Model No. WF70A9SWAGLNN0
►Size : 7 inch
►Resolution : 800x480 pixels
►View Direction : 80/80/80/80 (IPS)
►Interface : LVDS
►Driver IC：HX8249-A + HX8678-C
►Control-Board : No
►Brightness(cd/m²) : 1000
►Frame Through Hole : No
►Touch Screen : No
►Operating Temperature : -30~+80 °C (Wide Temperature)
WF70A9SWAGLNN0 is a 7-inch high brightness ultra wide temperature IPS TFT LCD display with an 800×480 resolution and an LVDS interface. This model is equipped with HX8249-A and HX8678-C driver ICs.
The display provides a typical brightness of 1000 cd/m² and a contrast ratio of 1000:1. The IPS panel offers wide viewing angles (80/80/80/80, typical) and features an anti-glare surface with a 15:9 aspect ratio. The module dimension is 165.8 × 106.61 × 6.5 mm, with an active area of 152.40 × 91.44 mm.
The logic supply voltage (VCC) ranges from 2.7V to 3.6V, with a typical value of 3.3V. The module supports ultra wide temperature operation from -30°C to +80°C and can be stored from -40°C to +85°C.
| Item | Dimension | Unit |
|---|---|---|
| Size | 7.0 | inch |
| Dot Matrix | 800 x RGB x 480(TFT) | dots |
| Module dimension | 165.8 (W) x 106.61 (H) x 6.5(D) | mm |
| Active area | 152.40 x 91.44 | mm |
| Pixel pitch | 0.1905 x 0.1905 | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 80/80/80/80 | |
| TFT Interface | LVDS | |
| TFT Driver IC | HX8249-A + HX8678-C or Equivalent | |
| Aspect Ratio | 15:9 | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Without Touch Panel | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -40 | － | +85 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | Vcc | 2.7 | 3.3 | 3.6 | V |
| Current of power supply | Icc | － | 133 | 200 | mA |
| Pin | Symbol | Function | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | VCC | Power voltage | |||||||||
| 2 | VCC | Power voltage | |||||||||
| 3 | GND | Power Ground | |||||||||
| 4 | GND | Power Ground | |||||||||
| 5 | LVD0N | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 6 | LVD0P | ||||||||||
| 7 | GND | Power Ground | |||||||||
| 8 | LVD1N | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 9 | LVD1P | ||||||||||
| 10 | GND | Power Ground | |||||||||
| 11 | LVD2N | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 12 | LVD2P | ||||||||||
| 13 | GND | Power Ground | |||||||||
| 14 | LVDSCKN | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 15 | LVDSCKP | ||||||||||
| 16 | GND | Power Ground | |||||||||
| 17 | LVD3N | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 18 | LVD3P | ||||||||||
| 19 | DINT | Input data format selection. Effective when FCS=1.
|
|||||||||
| 20 | SC | RL&TBSelection 1: Left to Right, Top to Bottom. (Default) 0: Right to Left, Bottom to Left. |
| Pin | Symbol | Description |
|---|---|---|
| 1 | VLED+ | Red, LED_ Anode |
| 2 | VLED- | Black, LED_ Cathode |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
