life Time | - | 50,000 | - | - | Hr |
| Pin No. | Symbol | Description |
|---|---|---|
| 1 | GND | Ground. |
| 2 | D3N | MIPI data input pins |
| 3 | D3P | |
| 4 | GND | Ground. |
| 5 | D2N | MIPI data input pins |
| 6 | D2P | |
| 7 | GND | Ground. |
| 8 | CLKN | MIPI clock input pins. |
| 9 | CLKP | |
| 10 | GND | Ground. |
| 11 | D1N | MIPI data input pins |
| 12 | D1P | |
| 13 | GND | Ground. |
| 14 | D0N | MIPI data input pins |
| 15 | D0P | |
| 16 | GND | Ground. |
| 17 | GND | Ground. |
| 18 | TE | Tearing effect output pin to synchronize to frame writing. If not used, open this pin |
| 19 | RESET | Reset signal pin |
| 20 | GND | Ground. |
| 21-23 | VCC | Power supply |
| 24 | GND | Ground. |
| 25-26 | NC | Not connect |
| 27-28 | VLED- | LED cathode |
| 29-30 | VLED+ | LED anode |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.